Cut Section Models

This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.

_{This model is made out of original new part, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.}

_{This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.}

_{This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.}

This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.

_{This model is made out of original used parts, will be suitably sectioned and arranged to demonstrate the internal construction details showing the minute information with suspension strut with spring and shock absorber, disc brake, calipers, drive shaft etc. , and working of the same can be shown, the model will be suitably painted and the entire model is mounted on a sturdy iron frame.}

_{This model is made out of original used parts, will be suitably sectioned and arranged to demonstrate the internal construction details showing the minute information with suspension system with longitudinal torsion bar arrangement, shock absorber, etc. , and working of the same can be shown, the model will be suitably painted and the entire model is mounted on a sturdy iron frame.}

_{This model is made out of original used parts, will be suitably sectioned and arranged to demonstrate the internal construction details showing the minute information with suspension strut with spring and shock absorber, disc brake, calipers drive shaft etc. , and working of the same can be shown, the model will be suitably painted and the entire model is mounted on a sturdy iron frame.}

_{The Four stroke Diesel engine setup will be prepared by using good working condition multi cylinder diesel engine with all the fittings of the engine along with air filter, starter, battery, alternator, indication meters, fuel tank ,electrical wiring etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) .}

_{All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done and painted with a single colour paint.}

_{a.      Tata Car turbo charged Engine assembly}                                   

_{b.      Tata Sumo Turbo charged Engine assembly}

                 _{with rotary type Fuel injection Pump.}                                         

_{c.       Mahindra 540 Engine assembly}     

          _{d. Ambassador Isuzu Diesel Engine assembly}                                    

          _{e.  Tata Sumo Non Turbo Engine assembly}                                       

                _{f. Tata Safari turbo charged engine assembly}                                   

         _{g.    Ford 1.4 ZXi}                                                          

        _{h. Hyundai Accent/ScorpioCRDI Engine assembly.}                          

_{The Four stroke petrol engine setup will be prepared by using good working condition multi cylinder car engine with all the fittings of the engine along with radiator, silencer, air filter, starter, battery, alternator, indication meters, fuel tank ,electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley) .}

   _{All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done so that by cranking the ignition the engine will start working, the indications such as alternator charging, oil pressure, temperature etc., will be displayed on to the necessary indication meter attached.  The engine assembly will be serviced ,painted with a single colour paint.}

    _{MPFI engines will be fitted with  all necessary sensors, injectors  and other MPFI accessories,  ECU  etc., which will be duly connected by its original wiring harness and will be made to  work along with necessary indications.}

 _{a. Ambassodor Isuzu MPFI Engine setup}                                           

_{b.      Maruthi 800 CC/Omni MPFI    Engine setup}                                

                   _{c. Santro MPFI Engine setup}                                                                 

_{a.      Maruthi OMNI/800 cc carburator Engine setup}                                  

                 _{e.  Maruthi Zen/Alto/EsteemMPFI  Engine setup}                                 

                 _{f.    Maruthi Zen/Alto/Esteem(Carburator)  Engine setup}                         

The two stroke petrol engine setup will be prepared by using good working condition engine with all the fittings of the engine along with silencer, air filter, fuel tank ,electrical wiring with ignition switch etc. , all mounted on to a sturdy iron frame with caster wheels (mobile trolley) .

All the fittings such as fuel tank,  etc. , along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. .   the engine assembly will be serviced ,painted with a single colour paint.

a.  Bajaj chetak engine assembly                                                         rs.     14,900. 00

b. Suzuki samurai assembly                                                                rs.    24,800. 00

c.  Yamaha engine assembly                                                                 rs.    21,800. 00

d. TVS super xl (electronic ignition engine)                                    rs.    15,950. 00

This model is made out of original used parts, will be suitably sectioned and arranged to demonstrate the internal construction details showing the minute information such as ac compressor, condenser, radiator, its pipe lining, blower/fan assembly etc. ,  the model will be suitably painted and the entire model is mounted on a sturdy iron frame.

This model is made out of original used parts, will be suitably sectioned and arranged to demonstrate the internal construction details showing the minute information such as ac compressor, condenser, radiator, its pipe lining, blower/fan assembly etc. ,  the model will be suitably painted and the entire model is mounted on a sturdy iron frame.

This model is made out of original used parts, will be suitably sectioned And Arranged to demonstrate the internal construction details showing the minute information such as the disc brake assembly, master cylinder on the handle, its piping, front wheel assembly with disc , handle bar with cylinder and brake lever etc., and working of the same can be show by operating the brake lever, the model will be suitably painted and The entire model is mounted on a sturdy iron frame.

