Our BG series digital force gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG series digital force gauge can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator.

Compatible with all Mark-10 test stands and grips.

RS-232, Mitutoyo and analog outputs

GCL-Gauge Control Language for full computer control

Automatic timed output on RS-232

Dual set points with outputs

Averaging mode for average readings over time

External trigger for contact or switch testing and data capture

General purpose I/O for external device control

Programmable analog and digital filters

Selectable units of measurement

Programmable default configuration

Peak memory for tensile and compressive forces

Push-button calibration

Battery or AC operation

Programmable automatic shutoff

Reversible aluminum housing for handheld use or test stand mounting (see below)

Same housing size for all capacities

Accuracy: ± 0.2% of full scale ±1 digit
Sampling rate: 65 readings/sec
Safe overload: 150% of capacity
Battery life: 8-10 hours per charge
Weight: 0.9 lbs (0.4 kg)
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
Warranty: 3 years CE mark

The BGI torque gauge is a unique product designed for working in conjunction with a variety of interchangeable remote force and torque sensors listed below. The sensors do not require calibration or setup - the BGI torque gauge automatically recognizes any sensor. All configuration and calibration data is saved in the sensor's connector. Simply plug and play!

Fully interchangeable force and torque BGI force/torque sensors with "personality" modules

Unlimited number of sensors possible due to unique design

Programmable default configuration for each sensor

RS-232, Mitutoyo and analog outputs

GCL - Gauge Control Language for full computer control

Averaging mode for average readings over time

External trigger for data capture and switch testing

Programmable dual set points with outputs

General purpose I/O for external device control

Programmable auto-shutoff

Selectable units of measurement

Push-button calibration

Battery or AC operation

Peak reading memory

Accuracy: ± 0.1% of full scale ±1 digit + sensor's accuracy
Sampling rate: 65 readings/sec
Battery life: 8 hours per charge
Weight: 0.9 lbs (0.4 kg)
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
Warranty: 3 years CE mark

Our CT series cap torque tester present a powerful, yet value priced solution for closure manufacturers, bottlers, food and beverage companies, and others. The cap torque tester features a solid aluminum housing and rugged construction for many years of service in laboratory or production environments. Adjustable posts effectively grip a broad range of container shapes and sizes, while a set of optional jaws are available as an alternative gripping method. The CT captures peak torque in both clockwise and counterclockwise directions for application and removal measurements.

Outstanding value

Accepts samples up to 7.5" (189.4 mm) dia.

Selectable units of measurement

Peak memory for clockwise and counter clockwise readings

Optional sample gripping jaws

Solid aluminum housing

Movable sample gripping posts

3 capacities available: 12 lbin (135 Ncm), 50 lbin (570 Ncm), 100 lbin (1150 Ncm)

Battery or AC operation

Accuracy: ±0.5% of full scale ±1 digit
Sampling rate: 30 readings/sec
Safe overload: 150% of capacity
Battery: 9V (non-rechargeable), 30 hours of continuous operation
Weight: 6.5 lbs (2.9 kg)
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
Warranty: 3 years CE mark

Our ST series torque tool tester present a simple yet accurate solution for testing torque screwdrivers, wrenches and other tools. Applications exist in manufacturing facilities in virtually every industry. The ST series torque tool tester features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments. The torque tool tester captures peak torque in both clockwise and counterclockwise directions.

Rundown fixtures are available to assist in obtaining accurate readings when testing power torque tools.

Outstanding value

• Accepts many types of torque tools
• Selectable units of measurement
• Peak memory for clockwise and counterclockwise readings
• RS-232 and Mitutoyo (Digimatic) outputs
• Optional bench mounting bracket
• Solid aluminum housing
• 3 capacities available: 12 lbin (135 Ncm), 50 lbin (570 Ncm), 100 lbin (1150 Ncm)
• Battery or AC operation
• Mounting holes for bench mounting

Accuracy: ±0.5% of full scale ±1 digit
Sampling rate: 65 readings/sec
Safe overload: 150% of capacity
Battery: 9V (non-rechargeable), 30 hours of continuous operation
Weight: 4.8 lb (2.2 kg)
Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
Warranty: 3 years CE mark