Concrete Cutter Machine NCM 350 with 10 hp AC Electric motor specially design cutter unit with heavy duty frame and standard bearing inside the rotating wheel which prevent the bubbling the cutter machine.

Machine Cutter capacity width	6 to 12 mm
Depth	10 to 100 mm
Blade Size	3.4 x 10 x 350 mm
Type of Current	440 Volt 3 Phase 50 Hz.

Vacuum Pump NCM 345N with 7.5 H.P. AC Electric motor specially designed pump unit with heavy duty housing and sealing, Adjustable vacuum by valve on top of tank for easy operation with different mix designs us.

Pump Capacity	135m3/Hr
Max. Vacuum	760 mm Hg.
Operational Time	10-15 Minutes (for 24 S.Q.M.)
Type of current	440V 3Phase 50 Hz

Machine can be operated as power trowel. All the controls are easily accessible to the operator. The handle acts as dead man's grip and safety device i.e., the machine functions only till the operator holds on the handle and dead man's grip pressed together. The design ensures that disc and blades can be changed very quickly and easily. The trowel blades and floating disc are made of Sp. steel and troweling blades are reversible and hence give double service life.

Out Put Shaft Speed	120 R.P.M.
Max. reach about	3 Mtr.
Power	3 H.P.
Type of Current	440V 3 Phase 50 Hz

The screed vibrators for panel width upto 4 mts are used for most types of concrete floor. Tensioning device is provided through the length of beam unit to prevent the sag of the beam unit resulting due to the weight of vibrator unit. Self traveling and only to be guided alongwith the work pulled by two operators at both ends.

Beam spacing	300 mm
Height and beam	100 mm
Standard length	4.2 Mtr.
Power (Type 3 Ph. 50Hz 440 Volt)	1 H.P.