We offer a wide range of gate valves, ball valves, Y-type strainers, steam line valves, global valves, safety valves, butterfly valves, IBR valves, Y-type actuator valves and others.

Investment Casting S.S. Ball Valves:
Our collection of Investment casting S.S. Ball valves are precisely made by using high quality raw materials and we offer these in cost effective range.
Special Features:

• Slotted PTFE seats
• Zero leak gland
• Gland type three piece design
• Effortless operation
• DOWN stem sealing & floating ball
• Quarter turn shut off
• Hard chrome ball
• Special PTFE gland seals
• Can be fitted with actuators
• Temperature -20°c to +210°c

ISO Pneumatic Actuator With Ball Valve:
We offer superior quality as per ISO grade standard Pneumatic Actuators with ball valves. These are specially designed as per the customized requirements of the customers.

Specifications:

• Size Range: ½” to 4”
• Actuator: Single acting/ double acting
• Design: ISO 5211/ DIN 3337
• Ends: Screwed/ flanged
• MOC: CF8, CF8M cast steel/cast iron/polypropylene
• Ball valve: 3 piece design

ISO Pneumatic Rotary Actuator With Butterfly Valve:
We have the requisite capabilities to develop, design and offer high standard cost effective range of Pneumatic Rotary Actuator with butterfly valves. These are vary durable and efficient in their performance.

Specifications:

• Butterfly Valve: Cast iron sure seal design/stainless steel
• Design: ISO 5211/ DIN 3337
• Actuator: Single acting/double acting
• Size Range: 1.1/2” to 10”

In our inventory, there is a wide range of different types of solenoid valves are present. These are diaphragm opted valves, single and double solenoid valves, push button operated valves, quick exhaust valves, foot operated valves, needle valves, flow control valves, solenoid coil & coil assemblies, brass & aluminum air blow gun, sintered bronze & aluminum silencers and others.

Direct Acting Solenoid Valves:

• Type: Normally closed and open and either 1 way or 2 ways.
• Sizes: M 10 x 1.0, 1/8” BSP 7 ¼” BSP and M 14 x 1.5
• Pressure: 0 to 12 kg / cm²
• Media: Water, air & non-corrosive liquid and gases
• Body Material: Powder coated aluminum body, stainless steel and brass against specific orders.

Hand Lever and Push Pull Valves

• Types: Can be available in 2 position and 3 position (PRN, PHN, RAN)
• Sizes: ¾”BSP, ¼”BSP, ½” BSP.
• Media: Air-filtered & lubricated.
• Pressure: 0 to 10- kg/cm³.
  
• Body: Powder coated aluminum body
• Actuator: Push pull and push lever.
• Other Models: Roller valve, foot pedal valve, pilot valve, disc rotary valve.

We are the leading suppliers of superior range of Pneumatic Valves and fittings. These are extensively used in various industry applications. Additionally, we offer them in cost effective price with multiple customized features. Precious grade of raw materials are used in their production process under strigent quality control process. Therefore, these become flawless and give hassle free performance during their operation.

Inbuilt Accessories

• Air Blow Gun
• One touch push in fittings
• Mini Ball Valves for pneumatics
• Quick release Couplings
• Disc Rotary Valves
• Pneumatic P.U. Hoses
• Non return valves
• Bronze Silencer
• Roller Lever valves
• Disc Rotary Valves
• Flow control valves
• Swing Check valves

We offer premium quality stainless steel pipes and fittings, which are manufactured as per the international specifications. These have beaded outlets that can be up to 50mm sizes and their banded outlets are over 50mm. These dimensional features provide additional strength to these pipes and fittings.

These are available with screw fittings with taper female and male threads and these process is now widely acknowledge throughout the entire globe. This process has been approved as the best satisfactory means of pipe installation. Each of the pipe is individually undergone through pressure testing method up to 700 kPa air beneath water. The gas, oil or steam working pressure of these pipes can go up to 1000kPa while their water working pressure can go up to 1500 kPa.

We offer a wide range of premium quality pressure gauzes, which are extremely durable, high performance and have compact designs. Our pressure gauzes can be availed in a wide range including hydraulic, form, air form, vacuum form, and MMWC gauzes. These are available in the market under various brand names including H.Guru, Waaree, K.I., Mass and others.

