Programmable Process Indicator

We are engaged as a renowned manufacturers and exporters of a wide range of Programmable Temperature Controller (Double Display) which are fabricated using quality raw material ensuring optimum output to our clients. Our range is known for its low consumption and easy installation and is available in varied specifications to meet the varied application requirements of our clients.

Technical Specifications

Model PTC-1201 PTC-2201 PTC-4201

Dimensions: (HXWXD) mm

• 96X96X75
• 72X72X120
• 48x48x100

• Power Supply: 90-270V AC/DC, SMPS 90 - 270V AC/ DC, SMPS
• Display: Upper: RED, 4-Digit, 0.56"
• Lower: GREEN, 4-Digit, 0.4"
• Upper: RED, 4-Digit, 0.4"
• Lower: GREEN, 4-Digit, 0.3"
• Resolution: 1C / 0.1 C (For Range Less than 400 C)
• Accuracy: ± 0.5% of FSD
• Input Thermocouple RTD: J (0 to 400 C) or K (0 to 1200 C) or R (0 to 1600 C)
• PT: -100 2W/3W (0 TO 400C) or 0.0 to199.9 C or -50.0 to 199 C - Factory Set
• Control Output Relay: SSR/BUZZER 230V AC, 5A (1C/O or 2C/O) 12V DC Approx
• Relay Action: HEAT MODE or COOL MODE (Factory Set)
• Control Action: Time Proportional (TP) Selectable, Auto tune PID
• Indication Display for Sensor Break and LED for Relay Status Indication
• Protection
• Relay turns OFF in case of Sensor Breaks
• Set Point 1: 2, 3, 4 Relays are available in Model MTC-1202, MTC-1203, MTC-1204, respectively 2, 3 Relays are available in Model MTC- 2202, MTC-2203 respectively

Our wide range of Digital Temperature Controllers is highly efficient in offering accurate measurement of temperature. These are fabricated using quality grade of raw material and are available in various specifications as per the client requirements. Our range is available in various sizes, heights and widths as per the client’s specifications.

Technical Specifications

MODEL MDC-1901 MDC-2901 MDC-3901H MDC-3901V DTC-49

Dimensions (HXWXD) mm

• 96X96X100
• 72X72X120
• 48X96X120
• 96X48X120
• 48X48X100

• Display: RED, 3½ DIGITS, 0.56" RED, 3½ DIGITS, 0.4"
• Control Action: ON/OFF or TIME
• PROPORTIONAL: (TP) (Factory Set)
• Input Thermocouple: J (0 to 400 ¿C) or K (0 to 1200 C) or R (0 to 1600 C) J (0 to 400 C) or K (0 to 1200 C) J (0 to 400 C or 0 to 199.9 ¿C) or K (0 to 1200 C)
• RTD PT: 100 2W/3W (0 to 400 ¿C or 0 to 199.9 C or -50.0 to 199.9 ¿C) PT100 2W/3W (0 to 400 C or 0 to 199.9 C) PT100 2W/3W (0 to 400 C or 0 to 199.9 C or -50.0 to 199.9 C)
• Control Output Relay:* 230V AC, 5A (1C/O or 2C/O)
• SSR: 24V DC ±2V
• BUZZER: 24V DC ±2V
• Resolution: 1 C (0.1 C for range less than 200 C)
• Accuracy: ±1% of FSD
• Relay Action: HEAT MODE or COOL MODE (Factory Set)
• Power Supply: 110/230V AC ± 20%, 50 Hz, 24V AC/ DC
• Indication LED to Indicate Relay Status & Sensor Break
• Protection Relay Turns off In Case of Sensor Break
• Installation: The RTD sensor should be connected to the instrument by cables of proper gauge to minimize errors due to cable resistance. For thermocouple sensor, compensating cable of proper type must be used.
• Cut Out: (Mm) 92 X 92 68 X 68 44 X 92 X 44 45 X 45
• Mounting Flush Panel Mounting with side clamps fixed behind the panel 2 Relays are available in Model MDC-
• 1902, MDC-1901AL, MDC-2902, MDC- 3902V, MDC-1922 & DTC-49C
• Relay Action: is H+C MODE, H+H MODE (Factory Set), 2nd Set Point relative to Main Set Point, setting by Screw Driver, in all Models except MDC-1922 where both Set Points are individually settable. Note: H=HEAT, C=COOL

We specialize in fabricating superior quality Digital Process Indicator (Fix Range) which is developed in conformity to industry standard as well as in accordance with client specific requirements. Our range is known for its rugged construction, durability, long service life and low maintenance

Technical Specifications

MODEL MDI-1101-P MDI-2101-P MDI- 3101-P PI-401

• Dimensions: (HXWXD) mm 96X96X100 72X72X85 48X96X120 48X48X100
• Display: RED, 3½ DIGITS, 0.56" RED, 4 DIGITS 0.4"
• Range: 3½ Digits (0-100 or 0-200 or 0- 1000 or 0-1500 or 0-199.9) (Factory Set) Correspond to Input
• INPUT Current: 0 - 20 ma, 4 - 20 ma
• Voltage: 0 -10V DC
• Power Supply: 110/230V AC ± 20%, 50 Hz, 24V AC/DC 90-270V AC/DC, SMPS Cut Out (mm) 92 X 92 68 X 68 44 X 92 45 X 45
• Mounting Flush Panel Mounting with side clamps fixed behind the panel

We are an ISO certified organization and manufacture superior quality 8 - Channel Scanners to our clients. Optimization of finest grade of materials makes these scanners highly durable. Our range is available in various dimensions, appearances and is also offered with a scanning facility as per the client’s requirements.

Technical Specifications

MODEL MS-5708

• Display 4 digit 0.56" seven segment LED display for process value.
• 2 digit 0.56" seven segment LED display for Channel number.
• 1 digit 0.56" seven segment LED display for Process Status.
• Input 4 to 20 mA, 0 to 10V DC, RTD (PT-
• 100 2W/3W) Or Thermocouple (J, K)
• Display Scan Time Adjustable from 2 to 99 sec
• Appearance & Dimensions 192 x 96 x 144 mm
• Panel Cutout 188 x 92 mm
• Case M.S. sheet metal case with ABS molded Front & Back
• Output 6 or 8 relays

Features

• Grouping of inputs is possible
• There can be maximum of 4 groups
• Temperature & Process Control
• Auto / Manual Channel Scanning Facility
• Optional Features RS-232 / 485 interface Available