IndiaMART.com

Products & Services

Water Treatment System

We are an eminent organization engaged in offering superior quality Water Treatment System, which can be used for commercial as well as for domestic applications. Under the offered array, we provide Dosing Systems and Ozone Generators. The demand of offered water treatment systems is increasing with a rapid pace as these are manufactured by making use of the optimum quality raw material with the assistance of professionals. Prior to dispatch, we make these water treatment systems pass a quality check so as to ensure their durability, reliable performance and less maintenance. To ensure the higher level of patron satisfaction, we provide these water treatment systems as per their specified details.

Iron Removal Systems

Iron Removal Systems

Iron is an objectionable constituent of portable water. Iron in water imparts a bitter characteristic, metallic taste and cause oxidized precipitate. Color of water, which may be yellowish brown to reddish brown, symbols the water objectionable or unsuitable for use. In addition to this, Iron stain everything with which it come in contact. Iron exists in water in two levels. One as the bivalent, Ferrous Iron (Fe ++) and the second one as the trivalent, Ferric Iron (Fe+++). The Ferric Iron generally occurs in the precipitated form. Iron forms complexes of hydroxides and other in-organic complexes in solution with substantial amount of bi-carbonate, sulphate, phosphate, cyanide or halides. Presence of organic substances induces the formation of organic complexes which increase the solubility of Iron. The waters of high alkalinity have lower iron than waters of low alkalinity.

Causes of Iron:


Iron contamination causes stains on your sinks and bathroom tiles. Stains appear on your faucets and fixtures. Pipes corrode washing machines, water heaters, dishwashers, steam irons, showers and radiators fall prey. Up to 50% of their life and efficiency gets reduced, adding up 25% in maintenance and running costs.

If iron water is consumed it can cause loss of appetite and tissue damage. When used for bathing it causes skin rashes and hair loss.

Iron removal process description:


Stage I - Chemical dosing

To level the pH factor, chemical pre treatment is done in order to facilitate rapid aeration than the chemical dosed water send in to the aeration tanks

Stage II- Online aeration Type

Chemical dosed water is sent into the aeration tank consisting three chambers. The raw water is allowed to sprinkle at the first chamber through specially designed perforated pipes. The water travels from first chamber to other two chambers through accurately designed multiple vents at variable levels of the bifurcate walls, thus provides ZIG ZAG motion. When the water reaches the third chambers the dissolved iron gets oxides and become suspended iron.

8 Hours Storage Aeration Type
Chemical dosed water is pumped in to aeration tank. The raw water is allowed to sprinkle (at the tank/sump) via designed perforated pipes and allowed to remain there for about 8 to 10 hrs to get oxidized through the natural process and the iron presence in the water becomes suspended iron.

Stage III - Filtration

The suspended iron water is passed through Iron removal unit, the filter media is supported on gravel bed that consists of multiple layers of progressively larger sizes of manganese di oxide, activated carbon 900iv, graded quartz sand, fine sand, super fine white sand and pebbles, which retain the suspended iron particles. During the filtration cycle the filter bed retains the dirt and suspended particles from the water and accumulates within the filter bed.

Backwash:

As the filtration progress the filter media gets loaded with the retained particles, this results in a continuous increase of pressure drop across the filter, when a predetermined pressure drop level is achieved the filter is shut down for cleaning. After backwashing the filter is rinsed with raw water and after the quality of water is achieved the filter is put back into service.

Product model:

Our NONFERR iron removal plants comprise Mild Steel /SS / FRP Pressure Vessel, Frontal piping wok with manual/Automatic multi port valve butterfly valve/conventional valves for easy operation and control. Available from 1000 LPH to 1000000 LPH.

Kindly see Pdf for more Details:


Water Softening Plant

Water Softening Plant

Hard water is frequently unsuitable for many industrial and domestic purposes. When water is referred to as 'Hard' it simply means that it contains excess of calcium (Ca) and magnesium (Mg) ions than normal water. Carbonate hardness is known as temporary hardness and non-carbonate hardness is known as permanent hardness. The degree of hardness of the water increases when more calcium and magnesium dissolve ions. These ions have their origins in limestone sediments and also from carbon dioxide which is present in all waters exposed to the atmosphere and especially in ground water. The easiest way to soft the hard water is through Ion exchange process.

Hassles of hardness:

 

  • Hard water reacts adversely with detergents. It means even on your little (baby) ones aoft towels turn rough on their soft skin

  • Soaps and shampoos do not lather and leave you feeling unwashed. Your skin gets dry. Hard water makes hair dry and rough leads to hair loss

  • Hard water causes residual deposit and scale builds up. Damaging your appliances such as heaters, washing machines, showers, dishwashers etc. Appliances life comes down by 45%; their maintenance cost goes up by 25%. Causes deterioration and fading of fabrics. Also reduces fabric life by 15%.

