We fabricate flow indicators, which provide a quick, reliable and economical way to verify the flow of fluids through industrial process lines.

Specifications:

• Flow Indicator with Rotor and Self Cleaning Mechanism
• Glass Cylinder with Brass or SS Body
• 1/4" Through 1-1/2" NPT
• Mount in any orientation

We manufacture Ball Type Sight Flow Indicators with special liners to protect against erosion and corrosion. These indicators can be delivered within a stipulated time frame.

Our range of wheel type sight flow indicators provides consistent performance in extreme conditions. These products are properly packed before dispatching.


Applications
Ideal to prove flow of coolant, lubricants, fuel lines etc. on turbines, engines, compressors, and other large machinery. Great for monitoring filter efficiency, pump operation and flow direction.
 

 Technical Specifications
• Body Material : Brass / SS 316
• Sight Window : Polycarbonate Tube
• O-Ring : Silicon
• Rotor :  Delrin Plastic
• Max. Temperature : 212 F / 100 C
• Max. Pressure : 230 psig./~15bar
• Pressure Drop : 0.25 bar at max. flow 
 

Our flow minders measure and remember the highest restriction at maximum airflow. This range of flow minders is reasonably priced.

These flow indicators are reliable for low pressure applications. These flow indicators provide higher visibility to the fluid flow. It also offers very less pressure drop.
Technical Data
 
• Max. System Pressure: 10 Kg/cm
 
• Temperature Range: 8 to 80 C
 
• Indicating substance: Multi colour balls
 
• Available Port Sizes: 3/8”& 1/2” BSP
 
 

We fabricate indicating type flow switches that are designed for a wide range of oil and water flow applications. It has a “fault” indicator set-point that is adjustable.

We are offering miniature flow switches, which are available in different flow ranges. These switches can be supplied in a bulk quantity within a short time frame.

These flow switches are designed for positive detection of fluid flow through your equipment. FS series models provide adjustability over wide range. These are used in fluidlines carrying non-hazardous fluids like water, kerosene, very low viscosity lubricating oils, gas/air etc
Technical Data

• Scale Tolerance - ± 5% of full scale
• Max. System Pressure - 10 Kg/cm2
• Temperature Range - 8° to 80°C
• Sensor Specifications - Hermetically sealed reed switch
• Contact Rating* - 500 mA*/1A 230VAC 50 VA, 'NO' type contact
• Hysteresis - Depending on Switch value, minimum 0.5 l/min
• Available Port Sizes - ¼'' x 3/8'', ½'', ¾'', 1'' BSP

We manufacture paddle type flow switches, which are simple as well as economical. These switches are really helpful for controlling flow rates in pipes.

We manufacture pneumatic proximity sensor, which provides effective control of application processes by detecting product placement over sensing distances.

Functions

• A pointer moving over a colour coded scale indiacates cooant flow.
  
• Adjustment is provided for setting at any flow rate up to 20 GPM. The pointer shows this settings and variations in a flow as they occur during operation.
  
• The setting may be made so that the electrical switches will activate at points representing up to 40% under or over flow rates.
  
• Easy Installation
  
• Install directly in your coolant supply line. Easy to follow instruction included mounted onto a solenoid value available on request.
  

Design Features

• Reed type hermatically sealed switches.
  
• Oil tight compartment and terminal box.
  May be installed in any position without adverse effect on operation.
  
• Colour coded scale with marked switch point
  
• All ports have ½” BSP internal threads.
  
• Electrical connection is through 3/8”cable gland.
  
• Compact, only 10 cms.(W) x 15 cms. (H) x 20 cms.(D).
  
• Maximum operating pressure 2000PSIg.
  
• Switch rating (max) 230 V, 50 Hz, 100 mA.
  
• Toggle switch included to bypass electrical.
  

Specification

• Fluid - Oil 68 SSU aprox
  
• Fluid flow rat - Settable up to 20 GPM
  
• Max system working pressure – 2000 PSI g.
  
• Electrical rating – 115 V, 50/60 Hz, 100mA
  
• Inlet ports and outlet ports – Two ports each with ½” BSP internal threads.
  
• Max Weight – 3.1 Kilograms.
   
  

Our proximity switches offer you the best prerequisites for recording, counting, measuring or positioning. We can deliver them in bulk quantity within a short time frame.

We offer Paddle Flow Indicator can be installed in any orientation and the body can be rotated 360° while in service to allow maximum visibility.

Paddle Flow Indicator Special Features:

• Clearly Visible Flow Indication
• Four Material Combinations Available
• Low Minimum Required Flow
• Rotatable Body for Easy Viewing
• Usable with a Wide Variety of Liquid Media