Moonlight Alloys Private Limited / Naman Alloys Private Limited

We offer a premium quality of Aluminum Bar that are best suitable for diverse industrial usage. We as a trusted industrial raw material manufacturer offer variety of ferro aluminum alloys in different standards / grades / temper & sizes. Apart from standard range, we can manufacture alloys are per client's need.

Aluminum Bar we offer is available in in different specifics like:

Grades : 6063,6351,6101,3003,6082,2014

Temper MM

      * T4511, T3511, T4, T3
      * T4, T3 301-350 251-300
      * T4, T3 351-380 301-320
      * T6 151-300
      * T6 301-380
      * T6 381-400
      * T6 401-450
      * T6 151-300
      * T6 301-350
      * T6 351-400

Sizes : WIDTH X THK Length max

      * 10-250x20-400 2500
      * 10-300x20-400 2000
      * 10-50x20-310 6000
      * 10-150x20-400 3650
      * 10-250x20-400 3000
      * 10-50x20-310 6000
      * 10-150x20-400 3650
      * 10-50x20-310 6000
      * 10-150x20-400 3650
      * 10-250x20-400 3650

       

Ferro Aluminium metal casting as Stars, Notched Bars, Ingots are usually thrown to the molten steel bath for the purpose of de – oxidation. Aluminium instantly melts and reacts with dissolved oxygen to produce insoluble aluminium oxide and floats up the surface of the molyen steel bath making the bath oxygen free, but partly.

Actually, the use of aluminium alone has shown many problems of proper degassing of the whole liquid mass top to bottom. Because aluminium is very lighter compared to liquid iron, it can not sink (settle) in deeper regions of the molten steel bath in the ladle. So these deeper regions do not get properly gassed off oxygen and hence the improperly deoxydised steel rather unusable for may purposes.

This problem is usually overcome by alloying aluminium with Iron which makes much heavier enough to sink to the deepest region of the molten steel bath in the ladle, thus degassing the whole mass of the bath perfectly and properly. This alloy of iron & alumnium is ferro aluminium.

• Aluminium : Al.: 30-35 / 35-40 % Min.


• Carbon : C.: 0.1%


• Silicon :Si.: 0.5% Max.


• Size : 60mm x 60mm x 30mm

We
have for our clients our range of ferro manganese manufactured by the
alumino thermic process. These products can be supplied in bulk
amount depending upon the clients ' requirements. We also assure them
of timely delivery of the consignments. The varied usage of ferro
manganese includes:

• Manufacturing
  of Tool Steel ( up to 0.4% Mn.) & Structural Steels (upto 0.6%
  Mn.)


• Manufacture
  of 18-8 Austenitic Non Magnetic Stainless Steel.

Manganese
has high affinity towards combining with sulphur present in steel
producing manganese sulphide(MnS) which again floats up the metal
surface.

We
manufacture and offer ferro molybdenum that is an alloying addition
which sharply raises the mechanical and physical properties of
steels. Addition of molybdenum ensures uniform micro-crystalline
structure in steel, augments its hardening ability and eliminates
post-temper brittleness.

Structural
Steels with 0.15 – 0.50 % Mo. possesses greater impact strength and
this is especially valuable for manufacture of such details as automobile shafts, gears, rolls etc. Molybdenum is widely used is the
manufacture of high speed steels which are used for various cutting
instruments like drill pits, milling cutters, cutting tools etc –
capable of withstanding high cutting speeds. The other usage includes
manufacturing of heat – resistant & acid resistant, stainless
steels & cryogenic steels.

The
specifications include:

• Molybdenum
  : Mn. : 60-65%


• Carbon
  : C. : 0.1% Max


• Silicon
  : Si. : 2% Max.


• Sulphur
  : S. : 0.05% Max


• Phosphorus
  : P. : 0.05% Max


• Size
  : 10 MM – 100 MM

We
manufacture and offer ferro titanium that is used in varied
industrial applications. Titanium metal has a high affinity towards
oxygen though lower in order than aluminium and zirconium. But along
with de oxidation, it has another unique advantage like affinity
towards the dissolved nitrogen gas in the molten steel and produces a
compound like titanium nitride (TiN) which again floats up the
surface of the bath liquid. The dissolved nitrogen is removed by the
use of titanium as ferro titanium.=

These
ferro titanium alloys are used as de oxidizer, de nitrogenator and
alloying element. It combines quickly with carbon & prevents
formation of chromium carbide (detrimental) in the manufacture of
stainless steel and heat resistant steel to improve its welding
qualities and corrosion resistance.

