About Us

Our wide range of thermal analyzing systems is widely appreciated by our esteemed clients. These are used for analyzing the thermal properties of the most varied of materials such as Polymers, Organics, Ceramic / Glass / Building Materials, Metals / Alloys and Inorganic material. Our high quality range such as thermal conductivity instruments, refractory testing instruments, etc, finds its application in various areas like Chemical and Pharmaceuticals. Our huge range comprise of the following:

•    Differential Scanning Calorimeter    - DSC
•    Thermo-Microbalance
•    Dynamic Mechanical Analyzer   
•    Refractory Testing
•    Thermal Diffusivity Measurements
•    Thermal Diffusivity and Conductivity - LFA 427
•    Thermal Diffusivity and Conductivity - LFA 457

•    Simultaneous Thermal Analyser STA  
•    Dielectric Analyzer
•    Accelerating Rate Calorimeter
•    Software
•    Horizontal Push rod Dilatometer

These are widely known for their following special features:

•    Low power consumption
•    High in performance
•    Low maintenance
•    User friendly

We have been able to overcome every challenge that has come our way during our illustrious journey. Some of the milestones our group has been able to achieve are as follows:



1952

•    Foundation as department of Gebrüder NETZSCH-Maschinenfabrik
•    Distribution of first DTA

1954

•    Distribution of the first Dilatometer

1959

•    Distribution of the first thermobalance

1962

•    Foundation of NETZSCH-Gerätebau GmbH

1970

•    Distribution of the first TG-DTA
•    Integration of refractoriness testing line

1975

•    Worldwide first STA-MS orifice coupling

1978

•    Development of "hot wire apparatus" for measurements of thermal conductivity of refractories

1984

•    Thermomechanical Analyzer TMA 402

1985

•    Worldwide first STA-MS-Skimmer coupling
•    Vapor pressure analyzer VPA

1986

•    Development of high-temperature-DSC 404

1988

•    Introduction of a separate instruments series for polymers, pharmaceuticals and food ("Serie 200")

1991

•    Specific software pakages for the extended evaluation of  thermoanalytical data
•    (Advanced Software, e.g. Thermokinetics)      -

1992

•    Laser Flash Apparatus (LFA) as a kernel of the instrument series "Thermophysical Properties"      -
•    MS Windows®-Software for measurement data analysis      -

1993

•    Dynamic-mechanical analyzer DMA 242       -
•    Coupling of TG and STA with FTIR:
•    First sale of TG-FTIR-Coupling      -
•    Beginning of cooperation with BRUKER Optik GmbH    

1994

•    Automatic sample changer systems for DSC and TG      
1995

•    Redevelopment of the dilatometer with highest resolution: DIL 402 C

1997

•    Development of the DSC 204 Phoenix® for polymer applications      -
•    Pulse Thermal Analysis (PulseTA®)      -

1998

•    Development of a new DSC 404 C Pegasus® and a new  STA 449 C Jupiter® for high-temperature applications

1999

•    Development of high-pressure DSC 204 HP Phoenix® up to 150 bar      -

2000

•    Development of dilatometer DIL 402 E for temperatures up to 2800°C

 2001

•    Development of DSC with high sensitive microsensor

2002

•    Development of LFA 447 NanoFlash® for measurements of thermal conductivity and thermal diffusivity

2003

•    Cost-effective DTA 404 PC Eos (RT…1550°C)
•    Versatile DSC 204 F1 Phoenix® (-180°C ... 700°C)

2004

•    Vacuum-tight TG 209  F1 Iris® (10°C ... 1000°C)
•    LFA 457 MicroFlash® Laser technique for determination of  thermal diffusivity

2005

•    Cost-efficient starter dilatometer DIL 402 PC for glass- and ceramics industry
•    Pricewise attractive DSC 200 F3 Maia®  especially for quality assurance within the field of polymer industry   

2006

•    Easy-to-use TG 209 F3 Tarsus for quality assurance
•    Dual- and differential dilatometer DIL 402 CD
•    Automatic sample changer (ASC) for F3-Series
•    Photo-extension for DSC 204 F1 Phoenix

2007

•    Innovative Guarded Hot Plate System GHP 456 Titan™ for Determination of Thermal Conductivity of Insulations
•    New Photo-DSC 204 F1 Phoenix® for the analysis of UV curing of light-activated resin systems, adhesives, paints, coatings and dental masses
     
2008

•    New instrument series STA-Jupiter® and DSC-Pegasus® with new modular concept for even more application fields and new standard with regards to accuracy and efficiency
•    New NETZSCH STA 449 F1/F3 Jupiter® - Simultaneous Thermal Analysis Apparatus (TG-DSC)
•    New NETZSCH DSC 404 F1/F3 Pegasus® - High temperature DSC

2009

•    Development of Accelerating Rate Calorimeter (ARC) and Automatic Pressure Tracking Adiabatic Calorimeter (APTAC)

We are an Indian subsidiary of NETZSCH group which manufactures a complete high-precision instrument line for thermal analysis and thermophysical properties measurement and offers world class commercial testing services. The products offered by our group are widely used in the polymer sector, the chemical industry, the areas of inorganic and building materials, and environmental analysis.

