We manufacture a wide range of oil pressure switches, which are used to give an indication (either to a warning light or other indicator) when the oil pressure in the engine decreases or increases beyond the specified limit. The function of this switch is of utmost importance, as failure to note the fall or rise in pressure may result in engine getting seized or malfunctioning. The most important point for developing and manufacturing these switches are :

• The fitment specs (thread sizes, hex sizes, length, output type - blade/screw etc)
  
• The working specs (ON /OFF Pressure)
  
• The environment (Temp., Humidity, Pressure)
  
• The media (i.e. water/ oil / air)
  
• Overload pressure
  
• Burst Pressure

Each and every switch of our range is stringently checked as per the IS/JIS/AIS test specifications and only then is dispatched to clients.

We offer following types of oil pressure switches:

• NO (Normally Open Contacts)
• NC (Normally Closed Contacts)
• NOC (Normally Open and Closed Contacts)
• Pressure switches with adjustable pressure range

Our oil pressure switches find application in following areas and industries:

• Automobile industry
• Marine industry
• Hydraulic industry
• Engines & Gensets applications

We are engaged in manufacturing, supply and export of superior quality reverse or back-up light switches, which are used to ON/OFF the reverse lamp when the vehicle is backing up or engaged in reverse gear. We are OEM Suppliers to most of the vehicle and gear box manufacturers and hence use high grade materials to fabricate these switches.

We manufacture a comprehensive range of brake light/stop light switches, which ON/OFF the brake and stop lights in vehicle, when the brake pedal is pressed or brakes are applied. Complying the international quality standards, these switches are supplied to large numbers of OEMs. We hold expertise to custom manufacture them as per the specifications sent by clients.

We offer following kinds of brake switches :

• Mechanical type (Pedal/Lever pressed)
  
• Air Brake Switches (With Air Braking System)
  
• Hydraulic Brake Light Switches (Which use Hydraulic Oil as Braking Medium)

Establishing a strong footing in the automobile industry, we offer our wide range of solenoid switches / valves like carburetor solenoid switches, solenoid switches, air brake solenoid valves, starter solenoids and many more. Our high standard carburetor solenoid switches, which are also known as idle cut off switches are used to cut off the fuel supply to engine when vehicle is switched off.

We are pioneers in India to have manufactured carburetor solenoid switches and supply them to popular vehicle manufacturers. In addition, we also manufacture and supply self solenoid switches, which are used to provide high starting current to starter motor and to facilitate the meshing of drive pinion with bull gear.

We hold expertise to manufacture and supply high standard air & oil pressure transducers / sensors. The oil pressure sensors offered by us come in two forms, they can be only transducer (only sensing function) as well as with dual function of both pressure sensor as well as switches.

These sensors are generally made of highly sensitive metallic diaphragm to provide precision pressure indication along with switching on the warning lamp in case of pressure falling below specification.

We offer best quality MVD make temperature sensors & switches, which sense & convert temperature into electrical / electronic signals so that the user can know the temperature of engine / other part where the sensor is fitted. They are like a "Thermometer" but instead of liquid, they use electronic Thermistors / Bimetal Switches to sense the temperature. The input to temperature sensor is in the form of heat / temp and the output (through terminals) is connected to the Gouge which shows the reading either through mechanical gouges (meters) or digital gouges.

The most important points for developing and manufacturing these switches are :

• Fitment specs (thread sizes, hex sizes, length, output type - blade/screw etc)
  
• Compatibility with Gouges (to ensure the same readings are passed)
  
• Selection of correct thermisters / bimetals
  
• Testing for performance at various temps
  
• Correct insulation
  
• Correct connection of terminals
  

Each switch/sensor of our range is made of best quality material and with the thermisters / bimetals from the reliable sources in the world. Each switch/sensor is checked in accordance with IS/JIS/AIS test specifications and only then is dispatched to the clients. We have all the tests for these in our in-house laboratory and take great pride in being a pioneer of such Temp Switches in India - being the first in India to manufacture such switches and supply as OEM to Tata Indica Cars.

We manufacture and supply Engine safety switches, sensors & solenoids, that are made using highest quality of materials procured from authenticated sources. Complying the international quality standards, our range is supplied to various leading Engine manufacturers like:

• Mitsubishi Engines
  
• Eicher Engines
  
• Leyland Engines
  
• TAFE etc.

Our range of gensets and engines items include the following :

• LLOP Sensor
  
• Water Temp Sensor
  
• Water Temp Safety Switch
  
• LLOP Switch
  
• Engine Shut Solenoids
  
• ETR / ETS Type Solenoids
  
• Flow Level Indicator Switches & Sensors.
  