This model contain two disc brakes in the front and two drum brakes at the rear and it is made out of original parts such as two master cylinder assembly (one sectioned and one working), wheel cylinder, brake drum, brake shoes, calipers etc. , suitably sectioned and mounted on a sturdy iron frame. By operating the lever provided, the working procedure of the model can be demonstrated.

Model No. MT-34This model is made out of original parts such as Two Brake drum assembly, two master cylinder (one sectioned), wheel cylinders (one sectioned), Brake Shoes, etc., the model can be demonstrated by operating the lever provided.

The Model is made out of Orginal parts such as Two Brake disc, two Caliper assembly (one sectioned), two master cylinder (one sectioned) etc, the model is mounted on a sturdy iron frame and can be demonstrated by operating the lever provided.

The model is made out of Original parts such as Air compressor, Unloader valve, foot valve, Booster, Wheel assembly, air tank, control valve etc Suitably sectioned and mounted on a sturdy iron frame.

Model no. MT-30

This model is made out of original used parts such as brake drum, brake shoes, brake peddle, etc. , suitably sectioned and mounted on a wooden base. By operating the brake drum and applying the brake pedal this model can be demonstrated.

Model no. MT-29

This model is made out of original used light vehicle, suitably sectioned to show the action of differential gear box and brake drums in rear axle. A crank handle is provided to demonstrate the model. The whole model is mounted on a sturdy iron frame.

Model no. MT-28this model is made out of original used heavy vehicle parts, suitably sectioned to show clearly the action of differential gear box, such as pinion crown wheel in differential and brake drums in rear axle, a crank handle is provided to demonstrate the model. The model is mounted on a sturdy iron frame.

Model No. MT-27.This model is made out of original New parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.

Model no. MT-25

This model is made out of original used parts such as flywheel, clutch plates, etc. To demonstrate the working of clutch assembly. By operating the pedal provided the model can be demonstrated. The entire model is mounted on a sturdy iron frame.

Model no. MT-24. This model is made out of original full size used transfer case, suitably sectioned to show the gear mechanism of forward and reverse speeds. A crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame. The model will be finished by suitable colour painting.

Model No. MT-22

The model is made out of full size original used automatic transmission of a car, the transmission will be suitably sectioned to show the internal details,of gear mechanism of forward and reverse speeds. The automatic shifting of the gears can be explained using this model clearly.

The model will be mounted on to a tubular frame, Suitable color imported painting will be carried out along with Miracle coating for the model will be done for extra gloss and shine. The painting will be carried out in such a way that different colors will be use for different components such as identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears will be suitably electroplated.

Model No.MT-20This mode is made out of original full size used gearbox, suitably sectioned to show the gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.

Model No.MT-19

This mode is made out of original full size used gearbox, suitably sectioned to show the gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.

\Model No.MT-18

This is made out of original full size used gearbox, suitably sectioned to show the details of gear mechanism of forward and reverse speeds. A Crank lever is provided to demonstrate the mechanism. Complete unit is mounted on a sturdy iron frame.

Model No. MT-17

This model is made out of original used parts, will be suitably sectioned And Arranged to demonstrate the internal construction details showing the minute information such as steering gear box, bell assembly, tyre rod , linkages, stub axle etc., and working of the same can be show by steering the steering wheel provided, the model will be suitably painted and The entire model is mounted on a sturdy iron frame

Model no. MT-16

This model is made out of full size original parts, suitably sectioned and to demonstrate the working of steering wheel worms, steering arm, etc. , the arrangement of wheels and axle connecting to steering system will be done so the movement of the wheels when rotating the steering wheels can be displayed .

The model will be mounted on to a tubular frame, suitable color imported painting will be carried out along with miracle coating for the model will be done for extra gloss and shine. The painting will be carried out in such a way that different colors will be use for different components such as identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears will be suitably electroplated

Model No.MT-15This model is made out of full size original parts, suitably sectioned and to demonstrate the working of Steering wheel worms, Steering arm, etc., is mounted on a sturdy iron frame.

Model No.MT-12The model is made out of used single cylinder Diesel engine. Maximum parts such as piston, cylinder, cylinder head, inlet and Exhaust manifolds, Fuel Injection pump, oil pump, Fuel Filter, Injector, etc., are sectioned to show the internal constructional details of the engine. The working of individual parts and accessories like Valves, piston, pumps, Crank, Camshaft, etc., can be demonstrated. This model is fixed on a sturdy iron frame.