A group of more than 25 companies and 2000 employees, it was incepted by the great-grandfather of the present chairman, Mr. Thomas Netzsch. Our group has a robust infrastructure of 85000 square feet in Exton, Pennsylvania, a western suburb of Philadelphia along with a manufacturing facility in USA. The infrastructure of the group comprises laboratories for manufacturing, engineering and testing along with seperate marketing and corporate offices. Moreover, our group also has a wide distribution network which is spread across 30 different countries with more than 60 sales and service centers.

It is equipped with hi-tech facilities to assemble and test the NEMO Progressive cavity Pumps. Moreover, we can also stock spares and basic pumps necessary for service of all customers in the subcontinent. The critical elastomers are all stored in de humidified rooms to give the best shelf life.

Our First-rate software achievements are praised among experts, particularly in the area of evaluation proves our technical expertise and the superiority of our products and services.

Our wide range of thermal analyzing instruments such as thermal conductivity instruments, refractory testing instruments, etc, is widely used for analyzing the thermal properties of the most varied of materials. These material are given below:

•    Polymers
•    Organics
•    Ceramic / Glass / Building Materials
•    Metals / Alloys
•    Inorganic

Our commitment toward complete client satisfaction does not end at providing high quality range of thermal analysis instruments such as thermal conductivity instruments, refractory testing instruments, etc. Apart from the quality products, we also offer our clients with following value added services:

Technical Services

Our industry specific technical services are offered by a highly qualified team of engineers and technocrats.

Various technical services we offer are as follows: 

•    Installation and Commissioning
•    Hotline Service
•    Preventive Maintenance
•    Calibration Service
•    IQ / OQ / PQ
•    On-Site Repairs with Emergency Service for NETZSCH Components
•    Moving Service
•    Technical Information Service
•    Definition and Shipping of Spare Parts
•    Exchange Service

Applications Measurements

Our application measurement services include issues ranging from sample preparation to examination and interpretation of the measurement results. Over 30 different state-of-the-art measuring stations are available. Some of the methods are as follows:

Method	Measurement results	Temperature range	In accordance with the following standards (excerpt)
Differential Scanning Calorimetry (DSC)	Phase transformation temperatures and enthalpies, specific	-180°C ... 1650°C	ASTM C 351, D 3417, D 3418, D 3895, D 4565, E 793, E 794 DIN 51004, 51007, 53765, 65467 DIN EN 728 ISO 10837, 11357, 11409

Our wide range of thermal analysis systems is being widely appreciated by our clients in the domestic and overseas markets. We have left no stone unturned to ensure that our range exceeds the expectations of our esteemed clients. Owing to our high quality range and competitive pricing policy, we have been able to work with companies of high repute in India and overseas.

We offer provide customized solutions for our range to ensure its hassle free and efficient usage.  Moreover we also provide our clients with value added services such as:

•    Technical Service
•    Applications Measurements
•    Training & Seminars
•    Applications Advisory Service

Our wide range of thermal analyzing instruments such as thermal conductivity instruments, refractory testing instruments, etc, is widely used for the following sectors:

 

• Chemical Industry
• Building Industry
• Pharmaceuticals
• Acadamic & High Level Research activities
• Aerospace
• Defence Research
• Materials Research
• Cermamics & Glass
• Cement
• Insulations
• Paints/pigments
• Thermal and environmental safety
  

These instruments can be provided in customized sizes and specifications as per the requirements of the concerned industry.

 

Training & Seminars

We conduct individual training sessions, intensive courses, users’ meetings and special seminars where our qualified trainers with longtime thermal analysis experience share their expertise with our clients. Our training sessions cover aspects like :

•    Qualification of the Measuring Systems
•    Software Validation
•    Calibration Service and Calibration Certificates
•    Re-qualifications 
•    Support in Creating SOPs

Applications Advisory Service :

We assist our clients in attaining complete solutions by selecting the most appropriate measuring method for their application, providing instrument-related recommendations, advising them on measuring parameters and interpreting their measurement data.

Our efforts are directed towards enhancing the quality standards of our thermal analysis systems. We strive hard to make the quality of our thermal analysis systems unmatched so as to provide our clients with full value for money. Our quality inspectors work under a well defined quality paradigm which allows them to inspect our products at every stage of production. Moreover, we have the latest instruments and equipment to ceaselessly test our products on different parameters like: 

•    Dimensional accuracy of the used components
•    Mechanical integrity
•    Low power consumption
•    Performance
•    Design
•    Maintenance

We comply with the recognized worldwide standards in quality certification and process control which is why, our key functional areas of design, development, production, sales and service meet the ISO 9001 International Quality Guidelines.

We have exercised our endeavors to keep our range of thermal analysis systems at pace with the technological developments through our research and development structure. We have the requisite tools and equipment in our research and development wing which is maintained as per the industrial standards. We perform two kinds of research in our premises:

Technical research

We emphasize on enhancing the quality standards of our wide range of thermal analysis systems. Moreover, they also stress to raise the productivity of our infrastructure for optimum utilization of resources. 

Market research

Our market surveyors perform informative market research to correctly gauge the response towards our range. We will also be taking part in Analytical Anacon 2009 (September 29 - October 2nd) Hyderabad to understand varying consumer’s preferences.

We keep our research work and analysis documented so that we can use it for future reference.