The various types of pressure gauzes available in our assortment are:

• Differential Pressure gauges
• Inductive Magnetic Contact gauges
• Stainless steel pressure gauges
• Commercial pressure gauges
• Diaphragm & Sealed Diaphragm gauges
• Utility pressure gauges
• All Stainless Steel pressure gauges
• Stainless Steel pressure gauge with PP Case
• Differential pressure gauge with double diaphragms
• Steel case High pressure SS gauge diaphragm type

Special Features:
All these are made up of high quality stainless steel case & measuring system.

• These are offered with socket & case welded form.
• These have filled either liquid or can be availed in dry form.
• Their accuracy is up to 0.5%.
• These have movable point & fixed pointer.
• These are manufactured as per the general standards of ASME B40.1 FOR NS 125 MM/ANSI.

Technical Specification :
We offer these pressure gauzes with varied technical features. Some of these technical features are unique and have made them highly popular in the industry. These technical features are:

• Standard version: 100mm, 125mm, 150mm
• Accuracy: ±1.0% of F.S.
• Ambient temperature: - 25°C to + 65°C
• Process temperature: Max 300°C
• Operating pressure: 75% of the Scale Value
• Over pressure limit: 30% for the pressure ranges up to 600 kg / cm2 & 15% for the pressure ranges more than 600 kg / cm²

Differential Pressure Transmitters:
We offer low cost range of differential pressure transmitters, which are extensively durable, efficient and can be availed in varied customized designs and sizes. These have high demand in varied industry applications.

Technical Specifications:

• These have Digital PROFIBUS PA Signal
• The outputs of these transmitters vary from 4-20mA / 0 to 20mA/0 to 5mA & HART.
• These are certified by ATEX for Intrinsic safety
• Their pressure directive confirming to 97/23/EC
• Radical or linear conversion selectable.
• Static pressure overload up to 320 bar
• Their accuracy level goes up to 0.075%
• Applications to measure flow, level, and pressure of Liquids & Gases
• Medium temp. is up to 120 deg C.
• Low Cost models with DIN connector
• Various Process connection
• Their housing is made up of Aluminum
• Sensor Settings with HART Configurable with APLISENS/E+H hand held configuration.

Pressure Transmitters:
We offer standardized and customized range of Pressure transmitters, which are availed in cost effective range. High grade of materials are used to manufacture these and they have high technical specifications. These are:

• Usually used for Static/Dynamic and Automotive Applications.
• Pressure range can vary up to 1000 bars
• Their outputs vary from 4-20mA/0 to 10 VDC & HART in smart units.
• Available in smart and normal.
• Their normal transmitters are factory set and have smart versions scalable.
• Static pressure overload up to 2 times the rated pressure.
• Their accuracy level is 0.5 % to as good as 0.1%.
• These are used to measure pressure of gases and liquids.
• Medium temperature varies up to 120 degree C.
• All the models have DIN connector.

We have emerged as one of the leading suppliers of high quality, cost effective & high performance pressure switches. The entire collection of these switches are:

Diaphragm Type: These switches have sealed pistons actuated that provide greater repeatability that falls within the range of +/-0.5%& +/_1% FSR. The 1 or 2 SPDT, DPDT micro switches of our collection are available with gold contact, silver contact and there are compactly hermetically sealed. These are offered across all the other ranges and they contain adjustable or fixed dead band made of sensor materials. These exhibit excellent compatibility with the most corrosive medias. To make them more durable, we offer these with explosion proof and water proof enclosures.

The entire collection of our pressure switches are offered in as low as 0.5mbar and up to 25 kg/cm2. Therefore, these are well suited in varied industrial applications.

Technical Specifications:

• Enclosure: These are enclosed with explosion proof to gas group II A,B&C as per IS 2148 and water proof to IP66 as per IS 13947.
• Material: Port enclosure-S.S.316 quality, Diaphragm pressure.
• Measuring principle: The piston is sealed by diaphragm that actuates up to the range of 100-600 bar
• Process connection: 1/4 NPTF standard and others.
• Conduit Entry: DIN Connector of SPDT PG 13.5mm standard or 2 SPDT standard.
• Dead band: Fixed up to 2% to 5%,7.5% of FSR and adjustable up to 15% max-for 1 SPDT.
• Repeatability: +/-1% of FSR as standard.
• Scale Provided: The accuracy level of the scale is up to +/- 3% of FSR.

