We offer a wide range of double interlock and square lock flexible hose pipes that are fabricated by spirally winding a preformed metal strip over a mandrel. These can be supplied wth packing or without packing as per the requirements of our valued clients that are spread across the world. Our range is available in different sizes, lengths and end fitting configurations. These are manufacturered in GI & satainless steels.Following are the salient features of our range:

• Durable
• Flexible
• High tensile strength

We are engaged in offering an assortment of corrugated hose pipes that are manufactured by using high grade raw material suh as SS 304,316,316L & 321. Our hoses are widely used for conveying liquids and gases as per the requirement of the customers. The hoses can be supplied with single or double ss wire braiding depending on operating pressure of the fluid. These are manufactured on the basis of pressure, temperature, media, flexing requirements & environment and have the following benefits:

• High strength
• Resistance to temperature
• Anti corrosive
• Capable of absorbing vibrations and noise
• Connects misaligned rigid piping, moving parts of machinery or equipment
• Practical for hooking up frequently moved or dismantled equipment

Besides this, following are the specifications of our range:

• Available in sizes that range from 1/4" I.D. (inside diameter) to 12" I.D
• Available in a,b and c class flexibility

We also manufacture and supply Strip Wound hose making machines suitable for making double interlock and square lock metallic hoses with or without packing using GI & Stainless Steel strips.The machines are suitable for making hoses in sizes 5mm through 300mm.

We offer a wide range of expansion bellows that are manufactured to provide better security & flexibilty. Our bellows are extensively used for absorbing the movement in pipes that are caused because of the thermal expansion and vibrations.  These are fabricated by using annealed  321 stainless steel sheet stock that is rolled into a tube and seam welded. Besides this, titanium and 316 stainless steel are also used to fabricate the bellows as per the client’s requirements. our expansion bellows are used for the following:

• Diesel generator exhuast and boiler fuel
• High and low-pressure turbine piping
• Main feed pump suction
• Propeller shaft air system
• Condensate pump suction
• Saturated and superheated steam

Our precision engineered expansion bellows making machines are manufactured by using high grade raw material and are available in different models. Our machines can be used for making connectors which are suitable for use in the silencers of vehicles. These are durable and are extensively used in generators & exhaust of vehicles.

We offer a wide range of pipe fittings that are manufactured from high grade raw material as per the requirements of clients. Our range is offered in two forms namely threaded pipe fittings and socket weld pipe fittings.

Threaded Pipe Fittings: These are available in various forms such as Threaded Elbow, Threaded Tee, Three piece Union, Threaded Couplings, Threaded Half Coupling, Hex, Head Threaded Cap, Hex, Head Bush, Hex, Head Plug, Square Head Plug, Threaded Couplet, Reducing threaded Hex, Nipple and Male & Female Hex.Adaptor.

Socket Weld Pipe Fitting: These are offered in different forms such as Socket Weld Tee, Three Piece Socket Weld union, Socket Weld Coupling, Socket Weld Half Coupling, Socket Weld Bulkhead coupling, Socket Weld Couplet, Reducing Inserts and 90 degree socket weld elbow.

Manufacturing standard:
 
ANSI B 16.11 AND BS-3799.

• Material:carbon steel to ASTM A 105.
• Alloy steel to ASTM A 182 GR. F-12 and F-22.
• stainless steel to ASTM A 182 GR.F-316,F- 304 ,F-316L,F-304L.
• Pressure Rating : 2000 lbs /3000 lbs/6000lbs for threaded fittings and
• 3000 lbs/6000 lbs/9000lbs for socket weld fittings

Test Pressure:1.5 times The Pressure Rating.
Sizes:1/8" NB thru 2" NB

Marking: Manufacturer's Name/Trade mark,Material, Pressure Rating,  Norminal Pipe Size and Threading.

Threading Specification: NPT to ANSI B2.1 and BSP/BSPT to BS-21.

Tube fittings offered by us are manufactured by using high grade raw material as per the requirements of our valued clients. Our range is widely used in different industries and is available in varied forms such as Male Branch Tee, female Branch Tee, Equal Tee, Bulkhead Tee, Male Run Tee, Union Elbow, Male Elbow, Bulkhead male Connector, Tube Union, Male Connector, Female Connector, Tube Cap and Tube Plug.

General Specifications:

• Manufacturing Standard : Ermeto Type, Swagelok Type, Parker Type, Olive Ferrule Type, Internal Flare Type, External Flare Type.
• Material of Fittings : Brass to IS-319 Type-I (1/2 hard), SS304, SS316, Mild Steel to BS-970 EN-1 A, Teflon (PTFE).
• Tube Sizes & Material : 1/8" THRU 1" OD, 1/4" NB THRU 3/4"NB, 4mm OD THRU 20mm OD, Copper, SS304, SS316 and Plastic Tubing (Nylon, LDPE/HDPE).
• Pressure Rating : NP 100, 160, 250, 400, 640.
• Finish/Plating : Natural Finish for Stainless Steel Fittings, Passivation/Nickel Plating on Brass. Zinc/Cadmium Plating on Mild Steel with or without Passivation.
• Pipe Threading : NPT to ANSI B2.1, BSP/BSPT to BS-21.
• tube side threading: metric/BSP/UNF/UNEF.

These are available as two valve manifolds with integral mounting and remote mounting in material SS 304 and 316 .These are used for pressure gauges and pressure transmitters.one valve is used for process isolation and the other one for drain/vent.

These are available as three valve manifolds with integral mounting and remote mounting in material SS 304 and 316.
these are used for diffrential pressure transmitters and gauges.Two valves are used for process isolation and the third valve for equalising HP & LP side of transmitter.
Five valve manifolds are available in remote and integral mounting design and in material SS 304 and 316.These are also used for differentialpressure transmitters.Two additional valves are for drain/ vent.

CNG filling Nozzles are used in CNG dispensers for filling cng in auto rickshaws,cars,buses and other commercial vehicles.These are available in two types in SS 316 material:

• 1/4" NPT (F) connections
• 9/16"-18 UNF(M) connections

We offer an assortment of needle valves that are manufactured from high grade Material: Brass, carbon steel, SS 304, SS 316 as per the requirements of our esteemed clients. Our range is widely used in different industries and are provided with tube ends , mounting screws and a jam nut on bonnet for mounting, needle valve with socket weld ends, needle valve NPT (M ) X tube ends, needle valve NPT (F) and tube end with jam nut on bonnet for mounting. Following are the specifications of our needle valves.

• Sizes: 1/4"thru 1"
• Material: Brass, carbon steel, SS 304, SS 316
• Pressure Rating: 250 and 640 NP

we make condensate pots and seal pots which are fabricated as per customer's design in accordance with ASME codes. These are fabricated out of seamless pipes with end caps welded on both sides. The  inlet,outlet & vent connections are made from forged rods and can have socket weld or threaded connections.These are available in 3000# and 6000# rating and in materials conforming to ASTM A 106 GR B, ASTM 182 GR P-22 & ASTM A 182,GR P-316/304.

We manufacture diffrent types of Instrument erection hardware and accesories as follows:

• Pulsation Dampeners/ Snubbers
• Air Distribution headers
• Non return valves
• Syphons
• Thermowells
• Quick Release Couplings
• Control valve Lubricators