Leveraging on sophisticated technology, we have developed our expertise in the designing of qualitative air compressor cripple. Our range is offered at industry leading prices. These effectevley compress air to meet the specific operation requirements.

DESIGN PARAMETER: 100% RH, Inlet Temp. 40 deg. C Operating Pr. 16 bar Max. However units for higher-pressure up to 150 bar can also be supplied.

WORKING PRINCIPLE: Regenerative Desiccant Compressed Air Dryers are an economical process to reduce the moisture content of the compressed air to achieve the dew point as low as minus 80 deg C. The dry Compressed Air ( at consistent ) dew point is continuously achieved by using Twin Towers packed with desiccant. While one tower is on-stream- drying the compressed air, passing small percentage of dry air is regenerating the other. The cycle is repeated at pre- set interval. DEW POINT: up to minus 80 deg. C While one tower is on-stream- drying the compressed air, passing small percentage of dry air is regenerating the other. The cycle is repeated at pre-set interval.
DEW POINT: - upto minus 80°C

FEATURES:

• Design of Drying Tower to ensure the proper channeling of compressed air through the desiccant bed.
• State of Art software based highly accurate sequence timer
• Reliable and easy maintainable change over valve.
• Low pressure drops
• Low noise during exhaust

REFRIGERATED AIR DRYERS: FULLY AUTOMATIC Reputed make (Imported) with unique features and state of art electronic control systems. A refrigerated air dryer is designed to utilize refrigeration components to physically lower the dew point temperature of compressed air. Available with either air- cooled or water- cooled condensing units. Refrigerated Air Dryers employ the liquid refrigerated-to-air cooling concept, for the most efficient approach to heat exchange. The Refrigerated Air Dryers use the "flooded evaporator" principle in the refrigerant-to-air heat exchange

We manufacture compressor spare parts for Kirloskar (K.G.Khosla), Ingersoll-Rand, and CP Compressors. The range of air compressor spare parts include the following:

• Piston Rods
• Piston Rings, Rider Rings, Rod
• Packing And Seals
• Compressor Piston
• Channel Valves
• Channel Valve Springs
• Wear Strips
• Valve Assemblies & Parts
• Seal Plates
• Valve Guards And Seals
• Metal Valve Guide

We are engaged in design and manufacture of Heat Exchangers, Condensers, Filters & oil coolers, to meet individual customers' requirements. Fabrication is done in accordance with ASME Code Section 8 Division 1.

SHELL and TUBE TYPE OIL COOLER AND HEAT EXCHANGERS

Heat Exchanger Facts: A heat exchanger is a device for transferring heat from one fluid to another, where a solid wall separates the fluids so that they never mix. They are widely used in refrigeration, air conditioning, space heating, power production, and chemical processing. One common example of a heat exchanger is the radiator in a car, in which the hot radiator fluid is cooled by the flow of air over the radiator surface.

General Description: Standard heat exchangers particularly made for heavy duty ever with medium pressure ranges. The composition can be made with different choice of materials, all sort of combinations make this type of exchangers versatile enough to solve any problem of fluids, flows, even with high duty rating.

Construction Base Type EM1 Tube Bundle: Normally we use straight copper tubes of extremely high efficiency. The tubes are rolled into the tube sheets, to give the most rugged construction even under vibration.

Baffles: Punched from steel plates, with supporting lips for higher thermal efficiency and more safety in case of vibration.

Shell & Tubesheets: Welded carbon steel construction, to give most rugged exchanger, adequate thickness for t trouble free long life. Shell side connections made also for customers requirement, over the standard threaded connections we propose flanges

Covers: Standard exchangers with carbon steel covers, in the 4 or 2 pass versions.
We also supply replacement heat exchangers & tube bundles for many brands, which include Atlas Copco, Kirloskar Pneumatic, Ingersoll-Rand. Our replacements meet &/or exceed the original OEM quality, specifications & performance.

