We offer automatic rolling machine, which are suitable for 1mmto 2.5mm cold rolled steel strip and have high production capacity. These are also suitable for production of motorbike wheel rim or all other rolling items. Further, our machine consists of special steel fabricated body mounted on construction MS base platform.

Specifications :

• Platform fabrication with machining and surphase
  
• Made from EN- 8 shaft, EN-24 gear material
  
• Drive consists of 15-20 HP 960 RPM three-phase standard, which makes motor suitably mounted on rails and connected to the machine
  
• Equipped with gearboxes as center 3 ½â€
  
• Shafts are adjustable vertically by control screws, which are provided with hand wheel and lock nut
  
• Incorporated with Denfoss motor drive controller to control the speed of machine as per production

Our in-depth domain knowledge assist us in manufacturing a wide range of rim rolling machine, which are suitable for 1mm to 2.5mm cold rolled steel strip with high production capacity. These are used for manufacturing all kinds of mudguard and rolling items. Further, our machine consists of special steel fabricated body mounted on construction MS base platform.

Specifications :

• Platform fabrication with machining and surphase
  
• Provided with EN- 8 shaft, EN-24 gear material
  
• Drive consists of 15-20 HP 960 RPM three-phase
  
• Motor suitably mounted on rails and connected to the machine
  
• Incorporated with earboxes as center3 ½”
  
• Shafts are adjustable vertically by control screws and provided with hand wheel and lock nut
  
• Denfoss motor drive controller to control the speed of machine as per production
  

The Neeraj Enterprises corrugated sheet rolling machine was specifically designed for bending corrugated materials in steel and aluminum. The design is specific because the requirement was for the machine to bend a corrugated sheet, which has a much larger section modulus (measure of stiffness) than the plane flat sheet. Thus, all the bending rolls have slide blocks at their ends, sliding in guide-ways and are driven in translation with worm and pinion gear boxes. The rotation to the synchronized gear boxes is provided by motors.

Neeraj Enterprises roll forming lines are used for making Rims, Fencing, sections such as “Z” purlin , “C” Channels, Roof Panels,  Fenders and any section as per customers specific requirement . Our roll tools are designed by experts by using latest technology in mould designing as well as in Rolling machine and manufactured with utmost accuracy that guarantees accurate production of section. For section manufacturing which is outstanding in quality and capacity one needs a reliable partner. We at Neeraj Enterprises provide roll forming Section Lines with means of production that has been developed based on operational know how and unchanging quality.

Roll forming is a process that shapes various kinds of sheets by passing the raw material through number of roll passes driven by gear drive system. Our lines employ a series of paired rollers to progressively shape a flat strip of metal into desired contour such as channel, angle or any other desired shape in the process adding rigidity and strength to the metal.

This roll forming lines is wide scope of use in:

• Automobile Industry
• Electrical Engineering
• Building and construction
• Steel furniture

We offer a wide range of hydraulic presses such as    

Hydraulic Deep Drawing Press :

Heavy duty, high performance hydraulic press with die cushion for manufacturing deep drawing components.
 
Hydraulic Punching Press :

These presses are available in C-frame, 4-Pillars, 'H' type designs as per customers' requirements. We also manufacture fully automatic machines which can operate without an operator, these machine are largely used in automobile industries.

Hydraulic Blanking Press :

These presses are used for blanking operations in all kind of sheet material may be aluminum, mild steel or S.S, the tonnage is selected according to the blank size & thickness of the material.

Our extensive domain expertise assist us in manufacturing a wide range of automatic hydraulic demoulding tile press. These tile press are incorporated with rotary type two stations, auto vibration and auto ejection system. All these ensures the efficient functioning of our range at client's end.

Specifications :

• Provided with rubberized molds, peak pressure 110 tons
  
• Incorporated with electrical panel hydraulic power pack and other accessories without compressor
  
• Equipped with mould for 25X25 cm tiles
  

Our range of hydraulic crockery melamine press are used for butt welding of individual rims. These are made from superior graded cast iron, slide and rated 100 K.V.A each one transformer. Further. the rim of our range is pneumatically clamped with two pneumatic cylinders cantilever clamped to special graded copper dies.

Specifications :

• Provided with a transformer, which is made of qualitative silicon lamination and windings are electrolytic copper strip
  
• Welding current is provided by solid electrolytic copper casted secondary connected to welding jigs with the flexible strips
  
• Incorporated with meter indicating neon light of load 4-step tape changing switch input 380/440 volts, 50 H.Z A.C secondary 5-9 volts
  

Neeraj Enterprises construction machines like tile forming machine, brick forming machine, etc, based on the technologies of domestic and foreign like products. The machine takes the advantage of mechanical, electronic and hydraulic integration. Computer core and color liquid crystal touch screen, materials can be fed into the material tank in a uniform way. After pressed by high frequency violation, the concrete may reach high density and strength within minute.

The machine has the advantages of simplified operation, and operation without professional training, high production efficiency, low labor intensity and low consumption. You need only to change the mold for producing, Tiles, bricks of various specifications.

Tile making machine that we offer are available upto 40 ton capacity with stroke of 60mm and daylight of 160mm. These are provided with electrical panel and other accessories.
Further, our range is used to manufacture cement tiles by using molds, which are worked upon manually.

Specifications :

• Dimension of base 18”X18”
  
• Electro-hydraulic pressing operation using solenoid controls, timer controlled operation for uniform pressing, single button operation for pressing
  
• Specially designed hydraulic seals for working under dusty conditions
  
• Hard chrome plated special steel piston, deep forged cylinder and mainly a rigid and robust frame for long life and trouble free operation
  
• Hydraulic tank and the power pack is placed on the top of the frame or separated fitted, which forms an integral part of our machine to ensure maintenance free operation, eliminating the use of cumbersome hose connections
  
• Functions of our machine is controlled by panel
  

We manufacture tube end forming machine used in tube bending and forming. The machine has following features:

• Integrated Machine of Tube-bending And Tube-end Forming
• Changing rotating mould to pressing mould to make the diving process more direct and refine the structure
• The vertical press-bending system makes expanding space greatly
• No clamping needed when bending; the specially-designed exerting device makes it easy to put and take tube, shorten the bending period and improves the efficiency
• Equipped with button control, automatic-select bending angle, bending mould retainer, Collect for no-slip end finishing close to a bend, program card tray, swivel caster, emergent button

Our range of flash butt welding machine are designed to form the rim in circular shape and cut it to desired size. These machine provides flexibility for all kinds of rim by changing rollers and cutting edge.

Features :

• Hydraulic power pack for clamping and cutting of the rim
  
• Maximum line speed of 6 m/min
  
• Change over rollers and cutting die set to accommodate different sizes of rim
  
• Swing operation by pneumatic cylinder
  
• Accuracy in circumference within 2 mm for pneumatic operated and swing
  
• Encoder for length measuring
  
• Manual and automatic modes of operation synchronized by a PLC control
  
• Equipped with pneumatic cylinder