Model Engineering Works

We manufacture heavy duty planner for various industrial and engineering use. Specification of our heavy duty planner are:-

• The Table: It is of box section with hand scrapped 'V' ways to bear heavy load. It is heavily ribbed & the Rack provided in it is spur milling cut & non wearing quality for smooth running. Adequate number of 'T' slots are also provided to clamp the work-piece precisely & securely.
• Lubrication: This machine has automatic lubricating system. Forced pump has been provided to facilitate the lubrication of bearing surface. Wiper fitting & oil filter trays have been fitted to keep 'V' guides clean of oil, to avoid oil wastage & filtering of oil.
• The Bed: The bed is made from high duty alloys grey casting having proper strength & long wearing qualities. It is deep box section & tied together at frequent intervals by double walled bridge pieces extended to the bottom of bed. The 2 'V' guides are accurately hand scrapped upto extreme limits.
• The Gearing: The main bearings for gearings are cast solid with the bed and Gear Teeth are Hob Cut. Helical gears are of finest quality material & are strong enough to stand increased cutting & quick return speed Gun metal bearings have been provided for all the shafts & ball bearings for loose pulleys.
• The Columns: The uprights are of rigid box section firmly, bolted on the bed for precise alignment are capable of absorbing the heaviest shocks without vibration. Location pins are provided to help refit machine accurately after once it is dismantled. Designed for permanent fitting of the side tool posts.
• The Cross Rail: It is of box section heavily ribbed with large surface & suitable for both hand & automatic horizontal & vertical feeds.
• The Tool Posts: These all are made out of close grain castings & steel to stand heavy cut. Special type of Dog Clutch fittings are provided for vertical lifting. It can be driven both manually and mechanically.

We manufacture Pillar Drilling Machine with following features and specifications .
Features of our Pillar Drilling Machines

• Rigid machine structure for vibration free machining.
  
• Machine base is reinforced by ribs, for extra rigidity & stability.
  
• Pillar bracket is made in octagonal shape which acts like rib giving more rigidity.
  
• Spindle all the machines have six spline and supported through taper roller bearings to withstand thrust load.
  

Specifications	Model MEW-15B	Model MEW-20B	Model MEW-25	Model MEW-32	Model MEW-40
Drilling Capacity in Mild Steel	13 mm	20 mm	25 mm	32 mm	40 mm
Max. Distance between Spindle and Base Plate	610 mm	690 mm	1050 mm	1050 mm	1125 mm
Max. Distance from Spindle Center to Column Center	205 mm	216 mm	300 mm	310 mm	350 mm
Max. Distance from Spindle Nose to Working Table	275 mm	375 mm	550 mm	560 mm	625 mm
No. of Spindle Speeds	5	5	5	5	5
Spindle Travel	110 mm	110 mm	125 mm	125 mm	140 mm
Range of Spindle Speeds RPM	375-2650	375-2650	150-1200	150-1200	110-1050
Round Table Working Surface	230 mm	250 mm	325 mm	335 mm	380 mm
Main Drive Motor H.P	1	1	1	1.5	2

Model Planer Machine is modern design and efficient features which helps in increasing the effectiveness and productivity of the product. The machine is available with following features.
 

Model Cat No.	MEW 191	MEW 192	MEW 193	MEW 194	MEW 195	MEW 196	MEW 197	MEW 198
Working stroke	6 ft	8ft	10ft	12ft	8ft	10ft	12ft	16ft
Admit in Columns x job height	54” x 48”	54” x 48”	54” x 48”	54” x 48”	60” x 54”	60” x 54”	60” x 54”	60” x 54”
V to V Centre (in Bed)	20”	20”	20”	20”	23”	23”	23”	23”
Bed Width	24”	24”	24”	24”	27”	27”	27”	27”
Table Width	33”	33”	33”	33”	37”	37”	37”	37”
Tool Down Feed	10”	10”	10”	10”	12”	12”	12”	12”
No. of Tool Posts	2	2	2	2	2	2	2	2
Drive Motor HP	3HP	5HP	5	5	7.5	7.5	7.5	7.5
Approx wt. (kg)	6000	7000	8500	9500	8800	9800	11200	14000

Radial drilling machines are designed to offer rigidity, precision and ease in operation. Some of these machines are built to withstand static as well as sever dynamic loads. These machines have a higher work piece capacity than uprights. Various types of radial machines like standard, horizontal spindle, and universal radial drilling machines
 

Specifications	Model MEW-32	Model MEW-40	Model MEW-50
Drilling Capacity in Mild Steel	32 mm	40 mm	50 mm
Max. Distance between Spindle and Base	825 mm	1000 mm	1250 mm
Maximum Drilling Radius	750 mm	1050 mm	1300 mm
Spindle Travel	175 mm	180 mm	250 mm
Range of Spindle Speeds RPM	90-900	90-900	45-1000
No. of Spindle Speeds	6	6	12
No. of Spindle Feeds	3	3	6
Range of Spindle Feeds mm/ rev.	0.1-0.4	0.1-0.4	0.12-1.25
Main Drive Motor	2 HP	3 H.P	5 H.P
Elevating Motor	1 H.P	2 H.P	3 H.P

A deep cut high deep cut high metal removal and sustained accuracy. The shapping machine is naturally casting. All castings are ribbed to withstand shockloads. Gears are made on high Precision Gear Shaper and tooth rounded for easy sliding. C.I. casting confirming to IS:210 ensure long life of the machine. All alignments confirm to IS:2310-1989. All the components manufactured are inspected and approved by qualified & experienced engineers at every stage. The shaping machine is specially for increased production, precision performance and deep cut.

Technical Data

Description	Model 300	Model 450	Model 600	Model 750	Model 900	Model 1000
Maximum Stroke (mm)	350	500	650	800	950	1050
Max. distance Table to Ram (mm)	300	385	460	510	550	600
Min. distance Table to Ram (mm)	40	40	50	50	75	75
Lenght & Width of Table Top (mm)	300 x 225	460 x 310	610 x 360	760 x 400	910 x 450	1015 x 500
Lenght Of Cross Slide (mm)	600	810	950	1000	1300	1375
Ram Speed (Nos.)	3	3	4	4	4	4
Ram Speed in case of all Geared (Nos.)	4	4	6	6	6	6