We are a reliable manufacturer of single sided printed circuit board which are rugged, inexpensive, and can easily used. These being highly reliable, cost effective, faster and deliver peak performance. Other than its being user-friendly, these demand minimum maintenance.

Other than our single sided circuit board, we also manufacture double sided PCB. These are identified by their precision, stability and flexible handling. Other than its qualitative features, its cost effectiveness wittinesses a large demand in the industry.

We are a recognized name in manufacturing scrubbing machine. This is a single sided or double sided machine meant for deoxidizing, light debarring and finishing of printed circuit board. Our machine easily accepts all types of special brushes. Its brush changing is simpler and debarring or scrubbing is complete by high pressure water rinsing. Its water recirculating system is there and its total interior is made by PVC sheet and stainless steel. Each brush has independent drive and can be operated separately. Further its conveyor speed is variable from 0.25m to 1.5m/min. Following are some of its technical specifications:

Technical Specifications

Max. Board Width	450 mm
Brushes	0. D. 125 mm x 450 mm
Brush Revolutions	2100 rpm
Transport Speed	0.25 m/min to 5 m/min
Board Thickness	0.3 mm to 5 mm
Electrical Supply	Single / Three Phase
Floor space	1000 mm x 1200 mm L x 650 mm H
Gear motor	60 rpm. A. C. Universal
Warranty	1 year against any mechanical defects

The major function of dry film laminator is to machine is apply film to both sides of PCB by means of heat and pressure. Some of its technical specifications are :

Technical Specifications

Overall Dimensions	4 70mm x 600mm L x 600mm H
Weight Capacity	50 kg.
Heater Capacity	2000 W (Teflon Coats)
Max. Lamination Width	400 mm
Max. Panel Thickness	0.3 to 5 mm
Speed Range	0.25 m/min to 1.5 m/min
Electrical Supply	Single Phase 240 V. 16 Amp.
Temp . Indi. Controller	Digital 0 to 150°C
Warranty	1 year against any mechanical defects

Our conveyor type etching machines is suitable for chemical etching process for PCB. Machine is suitable for Chromic acid, Ferric, Alkaline solution etching. Our conveyor is work worm wheel type and its conveyor speed can be varied according to speed of etching solution. This efficiently helps in large scale production of PCB with no manual skill. Because of its simplicity in operation, any unskilled worker can operate the machine. Following are some of the technical specifications of our product:

Technical Specifications

Total fabrication of PVC	10 mm and 6 mm
Types of gears	Worm Gears and other gears of P.P.
Material	Motor shifts made out of Titanium material
Type of pump	Chemical pump polypropylene
Design	Special Nozzle design
Variable speed conveyor	0 to 60 RPM.
Gear motor A. C. universal	75 RPM.
Electrical supply	3 phase 15 Amp.
Warranty	1 year against any mechanical defects.

Our company is reliable name in manufacturing batch type etching machine which user friendly and demands minimum maintenance. Following are some of the technical specifications:

Technical Specifications

Total fabrication of PVC	6mm
Measurement	1/4 HP motor 1440 RPM
Total Chemical Capacity	40 Ltr.
Elect. Supply	240 V. 5 Amp.

Our photo printing machine is extensively used as an exposing machine for printing on printed circuits boards can be used for Photo Resist liquid and Dry film also. Following are some of the features of our machine:

• We can have exposing within 1 to 2 minutes.
• This is a double sized machine
• Ultra violet tubes aroused
• Control panel includes separate switches for upper and lower tubes
• Timer is there with vacuum meter and fan on

Technical Specifications

Max. frame exposing area	600 mm x 7 50 mm
U. V. Tubes	l000 watts each Total 2 nos.
Cooling	Air Exhaust
Cabinet Dimension	l00 mm x 180 mm
Warranty	1 year against any mechanical defects

Our chamber oven is used for PCB Baking process (Indent, Masking etc.). Its total fabrication of M.S. sheet thickness is 1.2 mm. Following are some features of our product:

Technical Specifications

Work Space	As per requirement
Digital Controller	0 to 400° C (PT-100)
Heating Capacity	As per requirement
Electrical Supply	240V 25 Amp. A.C.
Chamber Fan Capacity	1/4H.P.
Warranty:	1 year against any mechanical defects

Our plating tank is best suitable for Tin Plating, Copper Plating and Electrolysis. Following are some of the technical specifications of the client:

Technical Specifications

Material	P.P. (Polypropylene)
Thickness	8 mm, 10 mm
Size	As per required
Temperature Range	100° C
Warranty	1 year against any mechanical defects

We are a trusted name in manufacturing rectifiers which are simple in operation and demand minimum maintenance. Our machine is used for Tin Plating, Nickel Plating, Copper Plating & Gold Plating.

Technical Specifications

Total Fabrication	M.S. Sheet (1.2 mm)
Input load	5 Amp. 240 Volt.
Output	0 to 50 Amps. (variable)
Size	600mmL x 450mm W x 600mmH
Warranty	1 year against any mechanical defect

Our company is a recognized manufacturer of roller tinning machine. Our machine is used for tin application on P.C.B. with help of solder Flux. The machine gear is done with aluminum material and tank of stainless steel. Its heater is inserted in stainless steel pipe and it has good insulation and controller for temperature. Further, its upper roller is non drive made of special rubber and its lower roller is controlled drive having R.P.M. 20. Further it encompasses the following technical specifications:

Technical Specifications

Maximum Bord Size	325 mm
Maximum Board Thickness	0 to 5 mm
Electrical Supply	Single Phase 240 V. 20 Amps.
Floor Space	6000 mm Lx30 mm Wx 200 mm H.
Warranty	1 year against any mechanical defects.