Description: 2.5 way Full Range Studio Monitor Operating Range: 25 Hz to 40 KHz Beamwidth HF: 90 degree X2 FR: SPL 1 Watt 93db Max SPL 116 dB avg 4 ohm continious power handling 220W LF: Max SPL 114 db SLP avg 4 ohm continious power handling 220W HF: Max SPL switch setting (0) 116 dB, setting (1) 118 dB avg 4 ohm continious power handling 100W Connections: Gold plated screw material terminals, bi-amp Dimensions(HXWXD): 1232mm X 430mm X 147mm Weight: 35 Kg each Screens: all screen options are available, the match system / digital prints.
Their ‘ultra-wide’ sound-field allows the stylish BMR™ rear speakers to be positioned unobtrusively, close to the floor, or ‘up high’ near the ceiling. The design allows for the speakers to be easily fitted even if skirting board or coving is present. The speakers can also be used free-standing with the supplied support.
The intelligent design of the rear speakers means that speaker cable can be routed along the skirting board or coving, especially useful when it is not possible to run cables through walls.
Model: DF65-50 for left and right speakers , DF-Multi 42" for centre channel speakers, Diablo Monitor for rear speakers and Diable Tech+ 1 for Subwoofer Speaker Screens: PWG
The Vento 809 DC is a three-way bass reflex front-ported system, comprised of two eight-inch woofers, one seven-inch midrange mounted above the one-inch dome tweeter. It sits atop a black shock-absorbing isolation base attached by four integral silicon shock absorbers and measures 44.1 inches tall, nine-and-eight-tenths inches wide (at their widest point) and 13.8 inches deep. The 809 DC is not a short speaker, but the small footprint makes it appear smaller than its measurements would suggest.
Quoted frequency response is 41 Hz to 24.4 kHz at +/- 3 dB, which goes down to 36 Hz at – 6 dB, with a sensitivity of 88.5 dB and an impedance of four to eight ohms. The 809 DCs are quite substantial in their build quality, weighing 62.9 pounds per speaker. The 809 DCs come with gold-plated WBT binding posts that are covered with a clear plastic cap insulator to prevent shorts and are bi-wire/bi-ampable. Thick jumper bars are included should you elect not to bi-wire. The remainder of the system is single wire only. The binding posts accept bare wire, pins and banana connectors.
The Evidence Master has set new standards in performance and product design. In a modular construction with selected real wood veneer and glossy piano lacquer, four basic drivers, two midrange drivers and two soft dome tweeters are positioned in a vertically symmetric array. The highly-developed , extremely sophisticated cross-over balances these drivers by implementing Dynaudio's DDC technology, reducing room refelections and giving incredible authentic and faithful music production.
The Q Acoustics 1000CB Wall Bracket is for use with the 1000Ci centre channel speaker. It features a rigid mounting system for safety and sound performance.
The Q Acoustics 1000WB Wall Bracket is for use with the 1010i and 1020i bookshelf speakers. It features a rigid mounting system for safety and sound performance. Simple adjustment allows for optimum speaker angle in all situations.
The NAD T785 is heir to many generations of award winning NAD designs. This exceptional pedigree is evident in both the look and the feel of the T785, and it is unmistakable the moment you listen. It is NAD’s insistence on creating products with remarkable sound quality at sensible prices that has made NAD the first choice among the most knowledgeable listeners from around the world. NAD’s “Music First” philosophy dictates that we endow our Surround Sound products with the same warm involving sound quality that makes music listening so rewarding with our stereo components. This stands in stark contrast to our competitors who view Surround Sound components primarily from a “content” point of view, with sound quality far down the list of priorities. Yet the T785 is second to none in terms of flexibility and up-to-theminute digital technology.