The
specifications include:

• Titanium    :
  Ti. : 30-35% / 35-40% 


• Carbon
  : C.: 0.1% Max.


• Silicon
  : Si. : 2-3% / 5% Max


• Aluminium
  : Al. : 6-8 % Max.


• Sulphur
  : S. : 0.05% Max.


• Phosphorus
  : P. : 0.05% Max.


• Size
  : 10 – 100 MM / -60 BSS.

Because of its ability to increase the Strength and Plastic Properties of Steel as well as to raise the latter???s resistance to attrition and impacts ??? Vanadium is widely used in the production of various Structural, Tools, & Spinning Steels. As a rule, Vanadium is introduced in combination with Chromium, Nickel, Molybdenum, Tungsten &  other Alloying elements. It has an use in Defence Production in making Armour Plates used in Tanks. Vanadium is used in High Speed Steels, Hot Extrusion Tools & Die-Steels & as a Grain Refiner.

This high carbon ferro manganese are
known for their superior quality and high affinity towards combining
with sulphur present in streel producing manganese sulphide (MnS).
The different usage of our high carbon ferro manganese includes:

• Manufacture
  of tool steel ( up to 0.4% Mn.) & structural steels (upto 0.6%
  Mn.)


• As
  a de – oxidizer, these are used widely in the manufacture of 18-8
  austenitic non magnetic stainless steel.

Produced
by the alumino thermic process, the low carbon ferro manganese that
we offer are known for their superior quality. These alloys are
widely used in the manufacture of tool steel ( up to 0.4% Mn.) &
structural steels (upto 0.6% Mn.). Having high affinity towards
combining with sulphur present in steel producing Manganese
Sulphide(MnS) which again floats up the metal surface, these products
are used as de-oxidizer and hence find their usage in manufacture of
18-8 Austenitic non magnetic stainless steel.

The
specifications include:

• Manganese
  : Mn. : 70-75% / 80-85%


• Carbon
  : C. : 0.1%/ 0.5/ 1 % Max


• Silicon
  : Si. : 2-3% / 5% Max


• Aluminium
  : Al. : 0.7% Max.


• Sulphur
  : S. : 0.05% Max.


• Phosphorus
  : P. : 0.05% Max.


• Size
  : 10 – 100 MM / -60 BSS

Ask
us for the detailed specifications.

We
manufacture and offer manganous oxide (MNO) that is a colorant using
in bodies and glazes, producing blacks, browns, and purples. Offered
in different grades, these oxides find their usage in varied
industrial applications.

• MnO : 70% 75%
  77.5% 80% 84%


• Mn : 54%
  58% 60% 62% 65%


• Fe : 8%
  6% 6% 5% 5%


• SiO2 : 6%
  4% 3.5% 3.5% 3%


• Size : 0-10 MM or -100 BSS

(Apart
from the above specifications we can supply above products as
per the requirements of actual users)

Medium Carbon Ferro Manganese is widely used in the manufacture of tool Steel ( up to
0.4% Mn.) & structural steels (upto 0.6% Mn.). These medium
carbon ferro manganese have high affinity towards combining with
sulphur. Used as a de-oxidizer, these medium carbon ferro manganese
find their usage in 18-8 Austenitic non magnetic stainless steel.

The
specifications include:

• Manganese
  : Mn. : 70-75% /75-80 %


• Carbon
  : C. : 1.5% Max.


• Silicon
  : Si. : 2 %. Max


• Aluminium
  : Al. : 0.5% Max.


• Sulphur
  : S. : 0.05% Max.


• Phosphorus
  : P. : 0.05% Max.


• Size
  : 10 – 100 MM / -60 BSS.

We trade best quality Silico Manganese &  Ferro Silicon of reputed manufactures only it is used in manufacturing of steel & foundries, these products are also used in making other ferro alloys and in the production of silicon, these are high-temperature resistant & corrosion resistant ferrous silicon alloys that are used in electro motors as well as transformer cores.