Model no. MT-11

The model is made out of full size original four stroke, four cylinders used crdi diesel engine. Maximum parts and accessories like three cylinders, cylinder head, inlet and exhaust manifolds, fuel rotary pump, oil pump, water pump, fuel filter, injector, self starter, alternator, etc. Are sectioned to show the internal constructional details of engine. The working of individual part and accessories like valves, pistons, pumps, crank and camshaft, etc. Can be demonstrated. This model is provided upto flywheel and the model is mounted on a sturdy iron frame. The model is coupled to f. H. P 220/230v a. C. Motor, through a reduction gear unit to get the slow speed rotation of the flywheel and the engine around 15 to20 RPM.

Model No. MT-10

The model is made out of full size original four, four strokes used diesel engine. Maximum parts and accessories like four cylinders, cylinder head, inlet and exhaust manifolds, fuel pump, oil pump, water pump, fuel filter, fuel injection pump, injectors, self-starter, altenator, etc are sectioned to show the internal constructional details of the engine. Af. H. P. 220/230v a. C. Motor is coupled through a reduction drive unit to the engine by which the model can be demonstrated at very low speed of about 15 to 20 RPM.

By running the engine, the working of individual parts and accessories like crankshaft, camshaft, connecting rod, pistons, valves, different pumps, etc can be demonstrated.

This model is provided upto flywheel and complete engine is mounted on a sturdy iron frame.

Model no. MT-04

The model is made out of full size original four stroke, four cylinders, used mpfi engine, gear box, clutch etc the engine is fitted with mpfi system and the entire system is controlled electronically by the electronic control unit through its supporting sensors. The maximum parts and accessories of the engine like four cylinders of the cylinder block, cylinder heads, valve ports, piston, connecting rod, inlet and exhaust manifolds, throttle body, distributor, ecu, canister purge valve, carbon canister, thermostat housing, petrol injector, water pump, oil pump, oil pan, air filter, self-starter, alternator clutch, gear box etc are sectioned to clearly demonstrate the internal constructional details. The reduction gear unit will be coupled to the flywheel of the engine assembly, which is then coupled to the single phase ac motor. So that by running the electric motor the entire function of the engine can be demonstrated .

The engine is coupled with five forward and one reverse transmission. The gearbox is coupled to the engine through the diaphragm clutch and gear selection is done by shifting the gear shift control lever. The bell housing will be sectioned to show the clutch connected to the flywheel and the clutch housing will be sectioned to show the diagram spring pressure plate, the clutch will be made operational through its original mechanical system fabricated on to the stand to which the whole system is mounted, so that by operating clutch pedal the engagement and disengagement of the clutch can be demonstrated. The gearbox will be suitable sectioned to demonstrate the gear mechanism, shifter mechanism etc, and shifting the gear lever the complete operating of the gear box can be demonstrated. And will be coupled to the engine assembly. Through the clutch so that by working the engine the entire system of engine to clutch and gear box can be demonstrated working.

The whole system is mounted on to a sturdy iron frame, and the frame will be provided with caster wheels for easy movement of the entire model. Suitable color imported painting will be carried out along with miracle coating for the model will be done for extra gloss and shine. The painting will be carried out in such a way that different colors will be use for different components such as air, oil, petrol, exhaust identification of sectioned area etc according to the colors code for easy identification of different systems and mechanisms. All the hardware’s and gears will be suitably electroplated. A switch box with indicator switch will be provided

Model no. MT-08

The model is made out of full size original six cylinder, four strokes used diesel engine. Maximum parts and accessories like five cylinders, cylinder head, inlet and exhaust manifolds, fuel pump, oil pump, water pump, fuel filter, fuel injection pump, injectors, self-starter, dynamo, etc are sectioned to show the internal constructional details of the engine. Af. H. P. 220/230v a. C. Motor is coupled through a reduction drive unit to the engine by which the model can be demonstrated at very low speed of about 15 to 20 RPM.

By running the engine, the working of individual parts and accessories like crankshaft, camshaft, connecting rod, pistons, valves, different pumps, etc can be demonstrated.

This model is provided upto flywheel and complete engine is mounted on a sturdy iron frame.

Model no. MT-01

The model is made out of full size original used car/van chassis consisting of the four stroke mpfi petrol engine. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.

Engine:

maximum parts and accessories of an engine like of the cylinders, cylinder head, inlet and exhaust manifolds, common rail, cmp sensor, throttle body, ecu, self-starter, alternator, water pump, radiator, etc, are sectioned to show the internal constructional details.

this complete sectioned models is coupled with 1/4 hp 220/230v a. C single phase motor through a reduction drive unit. By running the motor the complete working details of the individual parts, different mechanisms can be demonstrated as the model is running at a very low speed (about 15 to 20 rpm).

