M.S. Industries

High vacuum diffusion pumps we offer, are the most common pumps, which use a high speed jet of vapor to exhaust out the gas molecules.

Working Principle :

• Principle of self fractionating is incorporated in each pump for optimum performance.

Specific Features :

• Ultimate vacuum achieved by the pump is 2x10-7 mbars.

• Pumps of different speed upto 50,000 ltrs/ sec are available

Type Of Pumps Offered :

• Conventional Diffusion pumps

• Integrated Pump Group

The range of high vacuum valves we offer are used to regulate and control the flow of different types of fluids found in industrial and research environment.

Diverse Range Offered :

• Gate valves

• Butterfly valves

• Right angle valves

• Bellow sealed valves

• Electro pneumatically operated gate valves

Effective Against Following :

• Steam

• Air

• Oil

• Gases

• Vapor

• Slurries

• Acids

• Water

Specifications

• Size - varies from 25mm. to 600mm. N.B.

• Body - special aluminum alloy or stainless steel

• Sealing - neoprene or viton

• Operation - Manual or Remote Electro-pneumatic

• Leak rate - < 1x10-9 mbar

• Pressure Range - 1x10-7 LS-1 to 1000 mbar

The range of precision engineered piston pumps we offer is a kind of displacement pump that as number of pistons in circular array within a cylinder block. These pumps can be used as a stand alone pump, a hydraulic motor or an automotive air conditioning compressor.

Availability :

• From 500 lpm (ltrs/min) to 10,000 lpm capacity

Specific Features :

• This pump operates on Rotary plunger principle .

• The eccentrically rotating cam is rigidly connected to the driving shaft and moves the piston along the inner wall of the pump chamber.

• Hollow inner space of the slide valve is permanently open to the suction port.

• The displaced air is sealed and swept away only to get compressed and expelled through the outlet valve.

We manufacture superior performance oriented vane pumps, which are a kind of positive displacement pumps and consist of vanes that are mounted to a rotor, which rotates inside a cavity.
Availability :

• From 30 lpm to 1000 lpm capacity.

Principle :

• These operate on the principle of rotating vanes.

• Vanes slide in a rotor with very high RPM and sweeps around the air that is captured through the inlet port, compress it and throw out to the exhaust valve.

Advantages :

• Every pump is equipped with gas ballast to prevent (up to a certain limit) condensation of pumped water vapor.

• Compact construction with directly couple flanged on motor.

• Reliability in continuous operation efficient pumping.

• Easy partial dismantling facility.

• "O"-ring sealed housing cover eliminate the danger of leakage even after frequent dismantling.

• In built in non-return lock prevent pump from running in the wrong direction .

• High pumping speeds even at low intake pressure.

• Capable of achieving an ultimate pressure up to a level of 2x10-4 mbar.