Mytol Petroleums Private Limited

MYTOL COMPRESSOL oils are specially developed compressor oils to provide lubrication over extended period of high temperatures and high load conditions.

MYTOL COMPRESSOL oils are fortified with antioxidant, corrosion inhibitors and antiwear additives.

MYTOL COMPRESSOL oils have good emulsibility to allow entrained water to settle down.

MYTOL COMPRESSOL resists foaming.

MYTOL MONO 30 / MONO 40 are monograde engine oils made from highly refined base stocks and additive system.

MYTOL TOPGEAR oils are manufactured from highly refined solvent extracted petroleum mineral oils. The Oil provides a permanent stable film at the operating temperature encountered in the power transmission system.

They have high viscosity index and provides continuous lubrication during transmission of power in auto engines. This oil is suitable both for manual and Automotive Transmission.

MYTOL GENERAL PURPOSE MACHINERY OILS provide sufficient oiliness for general lubrication even under boundary lubrication conditions.

MYTOL GENERAL PURPOSE MACHINERY OILS have the ability to protect lubricated parts against rust and corrosion, maintaining thin film of oil under light and medium loads.

MYTOL GENERAL PURPOSE MACHINERY OILS are specially made from refined mineral oils having good adhesiveness and film strength.

MYTOL GENERAL PURPOSE MACHINERY OILS will reduce wear and cut down maintenance costs.

MYTOL THERM 500 HEAT TRANSFER OILS operate over the broad temperature in the range of -6~C to 300~C and can be used in non-pressurised systems. A major advantage of liquid heat transfer is lower cost installation and operation capital cost is reduced by elimination of large diameter piping, safety valves, steam traps and water treatment facilities. Operating cost is reduced by low maintenance requirements and reduced make up.This indirect form of heating a system is widely used to achieve a better control and uniform distribution of heat.

MYTOL THERM 500 HEAT TRANSFER OILS is manufactured using special refining techniques and is recommended for any type of well designed heat transfer systems, operating upto 300~C maximum temperature.

MYTOL THERM 500 HEAT TRANSFER OILS is used for most conventional operations and finds extensive applications to the textiles, pharmaceuticals, chemicals and processing industries.

MYTOL CTX 20W/50 is a superior Petroleum Engine Oil.MYTOL CTX 20W/50 is made from only refined Petroleum Mineral oils contained selective dispersant inhibitor and viscosity index improver. MYTOL CTX 20W/50 has excellent oxidation additives stability to resist oxidation and thickening under exposure to high operating temperatures.

MYTOL WATER DISPLANOL (OIL TYPE )
Is soft film de-watering type temporary corrosion preventive. It is made from selective solvent and petroleum oil containing wetting agents and corrosion inhibitors.

MYTOL WATER DISPLANOL (SOLVENT TYPE)
Is a thin film solvent based water displacing rust preventive. The fluid has good spreading characteristic and normally applied to wet metal by dipping and spraying..

MYTOL RUST SAFE
Is an oil based rust preventive which serves both as a lubricant and a protective coat against corrosion. This is made from refined petroleum oil containing low sulphur and fortified with special corrosion inhibitors. MYTOL RUST SAFE can be applied by dipping, spraying and circulating.

MYTOL RUST SAFE W
Is a soft greasy / oil film corrosion preventive which effectively fights against moisture ingression and finger print corrosion. It is applied by dipping or spraying.

MYTOL RUST SAFE HF
is a quick dry hard film plastic type rust preventive. It is tack free and contains oxidised bitumen for high degree of corrosion prevention. It is a non easily removable preventive coat. However, if need be, the film can be removed by alkaline degreaser.

The oil essentially meets API CD and U.S. MiL-L-2104C and IS496-1982 HD. Type 5 performance requirements.

MYTOL 2T is a genuine Two Stroke Engine Oil and is made from refined Petroleum Base stock, contains balanced detergent dispersant additive with a diluent.. MYTOL 2T is self mixing with petrol. MYTOL 2T provides : Easy Start, Less Spark Plug Fouling, Reduces Power Loss, Cleans Engine and reduces maintenance.