These vacuum pumps are apt for Vacuum Forming, Paper Handling, Food Processing, Liquid transfer and several other such applications. We offer them at very moderate prices to our clients spread across the globe.

Model	Motor	No. of Cyl.	Piston Displacement	Vacuum (Hg) Pressure
	hp		cfm	inches	mm
V335	1.5	2	21.60	29.00	736.6
V35T	1.5	2	10.80	29.60	751.8
V334	2.0	2	34.60	29.00	736.6
V344T	2.0	2	17.30	29.60	753.1
V355	5.0	2	59.65	29.00	736.6
V355T	5.0	2	29.82	29.60	754.4
107V	7.5	2	110.00	29.00	736.8
107VT	7.5	2	55.00	29.65	753.1
15V	10.0	3	148.50	29.20	741.7
15VT	10.0	3	99.00	29.65	753.1

CAPACITY: Up to 20 cubic meters
DESIGN/ MANUFACTURING CODE: IS 2825, ASME section VIII, Division –1
Material of Construction: As per IS 2002 / SA516
ACCESSORIES: Pr. Gauge, Safety Valve, Auto/manual drain valve

We are engaged in design and manufacture of automatic drains.

Digital Automatic Drains

• Fully Automatic 
• Compact 
• Countdown Facility 
• Drain Time (1-10 seconds)
• Cycle Time (1-99 minutes) 
• Manual Drain
• Programming Protection

These automatic drain are very much in demand among our clients spread across the globe. With our expertise in the domain, we assure high quality of our product which can be availed from us at competitive rates.

We are a leading manufacturer of PSA Nitrogen & Oxygen Gas generators. We use sophisticated technology and advanced machine to manufacturer these. In addition we also offer our clients with assistance regarding installation and functioning of the product.

MOISTURE SEPARATOR cum FILTER for Compressed Air and Gas

Fully sealed high efficiency cyclonic type Mechanical Moisture Separator cum FILTER MECHANICAL MOISTURE SEPARATOR ( CYCLONIC)

Working Principle : Moisture laden Compressed Air enters in to the moisture separator moves in cyclonic motion around the Inner Pipe . The direction of the Compressed Air is guided by the baffle plates (fixed at a angle). This Compressed Air impinges on the M.S. baffle, which allows the moisture to get separated from the Compressed Air . The moisture free Compressed Air enters through the bottom of the inner pipe passes through 100 micron S.S. Mesh (fixed inside the inner pipe). Finally the Compressed Air which comes out is free from physical moisture (upto 85% ) and also free from solid particles (upto 100 micron)

SALIENT FEATURES :

• EFFICIENCY UP TO 85%
• SOLID PARTICLES DOWN TO 100 MICRON
• OUTER SURFACE IS POWDER COATED
• ALL INNER PARTS ARE COATED WITH ANTI CORROSIVE PAINT
• NO POSSIBILITY OF MOISTURE CARRY OVER DUE TO LARGER MOISTURE COLLECTION.

High Efficiency Micro filter (for Compressed Air) and Sterile Filter (Bacteria Removal Filter for Vacuum Line)

Compressed Air & Oil Filter
CAPACITY: Up to 5000cubic meter per hour
DESIGN/MANUFACTURING CODE: IS 2825, ASME section VIII, Division –1
Material of Construction: As per IS 2002 / SA516
Accessories: Pr. Gauge, Safety Valve, Auto/manual drain valve
Grade of Filtration: 5- 50 micron of solid particles

We undertake turnkey project for installation of Air/Gas Pipeline with Air Compressor, Receiver, After Cooler, and Air Dryer etc.

Our range of Pneumatic Automation products are widely reckoned among our clients for its high quality and superior functionality. These can be avialed from us at industry leading price. Our range includes:

• Sensors/Transmittors
• Actuators
• Transfer Units
• Intermediate Lift and Transfer Unit
• Pop-up Table
• Pneumatic Stoppers