Molsieve Nitrogen PSA (Pressure Swing Adsorption) Series provide a highly reliable onsite source of low-cost nitrogen for all purity applications. The wide portfolio of available product line models, coupled with standard options, allows us to configure the product in order to closely match your specific requirements. The wide range of flows, pressur

PSA Nitrogen Plants are equipment to produce continuous stream of nitrogen of required purity from atmospheric air at ambient temperatures. Such plants produce nitrogen by passing compressed air over a bed of Carbon Molecular Sieves. The nitrogen plants are manufactured in technical association and sub-license from Rutgers Carbotech Engineering GmbH, Germany. The Carbon Molecular Sieves are directly procured from them.

Features

• The nitrogen is produced from compressed air, by passing it over a bed of Carbon Molecular Sieves.
• Air Compressor accessory required.
• Oxygen Analyzer measures product nitrogen purity.
• Low capita costs and energy efficient system provides huge savings.
• Micro-processor control system allows unattended operation and maintains highest efficiency.
• Unique high-efficiency process eliminates the need for refrigeration dryer and increases reliability
• Economizer shuts down the system during low demand to increase savings. Product Attributes Flow Rate 0.1 to 2000 Nm3/hr Purity 97% to 99.9999% Pressure 5 Kg/cm2g (standard) At. Dew Point Up to (-) 95 Deg C

PSA & VSA Oxygen Plants: Molsieve Oxygen System PSA (Pressure Swing Adsorption) and VSA (Vacuum Swing Adsorption) Series an onsite source of low-cost oxygen for lower purity applications. Our Oxygen Plants / Oxygen generators allow you to have your own independent oxygen supply, ideal for remote locations. Not only do they remove the management costs associated with traditional oxygen supplies, but also provide a predictable and economic long-term oxygen cost.

The new range of Molsieve VSA generators will also help keep your costs under control and your productivity high. Molsieve Oxygen Generators use a patented high-efficiency molecular sieve to selectively recover oxygen from air. This high-performance sieve significantly reduces the energy necessary to generate oxygen, making Molsieve Oxygen VSA the low-cost oxygen source for many applications. The wide portfolio of available product line models, coupled with standard options, allows us to configure the product in order to closely match your specific requirements.

Features

• Applications experts aid in optimizing oxygen system sizing, selection, and gas utilization..
• Highly reliable, dedicated source of supply.
• Compact configuration minimizes space requirements. Cost-effective, continuous supply of oxygen.
• High-efficiency molecular sieve for low energy consumption. Micro-processor control system allows unattended operation and maintains highest efficiency.
• Modular design, enabling quick installation
• Proven design, ensuring reliable operation and minimal maintenance. Product Attributes Flow Rate 0.1 to 100 Nm3/hr Purity 91 /- 2% Pressure 3 Kg/cm2g (PSA) / 0.3 Kg/cm2g (VSA) Boosters available. At. Dew Point Up to (-) 50 Deg C

Molsieve further offers Hydrogen Plants based on Ammonia Dissociation. These equipment produce mixture of hydrogen and nitrogen and is widely used as pure hydrogen, either in mixture form or hydrogen after further purification. Our such hydrogen systems based on Ammonia Dissociation have been supplied duly approved by Engineers India Limited. Features » Equipment to produce on-site mixture of 75% Hydrogen and 25% Nitrogen by Ammonia Dissocition.

• Options available are Electrically or LPG/CNG based Furnaces. Nitrogen being inert, the mixture is widely used as hydrogen gas. The dissociated ammonia is further purified with respect to uncracked ammonia and moisture by desiccant dryer.
• Atmospheric Dew Point of Dissociated Ammonia as low as (-) 95 Deg C.
• Uncracked ammonia in final product guaranteed to be zero PPM. High cost effectiveness achieved with respect to traditional modes of hydrogen production. Product Attributes Flow Rate 1 to 500 Nm3/hr Purity H2 75%;N2 25% Pressure 0.5 to 15 Kg/cm2g At. Dew Point Up to (-) 95 Deg C

Molsieve specializes in providing drying solutions and has engineered its dryers which achieve on continuous basis atmospheric dew points to as low as (-) 95 deg C which corresponds to 0.04 PPM of moisture. All types of Dryers are offered with respect to removal of moisture either from Compressed air, or any Gas such as Hydrogen, Carbon Dioxide, and Carbon Monoxide. Our Gas Drying Systems included following features.

Features

• Packaged Equipment for Gas drying with respect to moisture. Drying Options available for, following gases:-

1. Hydrogen
2. Carbon dioxide
3. Carbon monoxide
4. Argon
5. Chlorine - All types of natural gases.

• Atmospheric Dew Point achieved as low as (-) 95 Deg C. Product Attributes Flow Rate 0.5 - 1000 Nm3/hr Pressure 0.5 - 300 Kg/cm2g At. Dew Point Up to (-) 95 Deg C

Molsieve offers Compressed Plant / Instrument Air Systems, with a complete Turnkey Packaged Solution for all Industrial Plant / Dry Air requirements. The package generally consists of Air Compressor, Filtration Systems, Desiccant Dryers, Piping and instrumentation, Pressure Reducing Stations; etc, so as to provide a one-stop for all industrial Plant/Instrument Air needs. Molsieve offers all types of Desiccant based Dryers, viz; Heatless; Internal Thermally Regenerated; Heat of Compression; and No Purge Loss Type.

