Pharma Equipment & Machinery

“DIVYA” colloid mill is suitable
for homogenizing emulsifying dispersing, mixing, comminuting of liquids to
highly viscous products. It is based on rotor – stator principle, It is
available in plain as well as water jacketed in both STD & GMP
models.

Operations:
Product is feed to the operating area
of a rotor, having a speed of 3000 R.P.M by specially designed feed device. The
product is processed by high sheer, pressure and friction between the stator and
rotor, the angular gap becomes narrower towards the discharges section. This
processed product continuously leaves the mill through the drain pipe, if
required, it can be re-circulated.

Salient Features:
All
contact parts are made out of S.S. 304 (S.S. 316 on demand at extra cost). No
castings are used to avoid contamination problems.
Coupling provided between
motor shaft and rotor shaft for ease in maintenance.

Three leak proof
neoprene sealing device between the motor and the processing chamber to prevent
liquid going in the motor winding.
Modified design of semi concave teeth in
rotor and stator reduces motor h.p. and gives better performance in size
reduction without damaging the products.
Extended bearing housing specially
designed to facilitate fine metal contact of rotor and stator. This unique
design provides smooth and consistence all around performance and long life of
rotor and stator.

• Three way cock system for draining and recirculation of the
  liquids provided as standard. Extra discharge sprout provided as a standard for
  viscous products.


• DOL starter with overload relay for protection against
  single phasing and low voltage.


• Contact parts can be easily dismantled for
  cleaning.


• Special design facilitates adjustments of the grinding gap by
  exterior screw by means of handle even during operation.


• Flame proof motor
  and Flame Proof rotary switch can be provided on request at extra cost.

Double cone blender is a machine with higher degree of efficiency. It is used for mixing dry powder and granules homogeneously.

Features &
Highlights:

• Ideal for mixing of powders and homogeneous lubrication of granules.


• Moc S.S. 304/316/ 316L


• Steam/Electric heating options available


• Safty guards provided with limit switch interlocked to motor for higher


• capacity model


• Available Capacities 5 kgs to 1000 kgs.


• Automatic loading & unloading facilities provided.

We provide a supreme quality
range of dust conditioners that finds applications in pug mills. Dust extractor 150 cfm / 300cfm.

• Suction Capacity 150 CFM ( 250M³ / HOUR ) AT 70 mm W.G.


• Filteration Area 9SQ.FT. ( 0.8M² )


• Dust Storage Capacity (Ltrs ) 25


• Inlet Connections 4 NOS OF DIA 1.5"(38.1mm) 1NO. OF SIA 62mm


• Electricals Motor 1 H.P. / 2800RPM / 440V / 3PH


• Machine Dimension 28"X19"X32"HT

We offers fluid bed system which begins with a simple drying
unit to which several different optional packages may be added for
conversion to a granulation or coater.

Features:

• Very versatile process equipment.
  


• Capacity available from 2.5 Kgs. to 500 kgs. batch size
  


• Times, Space, Energy & Labour saver
  


• Electrically & steam operated available
  


• MOC SS 304 / 316 / 316L.
  


• Flame proof model available
  


• PLC options available
  


• cGMP with documentation.

Operation:
Multi mill is designed to utilize the principle of variable force of swing beaters
having both knife and impact edges, rotating within a selected screen to control
the particle reduction. Material fed into the processing chamber moves to the
periphery and passes through the screen radially and tangentially. Finally the
processed material gets collected into the container kept below the processing
chamber.

Drive mechanism consisting of 3 HP. 440VAC, 3 Ph, 50 c/s, 1440
rpm TEFC electric drive motor. Drive through cone pulley mechanism giving speed
of 750/1500/2200/2800 rpm on no load. The above drive mechanism enclosed in a
M.S. housing with cover, S.S. rotor mechanism with proper bearing housing and
stuffing box. Rotor having 12 nos. knife / impact edges swinging type blades and
2 nos. scrapper blades, SS screen holding plate and one no. screen S.S.
dismantling hopper. Complete unit supported on M.S platform, portable type with
M.S. column. Unit complete with DOL starter, forward-reverse switch, drive
motor. All contact parts of SS304 and all M.S parts painted to a smooth finish,
for standard model, while in case of a GMP model all non contact parts shall be
of SS304 material or otherwise cladded with SS304 material.

Options
Available:

• GMP construction.


• SS316 construction.


• Flame
  Proof construction.

Recommended:
Extra sieve available in
sizes of 0.5mm to 12m m hole diameter.

We are catering a comprehensive range of octagonal blenders which suits the specific requirements of the clients.

Features & Highlights:

• Octagonal shaped with rectangular enter, conical discharge frustum
  and rectangular top frustum.


• Baffles provided in the shell.


• Charging and discharging is through a butterfly valve.