Transmission system:

it consists of a clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The hydraulic circuit from the pedal to the clutch is active and will help to demonstrate the response of hydraulic systems. The gearbox is coupled to differential gear box with an axle and the different coupling used for this transmission can be demonstrated. The differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the differential gear box can be seen while gear shifting.

Fuel system:

the fuel tank is cut to expose the mounting of the level sensor and tank module and the position of fuel section.

Exhaust system:

it consists of exhaust manifold and silencer in cut section to explain internal construction.

Lubrication system:

it consists of the engine lubrication system along with the lubrication oil pump.

Suspension system:

this will explain both the hydraulic suspension systems at the front and the leaf spring suspension at the rear. One of the hydraulic arrangements of suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.

Braking system:

this hydraulic circuit of the hydraulic braking mechanism is operational. The movement of the brake shoes on operating the pedals can be seen in the area where the brake drum is cut (front wheel brake drum). The rear brakes cannot be demonstrated hydraulically but it is shown using hand braking system that is by using cables.

Steering mechanism:

this can be seen and included in the steering wheel, steering gear and coupling at the wheels.

Electrical system:

the electrical system gives a complete idea of the electrical system and circuit of a car. It has been provided with sectionised battery and terminals are provided to connect another working battery to show the working of the individual parts and accessories such as a sectionised self starter, dynamo, wiper motor, cutout, distributor, horn relay, etc. , and working of head light brake light, side indicator, horn, parking lights, spark in spark plugs, etc.

Model no. MT-02

The model is made out of full size original used car chassis consisting of the four stroke petrol engine. The cut section model is constructed such that all following systems can be demonstrated in working conditions.

Engine:

Maximum parts and accessories of an engine like three of the cylinder, cylinder head, inlet and exhaust manifolds, carburator, distributor, self-starter, alternator, water pump, radiator, etc, are sectioned to show the internal constructional details.

This complete sectioned models is coupled with 1/4 hp 220/230v a. C single phase motor through a reduction drive unit. By running the motor the complete working details of the individual parts, different mechanisms can be demonstrated as the model is running at a very low speed (about 15 to 20 rpm).

Transmission system:

It consists of a clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The hydraulic circuit from the pedal to the clutch is active and will help to demonstrate the response of hydraulic systems. The gearbox is coupled to differential gear box with an axle and the different coupling used for this transmission can be demonstrated. The differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the differential gear box can be seen while gear shifting.

Fuel system:

The fuel tank is cut to expose the mounting of the level sensor and the position of fuel section. The system is complete with mechanical fuel pump.

Exhaust system:

It consists of exhaust manifold and silencer in cut section to explain internal construction.

Lubrication system:

It consists of the engine lubrication system along with the lubrication oil pump.

Suspension system:

This will explain both the hydraulic suspension systems at the front and the leaf spring suspension at the rear. One of the hydraulic arrangements of suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.

Braking system:

This hydraulic circuit of the hydraulic braking mechanism is operational. The movement of the brake shoes on operating the pedals can be seen in the area where the brake drum is cut (front wheel brake drum). The rear brakes cannot be demonstrated hydraulically but it is shown using hand braking system that is by using cables.

Stearing mechanism:

This can be seen and included in the stearing wheel, stearing gear and coupling at the wheels.

Electrical system:

The electrical system gives a complete idea of the electrical system and circuit of a car. It has been provided with sectionised battery and terminals are provided to connect another working battery to show the working of the individual parts and accessories such as a sectionised self starter, dynamo, wiper motor, cutout, distributor, horn relay, etc. , and working of head light brake light, side indicator, horn, parking lights, spark in spark plugs, etc.

Model no. MT-07

The maximum parts and accessories like, three cylinder, cylinder head, inlet and exhaust manifolds, carburator, oil pump, fuel pump, distributor, self starter, water pump etc. , are sectioned to show the internal constructional details. Miniature bulbs are provided with each spark plug, to show the sequence of firing order while the engine is run for demonstration. This model is mounted on a sturdy iron frame. The model is coupled to a 1/4 h. P. Single phase, 220/230v ac motor, through a reduction drive unit, to get the slow speed rotation of the flywheel and the engine. (around 15 to 20 rpm). The operation of gearbox assembly and clutch assembly can be demonstrated using the levers provided.

