MV Instruments

The Dualmotor Model:

This model is a Water Level Controller which is a completely Automatic System with Built-in advanced 'Pumpset Protection Circuitry' and "Automatic Power Changeover Circuitry" and Power Selector Switch. This system can be adopted where there are two pumps installed for a common task as Main Pump and Stand-by Pump.

• The system automatically controls pumping of water from Underground Sump / Well / Borwell to Overhead Tank.
• The system has an intellegent "Automatic Power Changeover Circuitry" which will changeover from one pump to another pump after every pumping operation.
• This automatic changeover keeps both pumps in running condition and makes sure that both pumps are in good condition all the time.
• The system is ideal for places where one main motor and one standby motor are installed for reliability reasons.
• The system also provides Dry run protection to the Pumpset. ( i.e. when water is not being pumped into Overhead Tank due to any reason).
• The system provides Low voltage and High voltage protection for the Pumpset.
• The system has Surge Voltage/Current Protection for the Pumpset.
• The system can be upgraded into "Multi-tank control system" to maintain water level in several overhead tanks.
• The system also has built-in industrial grade pump selector switch for both single phase and three phase motors as a provision for Manual Changeover.
• This system is suitable for similar types of starters only, either single phase or three phase starters.
• The system comes with Industrial Grade Electronic Components, Reliable Power Supply and Power Contactor in Powder coated Metallic Enclosure.
• This system is based on AC sensing technology, hence the sensors non-corrosive and maintenance free.
• This system is suitable for Residences, Commercial Complexes, Residential Apartments and Industries where for reliability reasons two motors are installed.
• The system has three position Power Control Toggle Switch with "Auto" mode, "Off" mode and "Manual" mode.
• In "Manual" mode both the Pumpsets can be controlled directly using selector switch and level controller gets completely shutdown and bypassed.
• The system comes with maintenance-free Tin Coated Copper sensors and has unconditional FIVE Year Guarantee.
  

• The system automatically indicates water level in underground sump / overhead tank.   
  
• The different level indications are 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90% and 100%.
• The system has Three Digit Seven Segment LED Display to indicate the water level.
• The system can also provides Flow indication of water into the tank if required.
• When water level reaches 100% an audible Buzzer indication can also be provided.
• The system comes with industrial grade electronic components and powder coated metallic enclosure.
• This system is based on Pulse sensing technology, hence sensors need to be maintained periodically depending upon the hardness of water.
• This system is suitable for Commercial complexes, Residential Apartments and Industries.
• The system comes with Plastic Molded Stainless Steel Sensors.
• The system comes with an Unconditional ONE Year Guarantee..

• The system automatically controls pumping of water from Underground Sump / Well / Borwell to Overhead Tank.   
  
• The system also provides Dry run protection to the Pumpset. ( i.e. when water is not being pumped into Overhead Tank due to any reason).
• The system provides Low voltage and High voltage protection for the Pumpset.
• The system has Four Tank water level indications and Three Sump water level indications.
• The system also has the indication of water flow into the tank when pumping.
• The system comes with a 'Trigger Button' with which pump can be manually triggered to switch ON, if and when required, and then pump will be switched OFF automatically.
• The system has Surge Voltage/Current Protection for the Pumpset.
• The system comes with Industrial Grade Electronic Components, Reliable Power Supply and Power Contactor in Powder coated Metallic Enclosure.
• This system is suitable for the places where the regular monitoring of water level is necessary.
• The system has three position Power Control Toggle Switch with "Auto" mode, "Off" mode and "Manual" mode.
• In "Manual" mode the Pumpset can be controlled directly and level controller gets completely shutdown and bypassed.
• In this System, sensors need to be maintained periodically depending upon the hardness of water.
• The system comes with Plastic Molded Stainless Steel Sensors.
• The system comes with an Unconditional TWO Year Guarantee.

• The system automatically controls pumping of water from Underground Sump / Well / Borewell to Overhead Tank.
• The system also provides Dry run protection to the Pumpset. ( i.e. when water is not being pumped into Overhead Tank due to any reason).
• The system provides Low voltage and High voltage protection for the Pumpset.
• The system has Surge Voltage/Current Protection for the Pumpset.
• The system can be upgraded into "Multi-tank control system" to maintain water level in several overhead tanks.
• The system comes with Industrial Grade Electronic Components, Reliable Power Supply and Power Contactor in Powder coated Metallic Enclosure.
• The system is adoptable for any kind of starters of both Single phase and Three phase Motors.
• The system comes with a 'Trigger Button' with which pump can be manually triggered to switch ON, if and when required, and then pump will be switched OFF automatically.
• This system is based on advanced AC Sensing Technology, hence the sensors are non-corrosive and maintenance free.
• This system is suitable for Residences, Commercial complexes, Residential Apartments and Industries.
• The system has three position Power Control Toggle Switch with "Auto" mode, "Off" mode and "Manual" mode.
• In "Manual" mode the Pumpset can be controlled directly and level controller gets completely shutdown and bypassed.
• The system comes with the maintenance-free Level Sensors.
• The system comes with an unconditional FIVE Year Guarantee.

• The system automatically indicates water level in underground sump / overhead tank.   
  
• The different level indications are 20%, 40%, 60%, 80%, and 100%.
• The system can also provide Flow indication of water into the tank if required.
• When water level reaches 100% an audible Buzzer indication can also be provided.
• The system comes with industrial grade electronic components and powder coated metallic enclosure.
• This system is based on AC sensing technology, hence the sensors non-corrosive and maintenance free.
• This system is suitable for Residences, Commercial complexes, Residential Apartments and Industries.
• The system comes with the maintenance-free Level Sensors.
• The system comes with an unconditional TWO Year Guarantee.