Sand & Shot Blasting Equipment & Machines

We are engaged in offering our clients an unmatched range of Portable Abrasive Blasters. These equipment are essential for shot blasting process of abrasives. Our Portable Abrasive Blasters can be handled easily and require less maintenance.

 

For detailed Technical Specifications refer the PDF file

It place complete ON/OFF control of machine in the hand of operator at blast nozzle. It saves abrasive consumption when operator changes position or performing spot blasting and provides added safety to operator and other personnel in the area. Machine fitted with Remote Control System is designed with "R" such as P7-301R, P7-1001R and so on

It is recommended for economical wet, dustless, blast-cleaning with P 7 type blast machines on such jobs as cleaning structures of stones, brick, concrete etc. Wet blast nozzle is attached to abrasive blast nozzle to provide wetting of dry air-abrasive stream prior to its forceful discharge from the nozzle orifice. Also serves to wash off finished surfaces with clean pressurized air-water stream after shutting off abrasive supply

Works on induction-suction principle of abrasive delivery. The super blaster ensures continuous working and no interruption in blasting cycle. Recommended for light and medium size components where surface is to be cleaned or deburred or to impart with fine matte finish. Useful for heat treatment shops. Tools, die and mould makers and shot peening of light metal components etc. Sb machines are incorporated with reclaimer which ensures uniform clinging and finishing each time and in every next operation. This is achieved by an automatic system of abrasive cleaning and separation built into the reclaimer. Dust and debris are separated and only clean and sized abrasive are carried to blast gun-ensuring a homogeneous finishing. Most cabinets of other make do not have the reclaimer as standard practice.

options available on request :
l rubber lining inside walls of cabinet
l reverse jet cartridge filter dust collector
l higher output blast gun in place of standard
l food operated treadle switch for blasting on/off
l fitted with optional accessories

Works on direct pressure principle of blasting. The pressure blaster produces high abrasive velocity resulting in cleaning of job at a faster rate. A pressure vessel directly bolted below hopper of cabinet has automatic abrasive refilling arrangement. A tubular fabric bag dust collector with generous filter area is attached with cabinet as standard feature for high efficiency of dust collection. A manual shaker is also provided for bad shaking. PB is recommended for fast cleaning, for removal of heavy rust and corrosion using coarse abrasive, it is most suitable for etching the surface needed for rubber lining, FRP lining and metal spraying. Castings and forgings are cleaned speedily. Blast Pressure can be controlled from 30 to 90 psig. Almost all types of coarse and medium size abrasives can be used depending upon application.

Available in three standard models :
l PB-9182
l PB-12090
l PB-150120

Options available on request :
l Motorised bag-shaking arrangement.
l Reverse jet cartridge filter dust collector.
l Higher output Blast Gun in place of standard.
l Foot operated treadle switch for blasting ON / OFF.
l Fitted with optional accessories.

Works on induction-suction principle of blasting. The most important point in wet blasting is its ability to use very fine abrasive-as fine as 5 micron. Fine abrasive particles are suspended in liquid, usually water and then pumped to a nozzle as a slurry. At nozzle, the slurry is introduced into air - stream and propelled against job. The glandless slurry pump is used to feed the slurry at positive pressure into blast gun. The wetted parts of pump are of thermoset plastic material for corrosion resistance. Wb machine is useful in tool room to remove feather burrs from multi tooth cutting tools such as milling cutters, broaches and taps eliminating hours of hand honing time. It deburrs intersecting holes in precision parts which are inaccessible by any other method. The finest machined surface can be super finished without damage to sharp edges and exact tolerances.

Available in three standard models :
l wb-9182
l wb-12090

Options available on request :

l high capacity slurry pump for high output.
l higher output blast gun in place of standard.
l foot operated treadle switch for blasting on / off.

The turntable is fixed inside the cabinet on bearing for easy and free manual rotation of jobs.

Turn table diameter (mm) : 500 & 700
Load capacity : 50 kg

Tumble Basket is mounted on side door to suit cabinet size. Basket is easily removable when not needed. Blast period is controlled by a timer. It is suitable for automatic batch blasting of smaller parts such as balls, rings, screws, nuts, tools etc.

Tumble Basket Length /Dia. mm : 300/250 & 350/300
Load capacity : 20 & 25 kg

Our clients can avail from us Turn Table and Mounted Track Extension. In this system the turntable is fixed on work car and the track extension provided inside and outside of cabinet to facilitate the movement of work car. These are suitable for handling large and heavy components.

• Work car Length mm : 600, 750 & 900
• Track Extension Length mm : 1500

We are engaged in offering a vast range of Turn Table With Water Wash Pans. The Turn Table is fixed on work car and water wash pan is provided with splash guard. It facilitates rinsing of components after wet blasting operation. Turn Table With Water Wash Pan is suitable for handling large and heavy components.

• Work car Length mm : 600 & 750
• Water wash pan length mm : 1500