  • Hard water leaves scales which clog pipes, faucets, valves and fixtures. Hard water reduces the cleaning power of detergents. Soft water reduces detergents requirements by about 70%.

  • Makes the food and water taste different. Cooking takes longer than ever before. Cooking gas consumption increases by 30%. Causes scale deposit on utensils

 

Water softening process:

Softening is the ion exchange process, it is done through resin, the most common and probably the easiest method of removing hardness (that is calcium and magnesium) from water suitable for utility purpose. As the name implies ion exchange is a process in which undesirable ions are exchanged for more desirable ions. The softening process consists of passing raw water containing hardness through a bed of action resin in sodium form. The hardness ions Ca & Mg are taken up by resin and in exchange, the sodium ions are relinquished from the resin. This is called the service cycle.

Chemical reaction during softening process:


  • Ca (HCO3)2 + Na2 R = RCa + NaHCO3

  • CaSO4 + Na2 R = RCa + Na2SO4MgCl2 + Na2

  • R = RMg + NaCl


Regeneration process:


Raw water will continue to get softened till the resin gets exhausted. Bringing back the resin to its original form is called regeneration. Softener resin is regenerated by sodium chloride- Nacl (Common salt) solution. The common salt solution is kept in regeneration tank. During the regeneration process, salt solution is injected by the ejector tube into softener. The Nacl (salt solution) replaces ca, Mg (Hardness) from the resin, the regeneration is done every day or every few days or every week depending upon the usage and design of the water Softener.

Chemical reaction during regeneration process:

 

  • RCa + NaCl = RNa + CaCl2

  • RMg + NaCl = RNa + MgCl2

 

Product model:


Our NATSOFT water softener plants comprise Mild Steel /SS /FRP Pressure Vessel, regeneration tank, ejector assembly, frontal piping wok with manual/Automatic multi port valve butterfly valve/conventional valves for easy operation and control. Available in 1,000 liters/hr. to 1,00,0000 liters /hr.

Multi Grade Filter

Multi Grade Filter

The MGF works on principle of retention and removal of physical impurity in a graded manner through Voids of the filtering media.

Function


The physical impurities of raw water i.e. suspended solids, dirt, dust & all visible particles are removed in Multi Grade Filter up to 50 micron.

Product Description

Multi grade filter is a depth filter that makes use of coarse and fine media mixed together in a fixed proportion. This arrangement produces a filter bed with adequate pore dimensions for retaining both large and small suspended particles. This filter performs at a substantially higher specific flow rate than conventional filters.

Process

Raw water passed through the Multi Grade Filter, it consists of a multi layers of filter media consisting graded sand, white sand, fine sand, activated carbon and pebbles layers, which retain the suspended particles and activated carbon adsorbs onto its surface free chlorine, organic compounds, colour and odour. During the filtration cycle the filter bed retains the dirt and suspended particles from the water and accumulates within the filter bed. As the filtration progress the filter media gets loaded with the retained particles, this results in a continuous increase of pressure drop across the filter, when a predetermined pressure drop level is achieved the filter is shut down for cleaning.


Backwash

The filter media is cleaned by backwash system. After back-washing the filter is rinsed with raw water and after the required quality of water is achieved the filter is put back into service. Depending on the filtered water quality required back-washing is either done with raw water or filtered water.

Range Of Product Model Availablility

Multi grade Filter is comprises of Mild Steel /SS / FRP Pressure Vessel, Frontal piping wok with manual / Automatic multi port valve butterfly valve / conventional valves for easy operation and control. Available from 1,000 Liters/hr. to 1,00,0000 Liters/hr.

Pressure Sand Filter

Pressure Sand Filter

We produce wide range of standardized and custom built filtration system to remove suspended solids from water. Pressure sand filter are used as per treatment system in RO plant (ROP) and post treatment system in Waster water treatment plants (STP & ETP).

Pressure Sand Filter Process

Raw water is passed through the pressure sand filter, the filter media is supported on gravel bed that consists of multiple layers of Graded quartz sand, Fine sand, Super fine white sand and pebbles of progressively larger sizes. During the filtration cycle the filter bed retains the dirt and suspended particles from the water and accumulates within the filter the water and accumulates within the filter bed. As the filtration progress the filter media gets loaded with retained suspended particles, this results in a continuous increase of pressure drop across the filter, when a predetermined pressure drop level is achieved the filter is shut down for cleaning. 


Back Wash

As the filtration progress the filter media gets loaded with the retain the suspended particles, this results in a continuous increase of pressure drop across the filter, when a predetermined pressure drop level is achieved the filter is shut down for cleaning. The filter media is cleaned by backwash system. After backwashing the filter is rinsed with raw water and after the required quality of water is achieved the filter is put back into service. Depending on the filtered water quality required backwashing is either done with raw water or with filtered water.

