Suppliers

Sell Offers

Buy Leads

Tenders

Trade Shows

Company Directory > Building & Construction > Building & Construction Materials >

Nevatia Steels & Alloys Private Limited

Mumbai, Maharashtra

IndiaMART Member Since: 2007
Products [10]
Phone: +(91)-(22)-24944133

HOME

ABOUT US

PRODUCTS & SERVICES

SEND ENQUIRY

Products & Services

Stainless Steel Wires

Cold Heading Quality Wire

Wire suitable for Fastener and Cold Heading applications such as bolts, nuts, screws, rivets, nails, etc. Nevatia Steel's Wire for CHQ is made by choosing selected quality wire rods and special heat treatment process. This enables the production of wire of desired surface and micro-structure necessary for superior products in spite of several stringent conditions.

Characteristics of CHQ Wire

Uniform coated surface
Strict control of chemical composition

Grades : AISI 304 /(L), 316 /(L), 302HQ (XM-7), 304HC, 430, 434, 410, etc.

Specifications

Diameter (mm)	Grade (AISI)	Tolerance	Tensile (N/mm²)	Packing
0.80 - 2.00	304 /(L), 316 /(L)	DIN h9	600 - 750	Coils/ Pay-pack Drums
2.01 & above	304 /(L), 316 /(L)	DIN h9	550 - 700	Coils/ Pattern laid coils
0.80 - 2.00	302HQ, 304HC	DIN h9	500 - 650	Coils/ Pay-pack Drums
2.01 & above	302HQ, 304HC	DIN h9	450 - 630	Coils/ Pattern laid coils
0.80 - 2.00	410, 430, 434	DIN h9	500 - 700	Coils/ Pay-pack Drums
2.01 & above	410, 430, 434	DIN h9	450 - 600	Coils/ Pattern laid coils

Electro-Polish Quality Wire

Wire used for manufacture of fabricated baskets, trays, kitchen appliances and other formed parts. These wires are widely used in the food industry, medical applications, decorative and architectural usage.

Characteristics of Electro-Polish Quality (EPQ) Wire

Nevatia Steel EPQ wire has brilliant mirror bright surface that result in a very
lustrous appearance when electro-polished
Wires are provided with ¼ hard temper, cold drawn finish

Grades : AISI 304 / (L), 316 / (L), etc.

Specifications

Diameter (mm)	Grade (AISI)	Tolerance	Tensile (N/mm²)	Packing
1.40 - 3.00	304 / (L) 316 / (L)	DIN h9	750 - 900	Coils
3.01 & above	304 / (L) 316 / (L)	DIN h9	700 - 850	Coils

Free Cutting Wire

Wires with improved machinability, smooth surface and strict adherence to chemical composition, used for manufacture of shafts, spindles, pinions, screws, bolts etc.

Characteristics of Free Cutting Wire

Bright smooth surface
Addition of 'sulphur' for better machinability
Maximum straightness and cut-to-length

Grades : AISI 303, 416, 420, 430F, etc.

Specifications

Diameter (mm)	Grade (AISI)	Tolerance	Tensile (N/mm²)	Packing
1.60 - 3.00	303	DIN h9	700 - 850	Coils/ Pattern laid coils
3.01 & above	303	DIN h9	650 - 800	Coils/ Cut lengths to order
1.60 - 3.00	416, 420, 430F	DIN h9	600 - 750	Coils/ Pattern laid coils
3.01 & above	416, 420, 430F	DIN h9	550 - 700	Coils/ Cut lengths to order

General Purpose Wire

Nevatia Steel wire for general purpose usage has all types of grades for different applications. Wires are used for the manufacture of staples, pins, balls, chains, wire ropes, conveyer belts, wall ties, screens, filters, scrubbers, hooks, spoke wires, etc.

Characteristics of General Purpose Wire

Surface as per customers requirement (Bright / Matte / Coated Surface)
Wire can be manufactured in any temper subject to end-use

Grades : AISI 302, 304 / (L), 316 / (L), 314, 430, etc.