Magnetic Float Level Switches: Top mounted (All SS):
We offer premium range of high performance magnetic float level switches (all SS category), which are made up of superior grade stainless steel. Some of the special features of these switches are:

• Economical
• Versatile and sturdy
• Easy installation
• Rugged construction
• Applied in multiple applications

Application Areas:

• Coolant Tank
• Oil Reservoir
• Chemical Processing System
• Sterilizing Equipment
• Pump Control

Technical Specifications:

• Switch: SPST(Reed Switch)
• Housing Material Die-Cast Aluminum
• Ingress Protection IP - 65
• Max Operating Pressure 10 bar
• Max Operating Temperature 100°C
• Minimum Specific Gravity 0.8
• Electrical Connection: ½” BSP(F).
• Switch Differential: 10 mm
• Length of Probe 0.2 to 2 meters
• Switch Rating: 1 Amp / 250 VAC

Miniature Level Switch: Side mounted (All SS)

We have become the leading manufacturers and suppliers of special grade miniature level switches with side mounted (all SS) category. These can be availed at the best industry price. Some special features of these switches are:

• Sturdy and Versatile
• Economical
• Require the least space
• Easy Installation

Their Applications:

• Processing Tank
• Coolant Tank
• Oil Reservoir
• Sterilizing Equipment

We offer multidimensional range of temperature controllers & digital indicators. Their proven quality, high level of durability and cost effectiveness have added extra features in their on-going demand curve.

Industry Applications:

To display temperature of multiple points in a process, these digital indicators are extensively used. These indicators have in-built programs indicator, which scan the temperature of each point and display it.

Constructional & Operational Specifications:

• Input power range is 230 V AC +/- 10 % 50 Hz.
• Input can be of RTD, thermocouple or transmitter.
• Number of channels or zones can be set as per customized requirements of the customers.
• Channels can be automatically selected through program.
• Selectable scan time.
• Brighter display of 1/2" LED type to indicate channel number.
• Load control is controllable through solid state relay or contractor.

We offer superior range of industrial thermometers, which have high resistance against high heat and temperature. In varied industrial operations, these thermometers are used to detect the temperature raise during their operational activities.
Some Special Features:

• Case Stainless Steel and Measuring system 1 every angle
• Dry or Liquid filled.
• Mounting Available
• EN 13190 standard structure
• The Expansion system is filled with inert gases

Applications of these Industrial Thermometers:

• Refinery
• Chemicals
• Power
• Fertilizer
• Petro Chemicals
• Food & Beverages
• Allied Process Industries
• Cement
• Pulp & Paper
• Sugar

Technical Specifications:

• Accuracy: ±1.0% OF F.S.
• Over pressure limit: 30 % of full scale range or 650°C whichever is minimum.
• Ambient temperature: -25 °C to 65 °C.
• Stem Diameter: 12mm.
• Operating pressure: 2 15 kg/cm.
• Case: AISI 304 Stainless Steel.
• Connection: AISI 316 SS.
• Stem: AISI 316 SS.
• Movement: AISI 304 SS.
• Pointer: Aluminum, black Colored Micrometer Zero adjustable

Great expertise is required to develop, design and manufacture a wide range of superior quality welding accessories and various safety equipments. We are the leading stockist of these equipments. These are used in various industries and day by day, these are experiencing accelerating demand in the market.

Welding Accessories:
Our fold of stocks contains high quality precious range of welding accessories. Each of the accessory has high durability and can work with higher perfection. Some constructional and operational specifications of these accessories are:

• Nitrogen, oxygen, carbon dioxide, hydrogen, single and double stage regulators.
• Welding Torch, Cutogen.
• Welding Machines.
• Welding Hoses and Cables.

Safety Accessories:
Our premium range of safety equipments are available in cost effective range and these have extensive industry demand. Some of the constructional specifications of these safety accessories are.

• Safety Helmets
• Safety Belts
• Gum Boots, Hunter Shoes

We have the adroitness to design and develop the superior range of engineering tools, which are used in various engineering applications. In almost all the industry, these tools have high demand and we offer them in the customized range. These tools are form RABRO and SAMRAT branded.

Design Specifications

• Angle plates are made up of cast iron
• Boring Bars
• Magnetic V Blocks
• Magnetic Chucks (circular and rectangular types)
• Revolving Centers and Dead Centers
• Tool Holders
• Adjustable Hand reamers
• Engineering Try Squares