Product Model Availability

Our Pressure sand filter plants are comprises of Mild Steel /SS / FRP Pressure Vessel, Frontal piping wok with manual / Automatic multi port valve butterfly valve / conventional valves for easy operation and control. Available from 1,000 Liters/hr. to 1,00,0000 Liters/hr.

Carbon Filters

Carbon Filters

We are a coveted business organization engaged in catering to the variegated requirements of the customers by bringing Carbon Filters. Used for removal of odor, removal of color pigments from water, these filters are used as per treatment system in RO plant. Further, it is also used for post treatment system in waster water treatment plants (STP, ETP, ROP).

 

Process description:

 

  • The water passes through the Activated carbon filter

  • the filter media consist of activated granular carbon

  • Activated carbon adsorbs onto its surface free chlorine, organic compounds, color and odor The activated carbon bed is supported by a multilayer graved bed

  • The activated carbon bed is also backwashed at fixed intervals to dislodge any accumulated dirt particles

 

Back wash:

 

  • As the filtration progress the filter media gets loaded with the retained particles, this results in a continuous increase of pressure drop across the filter

  • when a predetermined pressure drop level is achieved the filter is shut down for cleaning

  • The filter media is cleaned by backwash system

  • After backwashing the filter is rinsed with raw water and after the required quality of water is achieved the filter is put back into service

  • Depending on the filtered water quality required backwashing is either done with raw water or with filtered water

 

Product model availability:

 

Activated Carbon filter plants are comprises of:

 

  • Mild Steel/SS /FRP Pressure Vessel

  • Frontal piping wok with manual

  • Automatic multi port valve butterfly valve

  • Conventional valves for easy operation and control

  • Available from 1,000 Liters/hr. to 1,00,0000 Liters/hr

UV Disinfection System

UV Disinfection System

Owing to the dexterous professionals, we have been able to provide the customers with a commendable UV Disinfection System. Capable to cater to the requirements of various industries, these systems are trusted technology and natural purifier.

Other details:

  • UV is a band of invisible light in the electro magnetic spectrum

  • Range 200 – 400 nm wave lengths

  • The UV wave length of 253.7 nm possesses the greatest germicidal effectiveness

  • Penetrates the microorganism cell membrane to destroy the DNA molecules

  • Prevents cell replication

  • UV is used to provide bacterial disinfection in water

  • It does not change the physical or chemical characteristics in water

  • UV provides disinfection on contact. It does not have any residual properties left in the treated water

  • There are no known microorganisms resistant to UV

 

Product flow range:

 

  • 100 LPH to 5, 00,000 LPH

 

Applications:

 

  • Drinking water treatment

  • RO Plants

  • Mineral water plants

  • Sewage water recycling

  • Effluent recycling

  • Municipal water supply

  • Zero liquid discharge systems

Dosing Systems

Dosing Systems

Since inception, we are engaged in catering to the variegated requirements of the customers by bringing forth Dosing Systems. The dosing pumps offered by us are installed with liquid handling material that ensures a very wide chemical compatibility. Work with almost all chemicals used in water treatment plants, these systems have unique double ball valve design and the absence of elastomer in contact with the dosed media.

Application areas:

 

  • Drinking water treatment

  • RO Plants

  • Mineral water plants

  • Sewage water recycling

  • Effluent recycling

  • Municipal water supply

  • Zero liquid discharge systems

  • Water treatment systems

  • Hospitals

  • Swimming Pool

Ozone Generators

Ozone Generators

Owing to the sprawling infrastructure, we have been successful in catering to the variegated requirements of the customers by providing Ozone Generators. Ozone is effective in killing bacteria and the reaction generated by the generator is instantaneous as the gas mixes with water. ozone is formed, when a high voltage electric discharge is passed through air and oxygen ionizes.

Other details:

  • The reaction rate is 3200 times faster than any known Method.

  • The disinfection rate is constant.

  • Ozone can be increased or decreased to any desired levels for effective treatment of water and also destroys bad effects of chlorine

  • Ozone is powerful oxidant

  • It reacts chemically with cells to destroy them

  • Ozonizer is used to create a hygienic environment

 

Ozone is used as an:

  • Ade-odorizer

  • De-colorized

  • Fungicide

  • Bactericide

  • Algaecide

Filter Cartridges

Filter Cartridges

With the thorough knowledge of the varied aspects of the market, we have been able to provide the customers with Filter Cartridges. Effective for removing micron dust particles from water, these cartridges comprise vessel, housing polypropylene cartridge filter elements. Ensures proper filtration of micron dust particles, these systems are utilized in pretreatment of reverse osmosis systems as well as in enhancing life of RO membranes. Available with us in different sizes, these systems are manufactured at par with the industry set guidelines.

 

Sizes in microns (with polypropylene cartridges):

 

  • 0.1

  • 1

  • 2

  • 3

  • 5

  • 10

To,Nectar Solutions

Promote Your Business with IndiaMART
Enter Your Website URL
RELATED COMPANIES