Avail from us premium quality ignition/starter switches, which have gained wide eminence from leading Indian OEMs as well as after market distributors of USA, Europe and Middle East. These ignition switches find application in automobile industries for a variety of purposes.

Our ignition/starter switches are both ON/OFF Type or ON/OFF With Starter Function. Further, they also prevent the accessories from running down the car's battery, when the car is parked for a long duration. The ignition switches also connect the starter to battery, allowing the battery to send a powerful surge of electricity to the starter when the car is being started.

We offer an exhaustive range of miscellaneous switches & performance products for the various industries all over the world. Under this range, we manufacture a variety of items such as :

• Battery Cut Off / Isolator Switches (Dash Board Mounted / Panel Mounted / Chassis mounted): Both Single Pole & Double Pole type.
• Power Steering Switches
• Hazard Warning Switches
• Battery Studs / Feed Thrus
• Panel lights
• Starter Push Button Switches
• Radiator Caps / Thermostat Valves
• Connectors / Bulb Holders
• Head Lamp Relays
• Horn Relays
• Flashers
• Buzzers

We are a well established manufacturer of high standard heater plugs and resistor blocks, that are encountering wide demand in the global markets. The main function of heater plug is "Heating the combustion chambers of diesel engines in cold conditions". In comparison to petrol engines, diesel engines do not use spark plugs to induce combustion. But instead of it, they depend solely on compression. The piston rises, compressing the air in the cylinder and thus causes the air's temperature to rise. By the time the cylinder reaches the top of its travel path, the temperature in the cylinder is extremely high. Then, fuel mist is sprayed into the cylinder; it immediately combusts, forcing the piston downwards, thus generating the power. The pressure required to heat the air to that temperature, however, necessitates the use of a large & very strong engine block.

However, the problem posed is that in cold weather, if engine has not been running (as is the case when the car is left to sit overnight), that large engine block gets very cold; when one then attempts to start the engine, the cold engine block works as a heat sink, quickly dissipating the heat generated by the pistons compressing air. The engine is then unable to start, because it can not generate & maintain enough heat for the fuel to ignite. The method for fixing this problem is to fit each cylinder of the Diesel Engine with a glow plug.

Each MVD Make Glow Plug (or Heater Plug as commonly called) is fabricated from superior quality imported wire, which has high resistance and when electrified, heats due to electrical resistance and begins to emit light, (hence the term "glow" plug), the effect is very similar to that of a toaster. The heat generated by the glow plugs is directed into the cylinders & serves to warm of the engine block immediately surrounding the cylinders. This aids in reducing the amount of thermal diffusion which will occur when the engine attempts to start. However, the most important aspects of selecting a RIGHT "Glow plug" are:

• Right Voltage (Depending on the Engine / Application)
  
• Fitment specs designed by Engine manufacturer
  
• Ensuring the best thermal wire for high heat generation immediately on passing the current
  
• Ensuring the right insulation between body & thermal wire
  
• Ensuring the right design and testing capabilities of manufacturer
  

We manufacture a variety of superior quality tractors & agrimachinery switches and supply to most of the tractors & earthmoving manufacturers worldwide. Flawlessly designed to perfection, these switches are known amidst our clients for their durability and easy installation.

Our range include the following switches :

• Ignition Switches
  
• Lighting Switches
  
• Oil Pressure Switches
  
• Neutral Safety Switches
  
• Temp. Sensors
  
• Pressure Sensors
  
• Fuel Pump Solenoids
  
• Diesel Glow Plugs etc.
  

Our range of switches is supplied to leading distributors worldwide, to name a few :

• Massey Ferguson
  
• Case New Holland
  
• Ford
  
• Deutz etc Tractors
  

We are the first company in India involved in manufacturing and supply automatic transmission switches, solenoids & sensors as OEM to vehicle manufacturers. We are also the largest manufacturer and exporter of these parts to USA - supplying to the top names in automatic transmission industry including distributors and engine re-builders.

We offer different kinds of automatic transmission switches, which are enlisted below :

• Parking light switches
• Neutral safety switches
• Backup switches
• Pressure switches etc

Our transmission solenoids are an electro-hydraulic valves, which are used to control the fluid flow into and throughout an automatic transmission. We offer 2 type of transmission solenoids:

• Automatic transmission solenoids
• Manual transmission solenoids

Apart from this, we are also the largest manufacturer of turbine speed sensors (input/output) for transmission applications from India.