Kettle elements with ejection device offered by us are constructed with copper sheathed element, brazed to brass flange and fitted with nickel-plated automatic ejection device. These have applications for heating water in electric kettles, instrument sterilizer, distillation apparatus and others.

Specifications:

Watts	Voltage	Depth of Immersion	Width	Flange
1000	230	112	106mm	1-9/16" -BSW 16 TPI
1500	230	112	106mm
2000	230	114	109mm

Applications:

• Water baths
• Sterilizers
• Autoclaves
• Hospital equipments
• Hotel equipments
• Paraffin waxes
• Glue melting
• Health club equipment

WE ALSO MANUFACTURE THE CUSTOMISED PRODUCTS

We offer immersion heaters, it basically serves general purpose and has the basic features of explosion and moisture resistance .it is available in High, medium and low watt densities for various processes.

Type	Watts	Voltage	Depth of Immersion	Flange
CHUNI 1.00	1000	230	220mm	1-1/4” BSP
CHUNI 1.50	1500	230	230mm	1-1/4” BSP
CHUNI 2.00	2000	230	325MM	1-1/4” BSP
CHUNI 3.00	3000	230	325MM	1-1/4” BSP

Construction:

• Sheath copper tube
• Flange
• Brass nickel-plated washers
• Check nut
• MS Cap

 
Applications:

• Water jackets apparatus
• Side arm Process circulating process, tanks

Type	Watts	Voltage	Depth of Immersion	Flange
IHCUNI 20/22	2000	230	220mm	1-1/4” BSP
IHCUNIS 20/22	2000	230	220mm	1-1/2” BSP
IHCUNI 30/28	3000	230	280mm	1-1/4” BSP
IHCUNI 30/22	3000	230/400(λ)	220mm	1-1/2” BSP
IHCUNI 40/26	4000	230/400(λ)	260mm	2” BSP
IHCUNI 50/32	5000	230/400(λ)	320mm	2” BSP
IHCUNI 60/38	6000	230/400(λ)	380mm	2” BSP

Construction:

• Sheath SS Tube
  
• Terminal Box
  
• Brass nickel-plated washers

Applications:

• Hot water tank
  
• Water jackets
  
• Process tanks
  
• Detergents
  
• Castic Solutions
  

For use in all Alkaline Solutions
Types	Watts	Volts	Heating Length		D.OI	Terminal Box
			Infective	Effective
AKCN 30/685 (Made out of S.S. Tube)	3000	230	305mm	380mm	685mm	176mm
For Bright Nickel, Dull Nickel and Chrome Solutions
SPCA 30/685 (Made out of Titanium Tube)	3000	230	305mm	380mm	685mm	176mm

Alkaline & Chemical Immersion Heating Element

The Alkaline Heaters offered by us are made in , S.S.-304& S.S.-316 for effectively heating alkaline cleaning solutions. Lead Heaters are covered with lead pipe for heating chrome & electroplating plating baths.

Features:

• Contain maximum sheath temperature with watt density

 
Lead Covered Heaters
Application :

• These heaters are designed for use in electro-plating baths,solutions whose solution attack steel sheathed heaters but which are non-corrosive to lead.
• Also suitable for nickel and copper plating bath application.

Mainly used in Sulphuric Acid pickling baths but no other acid.
Type	Watts	Volts	Heating Length		D.OI	Terminal Box
			Infective	Effective
PBCN 30/685	3000	230	305mm	380mm	685mm	176mm

WE ALSO MANUFACTURE THE CUSTOMISED PRODUCTS

The range of oil immersion heating elements offered by us are used for pure oil requirements. These are constructed using sheath steel tube, thermostant pocket, precision engineered flanges, cap and other components and are constructed to meet the requirements of Fuel oil heating, oil jacketted vessels and others.

Construction

• Steel Sheathed Tube
  
• Chrome Nickel Steel sheathing is available for heating vegitable oil and other industrial applications.
  

Application

• For fuel oil heating, oil circulating, for systems which supply hot oil to plastic processes oil jacketted kettles and similar equipments.
  
• Specially designed not to carbonize oil.
  

Type	Watts	Voltage	Depth of Immersion	Flange
OHST 10/43.8	1000	230	438mm	2-1/2” BSP
OHST 15/43.8	1500	230	438mm	2-1/2” BSP
OHST 20/43.8	2000	230	438mm	2-1/2” BSP
OHST 30/43.8	3000	230/400 ( λ)	438mm	2-1/2” BSP
OHST 40/57.5	4000	230/400 ( λ)	575mm	2-1/2” BSP

The range of fin heaters offered by us come with and without brackets and is precision manufactured from superior grade stainless steel. Further, our process expertise also allow us to deliver these in exact power and configurations as per client’s specific requirements.
Construction
Made of Chrome Nickel Steel Tube fitted with 30mm dia. M.S. Fins-supplied with 2 adjustable brackets.
Application:

• Air duct
  
• Custom Built Heaters
• D Shape Carbridge Heaters
  
• Industrial process
  
• Heating of air blast for drying
  
• Heat treating, annealing and for localised uniform heating of areas
  

FINNED AIR HEATING ELEMENT : Made out of Chrome Nickel Steel Tube 30mm galvanized mild steel finnes
Type	Watts	Volts	Dimensions of U Tube Air Heater			Mounting
			Length	Breadth	Height
CNF 10	500	230	254MM	70mm	40mm	Two Adjustable Brackets
CNF 24	1000	230	610MM	70mm	40mm
CNSF 30	1000	230	762MM	70mm	40mm
CNF 30	1500	230	762MM	70mm	40mm
CNSF 39	1500	230	990MM	70mm	40mm
CNF 39	2000	230	990MM	70mm	40mm

The range of fin heaters offered by us come with and without brackets and is precision manufactured from superior grade stainless steel. Further, our process expertise also allow us to deliver these in exact power and configurations as per client’s specific requirements.
Construction
Made out of 8.2 mm chrome Nickle Steel tube supplied with 2 adjustable brackets . Maximum surface temperature 650 degree centigrade
Application:
For Efficient baking and curing of paints , enamel , lacquers, varnish, adheshive, etc. Also used for drying of metals, powders, sand paper, textiles etc. Specially suited to exposed and semiexposed areas ???