• A conical adaptor can be provided for fixing charging drum after butterfly
  valve.


• All moving parts are enclosed in guards.


• A safety railing with a limit switch is provided for operator safety.


• Manual inching arrangement can be provided.


• Flame-proof motors with flasme-proof push button stations can be provided.


• Model available from 25 kgs. to 1000 kgs.

We are catering a comprehensive range of fully automatic untouched oral liquid processor which suits the specific requirements of the clients.

Features &
Highlights:

• Capacity from 100 Ltrs. to 5000 Ltrs.


• MOC SS 316 / 316 L


• Steam / Electric heating options available.


• Stirrer / Homogenizer also available a bottom


• On request we manufature as per customer design


• CGMP with documentation.

RAPID MIXER GRANULATOR ( RMG
)

MIXING BOWL & COVER: -
SS304 bowl design in three
sections i.e. Flat Bottom, Cylindrical Mid Portion and Conical top portion for
efficient mixing operation and provided with counter balance lid. Lid provided
with vents, view ports and charging openings. SS316 Bowl can be provided as
options.

MAIN IMPELLER & DRIVE : -
The main impellor,
which is completed to a suitable size worm reduction gear box, through chain
coupling, consists of a dual speed (750/1500 Rpm) synchronous dual HP TEFC
motor, coupled through a belt drive to a worm reduction gear box. designed to
provide mixing at the bottom and at the center of the bowl and is driven through
a specially designed bearing housing that facilities inside wash facility for
quick change over and also prevents leakage of powder from bottom entry and
leads to longer life of gear box.

CHOPPER: -
The chopper
drive consists of dual HP dual speed (1400/2800 synchronous speed) TEFC motor.
The motor shaft is of SS and the chopper has specially designed 4 blade SS
impeller. The shaft is integral with the motor. The assembly mounted
horizontally into the bowl.

DISCHARGE PORT: -
The discharge
port is mounted horizontally into the bowl with vertical downward opening. The
opening is operated by pneumatic cylinder and discharged can be regulated for
required opening(OPTIONAL)

MOUNTING:
A sturdy M.S. frame is
used to house the drive assembly at the bottom. The bowl is mounted on the top.
A SS staircase and railings are provided for the platform. The platform is half
covered with SS dimpled plates, for safe movement of operator and the area under
the bowl is covered with SS. The entire body is covered form the sided by
suitable SS covers.

Construction:
Tray
Dryers will be of robust construction built on formed angles of 10 SWG sheet and
suitable reinforced with angles and sections. The dryers’ internal and external
wall are manufactured from 16 gauge thick mild steel sheets. The dryers will be
insulated with minimum 50mm thick glass wool insulation. The dryers will have a
fresh air inlet through filter and an adjustable air outlet with a door at the
front. The doors will be explosion proof and will be locked with the help of
spring loaded ball latches with suitable pressure.

Electrical
Heating:
Air inside the tray dryer will be heated by ‘U’ tube air
heaters each of 1000 watts. Maximum temperature attained inside the dryer will
be 100/200/300 degree centigrade and will be indicated by a dial thermometer
fitted on the dryer.

Air Circulation:
Air inside the dryer
will be circulated by one / two heavy duty axial flow fans fitted on shaft/s of
¾” / 1 ¼” Dia. and driven by 1 / 2 no/s. T.E.F.C. motors of suitable H.P. with
ISI mark through belt. The special design of the motor ensures uniform air
circulation, so that there is uniform air current over the entire charge loaded
inside the trolley, inside the dryer. We have 2 blowers of model DO-24 with a
capacity of 0.5H.P.

Trolley/Rack System:
Models DO-12,
DO-24, have a fixed rack system made out of mild steel angles. Model DO-48 will
have one trolley. Model DO-96 will have 2 trolleys and DO-192 will have 4
trolleys and so on.

Trays:
Trays will be manufactured
from 16 or 18 gauge aluminum sheets. Its dimensions are 32” X 16” X 1 ¼”. Trays
also available in SS304/SS316, PP and FRP.

Control
Panel:
Control panel will be fitted on the front of the dryer. It
comprises of starter with overload relay, contactor, push buttons, thermostat,
indicating lamps, connectors etc.

Vibro sifters or mechanical sifter is in wide demand in the market for separating solid particles from solids, liquids particles from solids.

Features:

• Size 20", 30", 36", 48" model avilable.
  


• Less power consumption then same size of conventional mechanical
  


• Sifter and considerable operational cost savings.
  


• Multi deck models available to grade the material in various sizes.
  


• Noiseless, maintenance free *high speed.
  


• Floor vibration is nil which keeps the machine steady.
  


• Easy dismantling and cleaning facility for contact parts.
  


• Output: 175 Kgs. to 400 Kgs./Hour (Depending your products)