Output Power: 2 X 75 W into 8 Ohm, 2 X 125 W into 4 Ohm Speaker Terminals: 4 - 16 Ohm Frequency Response: 10Hz - 100 Khz, -3 dB Power Consumption: Standby 12 W Dimensions (HXWXD): 430 X 385 X 100 mm Weight: 13,5Kg Color Options: Black or Titanium
Output Power: 2 X 100 W into 8 Ohm, 2 X 180 W into 4 Ohm Frequency Response: < 10Hz - 100 Khz, -3 dB THD: < 0.07% Signal-To-Noise Ratio, Line: 100 dB Output Impendance: 0.06 Ohm Power Consumption: Standby < 25 W Dimensions (HXWXD): 430 X 385 X 100 mm Weight: 15,5Kg Color Options: Black or Titanium
Power: 120 Watts RMS per channel into 8 Ohms Distortion: Typically <0.05% THD at rated power. 0.1% TDH & IM worst case prior to clippi Current Output: 20A short duration peak per channel. Fuse protected Input Impendence: 47k Ohms Dimensions (HXWXD): 4" X 17.75" X 15.75" Weight: 10Kg (22lb)
Power: 200 Watts RMS per channel into 8 Ohms Distortion: Typically <0.05% THD at rated power. 0.2% TDH & IM worst case prior to clippi Current Output: 40A short duration peak per channel. Fuse protected Input Impendence: 47k Ohms Dimensions (HXWXD): 4.75" X 17.75" X 15.75" Weight: 14Kg (30lb)
A medium sized bookshelf design that exudes quality. The beautifully finished, low resonance cabinet encapsulates the 25mm ferro-fluid cooled tweeter and precision engineered 125mm bass driver to produce a speaker with extended bass, open mid-range and exceptional high frequency clarity. The 1000ST or 1000WB allow the 1020i to be stand or wall mounted.
A centre channel speaker with twin 100mm bass drivers and ferro-fluid high frequency unit to acoustically match and complement any of the 1000i Series. Can be wall mounted by using the 1000CB wall bracket.
This ultra compact bookshelf speaker sets new standards of sonic performance in its class. Suitable for both hi-fi music and home cinema use, it is an ideal match for the 1000Ci centre and 1000Si subwoofer. The 1010i can also be stand or wall mounted, using the dedicated 1000ST stand or 1000WB wall bracket.
The exquisitely proportioned flagship of the 1000i Series, the 1050i is both sonically and aesthetically enhanced by its integral aluminium plinth with ‘top configurable’ floor spikes. Twin 165mm drivers deliver exceptional bass extension and midrange clarity for both music and high energy movies. The overall sonic performance of this outstanding loudspeaker belies its affordable price.
The NAD T524 brings NAD quality and performance to an affordable price range. While the T524 is a natural partner to NAD’s line of high performance A/V Receivers, its superb performance and exceptional value make it an outstanding choice that will integrate well into any system. The T524 offers maximum flexibility and compatibility with varying audio and video formats including DVD-R, +/- RW, VCD 2.0 Jpeg and DivX, as well as DVD-Audio, CD, CD-R/RW, MP3 and WMA. DVD-Audio offers bass management which allows for users to further tune their audio to maximize the performance.
Video Performance Features: 2 X 108 MHz / 12 bits, Video DAC Twin Wave Laser Pickup Power Consumption: Operating: 38 W, Standby: 14 W Dimensions (WXDXH): 430 X 385 X 100 mm Weight: 3,5 Kg Color Option: Black or Titanium
Offering everything from the latest 1080p video output to superb 2-channel analog reproduction achieved by thorough attention to detail, this universal DVD player has a design that radiates a feeling of luxury.
DVD-Audio and Super Audio CD playback • High rigidity, high vibration damping mechanism • Large transformer exclusively for audio section • Top class 192kHz/24-bit audio DACs(2 channels x 4) • Audio Direct mode • 1080p video outputs via HDMI • HDMI interface (Ver 1.1) • Noise Shaped Video™ • Faroudja DCDi™ processing • High performance 216MHz/12-bit video DAC • Progressive Scan (NTSC/PAL) • Luxurious design with luminescent remote unit • MP3, JPEG, DivX® and WMA playback • RS-232C interface for a touch-panel controller • Wide screen mode selection
This dynamic, forward firing, active subwoofer boasts a powerful 100 watt amplifier driving a 200mm long throw bass unit. It provides a solid and compelling low frequency performance and is the basis of the award winning 1010i Series Home Cinema package (shown left).
The Dynaudio SUB 500 reproduces deep bass with a natural yet powerful balance. Its incredible low frequency response is due in part to the new 30 cm (12") long-throw woofer developed for this model, which also features an extremely rigid die-cast aluminium frame, geometrically optimized for optimum air flow, a large diameter aluminium voice coil and a powerful magnet system.
