 |
Motion Control Products
|
We offer an extensive range of table indexer, shaft indexer, rotary table indexer, parallel shaft indexer and motion control products. Our range is available in various shapes, sizes and models as per clients specifications. These are known for their excellent quality, dimensional accuracy and high efficiency across the globe. Our range comprises of:
|
|
 
 
|
Rotary Table Indexer
The RX series adopts the same mechanism as a RS/RF series but the large turret diameter is more suited for high number of stops indexing applications. The RX series is ideal for rotary dial applications with features including large output mounting surface & large centre thru-hole. - Centre distance – 80 to 200mm
- Number of stops – 2 to 36
- Index angle – 90º to 360º
- Accuracy +/– 30 Arc seconds
Ordering Code
| RX110-12-270L/W-3B
| RX
| Rotary table indexer
| 110
| Centre distance
| 12
| No. of stops
| 270
| Index angle
| L
| Cam handing
| W
| Mounting hole face
| 3
| Shaft projection
| B
| Mounting position
| 
|
 
Parallel Shaft Indexer
The RP series is the Parallel Shaft Indexer and Oscillator series comprising of conjugate disc cams with turret having yoke mounted cam followers. This series incorporates parallel input and output shafts and is most often used for low number of stops and conveyor applications. - Centre distance – 50 to 200mm
- Number of stops – 1, 2, 3, 4, 5, 6, & 8
- Index angle – 90º to 330º
- Accuracy +/– 30 Arc seconds
Ordering Code
| RP100-3-120/1.8-EF-6
| RP
| Parallet shaft indexer
| 100
| Centre distance
| 3
| No. of stops
| 120
| Index angle
| 1.8
| Input shaft projection
Output shaft projection
| EF
| Mounting hole face
| 6
| Mounting position
|
|
|
|
|
Globoidal Cam Indexer
These series of indexers are robust, versatile units suitable for a wide variety of applications and basically comprise of two elements, the globoidal cam and radially equispaced cam followers called Turret. Available as shaft output (RS) and flange output (RF) in many size to meet a wide variety of speed, load and space requirements. - Centre distance – 45 to 250mm
- Number of stops – 2 to 36
- Index angle – 90º to 360º
- Oscillation angle – 1º to 180º
- Accuracy +/– 30 Arc seconds
- Optional centre thru-hole in flange version
Ordering Code
| RS80-6-180R/UW-3B
| RS/RF
| Shaft type indexer / Flange type indexer
| 80
| Centre distance
| 6
| No. of stops
| 180
| Index angle
| R
| Cam handing
| UW
| Mounting hole face
| 3
| Shaft projection
| B
| Mounting position
|
|
Index Tables
We offer our clients a wide range of Index Table for Lamp Industries. We supply customized index tables for lamp making machines. These include machines for Washing, Flare making, Sealing, Stem making, Mounting, Basing and Aging. The features of this series include large number of stops, hardened and ground barrel cams and accurate positioning. Index tables with integrated drives can also be supplied on request.
|
|
|
|
Oscillators
Oscillators are cam operated mechanisms producing an oscillating rotary output motion from a constant rotary input motion. A standard oscillating cycle, produced by one revolution of the input shaft, consists of two output motion periods of opposite direction with or without dwell periods between them. Oscillators can be made for almost any combination of motion period, dwell period and output stroke.
|
Pick & Place Units
The PP (Pick & Place) series perform accurate part placement with indexing or oscillating rotary motions Both lift axis can be symmetrical or non symetrical for pick and place application. Rotary motions can typically cycle faster than linear handlers. The features of this series include high speed performance, high accuracy positioning and accurate timing (synchronized operation). Each timing motion can be customized to synchronize with supporting equipment, commonly used in packaging equipments.
|
|
|
|
Automatic Tool Changers
This Cam actuated automatic tool changer perform all movements necessary for the exchange of tools in a mechanically & fully synchronized manner. Amongst this is the removal of the tool from the magazine, the exchange of tools and reinsertion into the magazine. Being a complete mechanical unit, the expenditure on controls is limited to the switching on an off of the driving three-phase motor.
The changer can be installed vertically or horizontally. Customised Changing times can be attained
|
Pneumatic Clutch Brakes
The Clutch/Brake combination unit consists of an air actuated disc clutch & spring applied Disc Brake. Its compact design combined with its high thermal capacity & low air consumption makes it ideal for high speed, high cyclic, heavy-duty industrial applications. When cylinder is pressurized, the piston clamps the clutch disc to the hub which transmits the torque to the shaft. When cylinder exhausts, the springs moves the piston in the opposite direction clamping the brake disc & stopping the shaft. ADVANTAGES * High Thermal Capacity. * Stable Coefficient of friction * Low Air Consumption * Low Operating & Maintenance Cost. * Easy removal of worn out linings. APPLICATIONS * Power Presses * Press Brakes * Guillotines * Printing Machines * Wood Working Machines * And Many More
|
|
|
|
Rotary Unions
Rotary unions are employed in a wide range of industrial fields wherever water, steam, oil, coolant, lubricants or other media have to be conveyed into or through turning machine parts like rollers, shafts or spindles. We offer a wide range of rotary unions with applications ranging from a mere swivelling action to high speed spinning. In addition, we offer special solutions, customer specified variations and modular designs which enable us to provide users with the perfect solution for virtually any application.
|
|
Rotary Table Indexer
Parallel Shaft Indexer
Globoidal Cam Indexer
Index Tables
Oscillators
Pick & Place Units
Automatic Tool Changers
Pneumatic Clutch Brakes
Rotary Unions
|
Copyright © Motion Technique (India) Pvt. Ltd., All Rights Reserved (Terms of Use)