Torque Sensor

Item Code: MBT-99

during the life cycle of a screw closure, there are a number of factors where the the performance of the closure is influenced by a particular torque value:

filling / sealing storage & distribution first opening use, reseal and re-use

in addition to torque generally associated with screw closures (eg application and removal torque), closure development areas such as tamper-evident seals, or child resistance have increased the range of torque which need to be measured.

technical standards:

there are a number of international standards which specify equipment and test procedure for evaluting , closure torques and the ability of closures to retain torque e. G. Astm d3192, astm d3474, astm d2063,astm d3198.

monad has unrivalled experience in providing affordable solutions for torque measurement applications.

the range of products extend from simple manually operated instruments, through to sophisticated computer-controlled systems.

Item Code: MTC-505

MTC Series Digital Torque Meter is a Metrologic instrument designed special for various torque testing and measuring, which is ideal for detecting and calibrating various powers screw drivers and wrench with torque control, for the relative torsion torque testing and the torsion feature parts testing. Widely used in electric, light industry, machine manufacture, scientific research and so on.

Features:

• Peak hold function
• Catch and hold the peak value in the test.
• RS-232C output/printer inside
• RS-232C output, connect with printer, which can print 10 value data and the Max value,
• Min value, Average value, eligible value and incompetent value.

Item Code: MTS-58

MONAD`s Sprocket/Pulley Torque Sensor is a low-cost, accurate method to measure processing torques. Coupled to any belt or chain driven stub shaft and monitored by a closed electrical circuit, machinery speeds and material feed rates can be precisely controlled. Consequently, this automation can increase productivity and decrease power consumption.

Features:

• High torsional stiffness
• Insensitivity to belt/chain tension loads on torque readings*
• Elimination of torque error due to bearing losses in jack shaft
• assembly
• Measurements of torque “at the source”

Item Code: MRT-44

Product Specialization:

Rated Output: 2mV/V nom.

Safe Overload: 150% of R.O.

Zero balance: +1% of R.O.

Excitation(VDC or VAC): 10 Max.

Bridge Resistance: 350 ohm nom.

Non linearity: +0.25% of R.O.

Non repeability: +0.25% of R.O.

Temp. Shift Zero: +0.02% of R.O.

Temp. Shift Span: +0.02% of Load

Compensated Temp.: 15 to 70 C

Operating Temperature: -40 to 70 C

Item Code: MRT-05

The MONAD Torque Transducer with bellow couplings can be used in any mounting position (horizontal, vertical or oblique). With vertical or oblique operation, please ensure that additional masses are sufficiently supported.

• Contact less transmission of the measurement signal
• Measurement on rotating and stationary parts
• Cylindrical shaft ends for non play friction joints
• Integrated measuring system for speed and angle of rotation
• Torque output signal: "10 V

Item Code: SRT-24

These sensors are primarily used to measure the output torque of clutch type nut runners in production fastening operations . Units equipped with incremental encoders are available for applications where fastener’s angle of rotation as well as torque data are required.

These sensors are used to monitor operation of systems using the following fastening strategies:

Turn of the nut - Tension control

Yield control - Torque rate

Features:

• Adaptable for portable usage
• No special adapter tools required
• Precision repeatable torque measurements
• Calibration reference for “hard usage” mechanical torque wrenches