National Cutting Tools

We are offering threading chaser, if one peace of a chaser set is damaged is beyond use peace of the other chaser set lying in stock may be used and there will not be any difference in threading performance and the damaged set can be replaced without the necessity of replacing
entire set.

We are offering pipe threading machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost.

- All the necessary requirements are combined in
this model to from the basic fundamentals of correct threading.

We are offer thread rolling machine in all size.

Offering rebar coupler is applied to reinforced concrete construction in various kinds of construction projects. It is regarded as an innovated construction material and connection, with characteristics of 'energy-saving, environment friendly and high efficiency'.

- It is a technical product highly pushed by national and district construction department.

- Its features are :
1. A new way for rebar mechanical connection with high quality and efficiency.

2. Easy operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing.

3. With the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part.

* Features :
Rebar threading Machine The threading machine is used for cutting external thread on steel pipe, bar, rod, pvc pipe, bolt etc., by chasing method.
- HSS tangential chasers are used as cutters. The component remains stationery and Die Head rotates. BSP, BSPT, NPT, UNF,UNC, BSW, Acme etc., threads can be cut on this machine depending upon the type of Chasers.

- The machine mainly consists the following :-
Base, head Stock, Saddle, Pillar Type or Bed Type Clamping Vice, Die Head.

Offering NCT brand threading machine :

- The bolt threading machine is used for cutting external thread on bolts, rebar, pipe by chasing method. HSS tangential chasers are used as cutters. Bolt remains stationery and die head rotates. Metric, BSP, BSPT, NPT, UNF, UNC, BSW, ACME threads can be cut on this machine depending upon the type of chasers.

* The machine mainly consists the following :-
Base, Head stock, Saddle, Pillar type or bed type clamping vice, Die head.