Features

• Packaged Equipment for all compressed air requirements.
• Most efficient design to achieve low dew points with minimal purge.
• Various options of air compressors offered as per the application. Atmospheric Dew Point of compressed air achieved as low as (-) 95 Deg C.
• High Degree of Filters offered upto 0.01 Microns.
• Various types of dryer options available. Product Attributes Flow Rate 10 - 3000 CFM Pressure 100 - 60000 mm WC At. Dew Point Up to (-) 95 Deg C

Molsieve offers Low Pressure Air Dryers especially for Polyester Industries wherein huge quantities of air from a roots blower at a very low pressure is required to be dried to very low dew points. Such systems employ a series of equipment so as to provide a dying solution which is cost effective as well as efficient.

Features

• High Moisture content due to low pressure.
• High Flow Rates up to 2000 Nm3/hr.
• Moisture guaranteed to Atm Dew Point of (-) 80 deg C.
• Inlet Pressure from 100 mm WC to 10,000 mm WC.
• Generally used is a combination of, - Cyclonic Moisture Separator - Refrigerated Dryer - Externally Heated type Dryer Product Attributes Flow Rate 100 - 2500 Nm3/hr Pressure 100 - 10000 mm WC At. Dew Point Up to (-) 80 Deg C

Molsieve offers state-of-art Hydrogen Purification Systems, wherein commercial grade bottled hydrogen is purified to Ultra High Purity Grade, with minimal capital and running investments. These Hydrogen Purifiers are best utilized wherein the hydrogen bottled gas in high purity form are either not easily available or is very costly. The impurities generally purified are oxygen and moisture.

Features

• Equipment for purification of commercial hydrogen.
• Hydrogen Purified to Oxygen Level of 1 PPM.
• Dew Point Achieved for Hydrogen is (-) 95 Deg C.
• Direct purification from hydrogen cylinders.
• Inlet Pressures from 0.5 to 300 Kg/cm2. Product Attributes Flow Rate 0.5 to 1000 Nm3/hr Pressure 0.5 To 300 Kg/cm2g At. Dew Point (-) 95 Deg C (up to)

Our multipurpose Gas Sampling System offers facilities to extract sample from any furnace or other devices, processing the purified sample for analysis with various parameters and to flue gases from any source.

Features

• Vacuum pump
• Filters
• Cooling Coils
• Flow Measuring Device
• Analytical instruments

Product attributes
Flue gases from furnaces for different parameters like percent or PPM level of Oxygen. Dew point, Hydrogen, Ammonia, CO2, CO, Sulphur, SPM, and other pollutants.

We offer user friendly Gas Analytical Instruments, that are used to analyze gases for various parameters. We offer you various schemes for such analyzers where these can be procured either singly or with our gas equipment or sampling systems. Though we do not manufacture these instruments, however, as an OEM, we procure the best of such systems of international repute brands with guarantee.

Features

• Vacuum pump
• Filters
• Cooling coils
• Flow measuring devices
• Analytical instruments

Product Attributes
We offer analytical facilities for percent or PPM Level of Oxygen, Dew point, Hydrogen, Ammonia, CO2, CO, Sulphur dioxide, Nitrous oxide, and other gases.

Industrial Gas Piping & Gas Manifolds : We offer you one destination solution for industrial gas piping, gas manifolds and pressure reducing stations on turnkey basis. Our team of skilled engineers have expertise in providing complete piping layout and undertaking & executing the contract, with best of efficiencies in flow rates and pressure drops.

Features We provide solutions for

• Gas piping
• Gas manifolds
• Pressure reducing stations
• Gas mixing panels
• Gas piping trains
• Other gas handling systems

Solutions are also offered for all types of gases, at any pressure, temperature and flow rates.

We have state-of-the-art workshop to manufacture all types and class of Pressure Vessels to store gases at ambient temperature. We have arrangements for authorized and approved agencies from Chief Controller of Explosives to conduct under stage-wise inspection of our manufacturing process. We further provide assistance and consultancy for installations of LPG, Ammonia, CNG, Propane, and other gases; as per authorized guidelines.

Features

• Pressure Vessels manufactured as per the following Code of Construction - ASME Sec VIII, Div I - PD 5500 - IS 2825
• Capacities offered from 50 to 500,000 Litres.
• Vessels offered for Propane, LPG, Ammonia, Hydrogen, Nitrogen, Oxygen, CO, CO2 and Air.

To further expand into other avenues of trading opportunity, Molsieve Designs has gone into strategic diversification in related and unrelated areas. In this endeavor, we have procured Oil Skimmers from Abanaki, USA. Oil skimmers are used for continuous removal of oil from any coolant, water or effluent mix. Our Oil skimmers are designed and engineered to filter even the lightest of oil with the help of an endless belt.

Features ·

• Belt Tpe Skimmer
• Various types of belts offered for special applications
• Can remove oil up to 10 PPm levels
• Various models available
• Capacities varies from 5 LPH to 800 LPH of oil removal.

Skimmers available for all capacities, types and grade of oils and the nature of effluent.