U TUBE AIR HEATING ELEMENTS : Made out of Chrome Nickel Steel Tube
Type	Watts	Volts	Dimensions of U Tube Air Heater			Mounting
			Length	Breadth	Height
CNT 10	500	230	254MM	55	40	Two Adjustable Brackets
CNT 24	1000	230	610MM	55	40
CNST 30	1000	230	762MM	55	40
CNT 30	1500	230	762MM	55	40
CNST 39	1500	230	990MM	55	40
CNT 39	2000	230	990MM	55	40

We manufacture Custom Built Heaters  with following features and usage.

Features

• Type : Vertical/ Horizontal Thermic fluid heaters for process heating applications
• Temperature : Units custom built for temperatures upto 400ºC and fluid flows as per process needs.
• Capacities : As required.
• Fuel : Suitable for operation in any fuel – Furnace Oil, LSHS, HPS, Bunker C, LDO, HSD, LPG, Natural Gas, Bio Gas… Tailor made units for special/ waste fuels
• Burners : Pressure jet or steam/ air atomized, Monobloc or dual bloc burners
• Efficiency : Back end and integral heat recovery systems for maximum efficiency
• Technical services : Single window for total system engineering

Usage And Application:

• Coal tar pitch distillation
• Naphthalene plant
• Refining
• Naphthalene distillation

D Shape Cartridge Haeter

• D shape cartrige heaters are used to heat the dies and moulds.
• We supply complete heating systems including electrical control panels.
• We supply duck heating units and air drying units with shell and vessels.

" WE ALSO MAKE CORUGATION MACHINE HEATERS " For 42",52",62" straight and oblique High Speed Machines.

WE ALSO MANUFACTURE THE CUSTOMISED PRODUCTS

The range of Open Coil Heaters offered by us are precision designed to offer greatest efficiency, highest reliability & most effective cost structure for meeting the requirements of heating air. Further as the circuits in open coil air heaters have direct contact with air to be heated, the heat exchange from circuit to the air is direct therby providing more efficiency than any other air heaters.

Features:

• No need for draining tanks to replace heater elements
  
• Low watt density making it ideal for viscous/ heat sensitive fluids
  
• High temperature capabilities up to 1400° F
  
• Custom designs including explosion resistant designs
  
• Stainless/ alloy heater wells specially for corrosive high temperature applications
  
• Long service life
  

Applications:

• Heat treatment furnaces
• Annealing furnaces
• Ovens and furnaces where high temperature are required
• Ceramic ,Glass,Steel and Electronic Industry

In addition, Open Coil Elements are also manufactured for furnaces, where temperatures upto 1100 C are required, Quotations for these elements can be sent on request after details like OD and ID of the coil, cold resistance, shape of the element, etc, are sent to us.

WE ALSO MANUFACTURE THE CUSTOMISED PRODUCTS

The range of infra red heater offered by us come with superior constructed to efficiently transfer energy from body having higher temperature to a body with lower temperature. With the transfer done through electromagnetic radiation, these infrared heaters feature efficient conversion ratio of 100%.

Usage :

These find usage in industrial manufacturing processes including:

• Binder Curing on non wowen fabrics
  
• Drying adhesives and surgical tapes,laminations of all types
  
• Expansion shrink fit of metal parts
  
• Glass and ceramic drying and sterlizing
  
• Glass bending and annealing
  
• Mirror coating curring
  
• Mold/core baking in foundry
  
• Paint baking
  
• Paper coating drying
  
• Paper drying
  
• Paper moisture profile correction
  
• Powder coat curing
  
• Preheating of metal parts
  
• Print ink drying
  
• Screen printing curing on textile, labels, gasket,metal sheets
  
• Varnish Curing on stators/rotors/stampings
  
• Water drying on washed metal/plastic parts
  

They are used where:

• High temperatures are required
  
• Fast responses/ temperature gradients are needed
  
• Products need to be heated in certain area in a targeted way
  

WE ALSO MANUFACTURE THE CUSTOMISED PRODUCTS

The range of alluminum casted heaters offered by us offer clients efficient means of heating & controlling equipment like extruders, compression molding platens, heat sealers, vacuum forming platens. These heaters also feature optimum heat cool capabilities, providing high accuracy temperature control of /- 2 degrees.

Features:

• High operating temperature
• Any size or shapes available
• Pressure casted ensure porosity free high density casting
• Precise & accurate control of temperature due to heat cool action
• High watt densities available

Applications:

• Plastics extrusion machinery
  
• Hot Melt-Glue Pots
  
• Blown Film Dies
  
• Textile Industry
  
• Hot Stamp and Die Heating
• Auto tyre and tube patch machine

  WE ALSO MANUFACTURE THE CUSTOMISED PRODUCTS

We manufacture which are made with high temperature bearing insulators. Elements in these heaters are exposed partially in air for better transmission of heat. Mostly used in ovens and tanks where draining is not possible to change the heaters.

TECHNICAL SPECIFICATIONS
WATT	VOLT
1000	230
1500	230
200	230
1000	230
1500	230
200	230

WE ALSO MANUFACTURE  THE CUSTOMISED PRODUCTS