Tipper For Truck

We are engaged in providing different types of Tippers, which are used to transport various material such as rocks, sand, gravel and aggregates. Our Trippers are offered in ranges from 12 cum to 27 cum according to chassis model such as MCV (16 Ton GVW), LCV (4Ton – 7 Ton GVW) and HCV (25 Ton and above). These Tippers are suitable for mining, earthmoving, and logistic purposes. For off the road (OTR) such as mining, we manufacture rock bodies.

Standard Tippers

142 inch WB

8.5 Cum on Eicher Terra 1613

8.5 Cum on TA 1613

150 inch WB

12 Cum Tipper

14 Cum Tipper

16 cum

19 cum

23 Cum

180 inch WB

26 Cum

192 inch WB

28 Cum

Heavy Duty Tipper

14 Cum

16 Cum

Rock body

12 Cum with 9 Degree Scow end

14 Cum with 9 Degree Scow end

14 Cum with 9 Degree Scow on URAl Chassis

Standard Tippers

Our clients can avail from us a wide range of Standard Tippers, which is available in variety of sizes such as 142 inch WB, 150 inch WB, 180 inch WB and 192 inch WB. We also offer Heavy Duty Tippers to our clients at cost effective rates. Garbage and municipal waste can be disposed using these Trippers. Our range is easy to operate and have low maintenance cost.

Specifications:

142 inch WB
8.5 Cum on Eicher Terra 1613
8.5 Cum on TA 1613
150 inch WB
12 Cum Tipper
14 Cum Tipper
16 Cum
19 Cum
23 Cum
180 inch WB
26 Cum
192 inch WB
28 Cum

Standard Tippers

142 inch WB

8.5 Cum on Eicher Terra 1613

8.5 Cum on TA 1613

150 inch WB

12 Cum Tipper

14 Cum Tipper

16 cum

19 cum

23 Cum

180 inch WB

26 Cum

192 inch WB

28 Cum

Send Enquiry

Rock Body

Our clients can avail from us Rock Body, which is available in sizes, 14 Cum with 9 degree scow end, 12 Cum with 9 degree scow end and 14 Cum with 9 degree scow on Ural chassis. Manufactured using superior quality raw material, our Rock Body is extremely durable. Further the Rock Body is easy to operate and requires low maintenance.

under this ---

12 Cum with 9 Degree Scow end

14 Cum with 9 Degree Scow end

14 Cum with 9 Degree Scow on URAl Chassis

Technical Specification 12 cum. Rock Body

Cubic Capacity	12 Cum
Carrying Material	Rocks
Side Panels	5 mm thick Steel plate reinforced by front, rear and intermediate stiffeners. With provision of Rock Breakers.
Canopy	2/3 in length and full width coverage of the cabin for adequate protection & additional strength
Floor	Sandwich floor: Top plate of 8 mm thickness, bottom plate of 4 mm thickness. Wood (50 mm thick) having Tongue & Groove configuration is sandwiched between these 2 plates. The wood softens the blow of the rocks on the floor thus ensuring longer life of the body.
Hoist	Hyva make FE-149-3-3700 Cylinder or equivalent, Oil tank, Air control valve, Necessary hoses and fittings, Body clamp
Tipping Angle	49 Degree (Max.)
Other Features	Ladder and steps, Tail Lamp Guards, Mud guards etc.
Painting	Painted with one coat of zinc chromate primer and two coats of Enamel paint.

Send Enquiry

Heavy Duty Tipper

We have attained immense appreciation owing to our Heavy Duty Trippers, which come with ladder pipe, mud guard, mud flap and tail lamp guards. Manufactured using high grade steel, these Trippers are extremely durable. These Trippers are painted with two coat of fast drying enamel paint and one coat of zinc chromate primer for rust prevention.

Specifications:

14 Cum
16 Cum

volumetric capacity	14 cum
overall dimension of body	4. 72 m l x 2. 35 m w x 1. 275 m h
tipping angle	47 degree (max. )
carrying material	aggregate, coal, sand, gravel, etc.
side panels	5 mm thick steel plate reinforced by front, rear and intermediate stiffeners. With provision of rock breakers.
canopy	full coverage to the hoist of adequate strength.
floor	8 mm thick steel plate reinforced by the cross bearers with body runners. The floor plate is reinforced by 5 nos. 32 x 32 sq. Bar. They assist in softening the effect of heavy rocks on the floor. Hence increasing life of the body
tail door	5 mm thick steel, reinforced with intermediate stiffeners.
hoist	hyva make fe129-3-3700 cylinder or equivalent, oil tank, air control valve, necessary hoses and fittings, body clamp
other features	ladder pipe, mud guard, mud flap, tail lamp guards
painting	painted with one coat of zinc chromate primer and two coats of quick drying enamel paint of costumer choice.

Send Enquiry