The SUB 500 employs a 250W integrated amplifier module that also uses Dynaudio's advanced CEC (Cone Excursion Control) technology. The CEC circuitry allows the SUB to play deeper, louder and deliver higher dynamics with lower distortion than conventional subwoofer designs quoting even much higher power ratings.
The anti-resonant driver is coupled to the cabinet on a stiff metal baffle that is itself fused to the rigid MDF cabinet through a sheet of special damping material. This multi-layered sandwich construction further minimizes resonance and the detrimental effects of such.
The included remote control allows all subwoofer settings - phase, level, crossover frequency, and extended bass mode - to be both adjusted and stored right from the listening position.
Four fully programmable presets each can store all parameter settings into the subwoofer memory, allowing for independent settings for music, movies, late night or party modes, for example, while allowing each to be simply recalled at the touch of a button. The memory functions are also able to be write-protected through a switch on the back panel so that they are not accidentally re-programmed.
• 7-channel 1,225 W Powerful surround (175W X 7 Max)
• 1080p- compactible HDMI (2 in/ 1 out) • Full analog video upconversion to HDMI with TBC (Time Base Corrector) • Deinterlacing (480i/576i or 480p/576p) • Quad-Field CINEMA DSP with 22 DSP Program • Digital ToP-ART with the finest parts used throughout • Pure Direct for higher fidelity sound reproduction • iPod compatibilities via optional Yamaha YDS-10 • Improved YPAO sound Optimization • On Screen Display • Assignable amplifiers for bi-amp connection • Superior multi-zone control compatibility
Description: 2.5 way Full Range Studio Monitor Operating Range: 15 Hz to 40 KHz Beamwidth HF: 90 degree X2 FR: SPL 1 Watt 95db Max SPL 114 dB avg 4 ohm continious power handling 220W LF: Max SPL 116 db SLP avg 4 ohm continious power handling 220W HF: Max SPL switch setting (0) 114 dB, setting (1) 116 dB avg 4 ohm continious power handling 100W Connections: Gold plated screw material terminals, bi-amp Dimensions(HXWXD): 1832mm X 430mm X 147mm Weight: 50 Kg each Screens: all screen options are available, the match system / digital prints.
The Evidence Temptation integrates the innovative Evidence Technology is a slim, elegant cabinet. The solid aluminium front baffle of the middle section is precisely CNC-machined to provide a solid foundation and reduce sound wave reflections to a minimum. The outstanding DDC Technology reduces to impress with absolutely pure, undistorted and dynamic sound in any individual living room.
• 7-channel 1,015 W Powerful surround (145W X 7 Max)
• 1080p- compactible HDMI (2 in/ 1 out) • Full analog video upconversion to HDMI with TBC • Deinterlacing and upscaling Through DHMI Output (480i/576i or 1080i/720p) • 4 SCENE buttons make operation much easier • Quad-Field CINEMA DSP with 17 DSP Program • Digital ToP-ART with the finest parts used throughout • Pure Direct for higher fidelity sound reproduction • iPod compatibilities via optional Yamaha YDS-10 • Improved YPAO sound Optimization • On Screen Display • Assignable amplifiers for bi-amp connection • Superior multi-zone control compatibility
Full HD 1080p With the latest Texas Instruments 1080p DarkChip3 DMD chipset makes home theater a reality. A native resolution of 1080p means over 2 million individual pixels at your command. That is more than twice as much detail as a 720p projector.
The Q Acoustics 1000ST has been specially designed for use with the 1010i and the 1020i bookshelf speakers. Both these models can be bolted to the stand to optimise performance. Luxuriously crafted from extruded aluminium with a pressure die-cast base, the 1000ST speaker stand also features integral cable management, ensuring unsightly cables are hidden from view. Spikes are provided with floor protectors, uniquely these can be adjusted from above reducing installation time.
Kabir Technology Private Limited Manufacturer of audio video distributors, digital video players, home theater receivers, video converters, 8 channel video with return data, 8 channel video, 1 channel video with return data and 16 channel video with return data.
ARK Logix Supplier of digital video recorder, digital video camera, wireless digital video recorder, security digital video recorder, industrial digital video recorder, wireless CCTV cameras and wireless metal camera.
Processing...