Model no. MT-05  

The model is made out of full size original four stroke, four cylinders, used car engine. Maximum parts and accessories like three of the cylinder, cylinder head, inlet and exhaust manifolds, fuel pump, oil pump, etc. Are sectioned to show the internal constructional details, miniature bulbs are provided with spark plug to show the sequence of firing order, while the engine is running for demonstration. This is made upto flywheel and is mounted on a sturdy iron frame. The model is coupled to a f. H. P single phase 220/230 v a. C. Motor through a reduction gear unit to get the low speed rotation of the flywheel and the engine (around 15 to 20 rpm).

Model no. MT-09

The model is made out of full size original four stroke, four cylinders used diesel engine. Maximum parts and accessories like three cylinders, cylinder head, inlet and exhaust manifolds, fuel injection pump, oil pump, water pump, fuel filter, injector, self starter, alternator etc. Are sectioned to show the internal constructional details of engine. The working of individual part and accessories like valves, pistons, pumps, crank and camshaft, etc. Can be demonstrated. This model is provided upto flywheel and the model is mounted on a sturdy iron frame. The model is coupled to f. H. P 220/230v a. C. Motor, through a reduction gear unit to get the slow speed rotation of the flywheel and the engine around 15 to20 RPM.

_{This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.}

_{This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.}

_{This model is made out of original used parts, will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a navopan wooden base.}

_{This model is made out of original used parts, will be suitably sectioned and arranged to demonstrate the internal construction details showing the minute information with leaf spring is arranged along with shock absorber  etc. , and working of the same can be shown, the model will be suitably painted and the entire model is mounted on a sturdy iron frame.}

_{The four stroke diesel engine setup will be prepared by using good working condition single cylinder diesel engine with all the fittings of the engine along with air filter, silencer, fuel filter, fuel tank etc. , all mounted on to a sturdy iron frame with caster wheels (mobile trolley) . The engine will be  painted with a single color paint.}

_{The Four stroke petrol engine with CNG setup will be prepared by using good working condition multi cylinder car engine with all the fittings of the engine along with radiator, silencer, air filter, starter, battery, alternator, indication meters, fuel tank, CNG tank  ,electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley).}

   _{All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done so that by cranking the ignition the engine will start working, the indications such as alternator charging, oil pressure, temperature etc., will be displayed on to the necessary indication meter attached.  The engine assembly will be serviced ,painted with a single colour paint.}

_{MPFI engines will be fitted with  all necessary sensors, injectors  and other MPFI accessories, ECU etc., which will be duly connected by its original wiring harness and will be made to  work along with necessary indications.}

_{a. Ambassodor Isuzu MPFI Engine With CNG setup}                        

_{b. Maruthi 800 CC/Omni MPFI Engine With CNG setup}                 

_{c.  Santro MPFI Engine With CNG setup}                                              

_{d.Maruthi OMNI/800 CC carburator Engine With CNG setup}                

_{e.  Maruthi Zen/Alto/Esteem MPFI  Engine With CNG setup}                  

Model no. MT-06

The maximum parts and accessories like, three cylinder, cylinder head, inlet and exhaust manifolds, common rail, CMP sensor, throttle body, ecu, self-starter, alternator, water pump, radiator,clutch, gear box etc. , are sectioned to show the internal constructional details. This model is mounted on a sturdy iron frame. The model is coupled to a 1/4 H. P. Single phase, 220/230v ac motor, through a reduction drive unit, to get the slow speed rotation of the flywheel and the engine. (around 15 to 20 rpm). The operation of gearbox assembly and clutch assembly can be demonstrated using the levers provided.

Model no. MT-03.

Engine:

maximum parts and accessories of an engine cylinder, cylinder head, inlet and exhaust manifolds, self-starter, magneto charger, water pump, etc, are sectioned to show the internal constructional details.

 Transmission system:

It consists of a clutch and gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The circuit from the pedal to the clutch is active and will help to demonstrate systems. The gearbox is coupled to differential gear box with an axle and the different coupling used for this transmission can be demonstrated. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the differential gear box can be seen while gear shifting.

Fuel system:

The fuel tank is cut to expose the mounting of the level sensor and the position of fuel section. The system is complete with fuel pump.

Exhaust system:

It consists of exhaust manifold and silencer in cut section to explain internal construction.

Lubrication system:

It consists of the engine lubrication system along with the lubrication oil pump.

Suspension system:

This will explain both the suspension systems at the front and the leaf spring suspension at the rear. One of the hydraulic arrangements of suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.

Braking system:

Braking mechanism is operational. The movement of the brake shoes on operating the pedals can be seen in the area where the brake drum is cut. The rear brakes cannot be demonstrated hydraulically but it is shown using hand braking system that is by using cables.

Stearing mechanism:

This can be seen and included in the steering handle, steering gear and coupling at the wheels.

The entire system will be mounted on its chassis.