Specifications
Typical Tensile strength range by Grade & Temper

Size	Temper	Tensile Strength (N/mm²)
	Grade --->	AISI 302	AISI 304	AISI 316	AISI 430
0.004”-0.016” 0.10-0.40 mm	Soft Annealed	750 - 900	700 - 850	700 - 820	-
0.004”-0.016” 0.10-0.40 mm	Full Hard/ Spring	ASTM A313	ASTM A313	ASTM A313	1250 - 1450
0.016”-0.028” 0.41-0.70 mm	Soft Annealed	750 - 880	700 - 800	700 - 800	500 - 650
0.016”-0.028” 0.41-0.70 mm	Full Hard/ Spring	ASTM A313	ASTM A313	ASTM A313	1000 - 1200
0.028”-0.071” 0.71-1.80 mm	Soft Annealed	700 - 850	650 - 780	600 - 750	480 - 600
	¼ Hard	850 - 1000	750 - 950	750 - 900	600 - 800
	½ Hard	1000 - 1200	950 - 100	900 - 1050	-
	¾ Hard	1200 - 1400	1100 - 1400	1050 - 1300	-
	Full Hard/ Spring	ASTM A313	ASTM A313	ASTM A313	800 - 1100
0.071”-0.157” 1.81-4.00 mm	Soft Annealed	680 - 780	650 - 750	600 - 720	450 - 600
	¼ Hard	800 - 950	750 - 900	720 - 850	600 - 750
	½ Hard	950 - 1050	900 - 1000	850 - 1000	750 - 900
	¾ Hard	1050 - 1200	1000 - 1300	1000 - 1300	-
	Full Hard/ Spring	ASTM A313	ASTM A313	ASTM A313	-
0.158”-0.472” 4.01-12.0 mm	Soft Annealed	580 - 700	560 - 700	560 - 700	450 - 600
	¼ Hard	700 - 850	700 - 850	700 - 850	600 - 750
	½ Hard	850 - 950	850 - 950	850 - 950	-
	¾ Hard	950 - 1200	950 - 1200	950 - 1200	-
	Full Hard/ Spring	ASTM A313	ASTM A313	ASTM A313	-

Redraw Wire

Nevatia Steel wires are also used for further redrawing into finer wires.

Characteristics of Redraw Wire

Clean, matte surface
Soft wire suitable for drawing into fine diameters
High coil weights in drums or on carriers for minimum change-over

Grades : AISI 302, 304 /(L), 316 /(L), 316 Ti, 314, 321, 430 (L), 434A, etc.

Specifications

Diameter (mm)	Grade (AISI)	Tolerance (mm)	Tensile (N/mm²)	Packing
0.60 - 2.00	300 series	+/- 0.015	650 - 800	Coils/ Pay-pack Drums
2.01 & above	300 series	+/- 0.020	600 - 750	Coils/ Pattern laid coils
0.60 - 2.00	400 series	+/- 0.015	500 - 650	Coils/ Pay-pack Drums
2.01 & above	400 series	+/- 0.020	450 - 600	Coils/ Pattern laid coils

Spring Wire

Nevatia Steel Spring Wire is manufactured with excellent mechanical properties for uniformity in spring forming. Our Spring Wire is processed under strict quality control with close adherence to the Cast and Helix of the wire and suitable surface finish (Bright / coated).

Characteristics of Spring Wire

Consistent tensile strength
Bright surface / coated surface
Controlled Cast and Helix

Grades : AISI 302, 304, 316, etc.

Specifications

Diameter (mm)	Grade (AISI)	Tolerance (mm)	Tensile	Packaging	Surface Finish
0.10 - 0.30	302 304 316	+/- 0.006	ASTM A313 / JIS G4314 / DIN 17440/ IS 4454	DIN 160/ 200/ 250	Bright, light oil
0.31 - 1.00		+/- 0.008		DIN 200/ 250/ Coils	Bright, light oil
0.45 - 0.60		+/- 0.010		DIN 355/ W ooden Reel / Coils	Stearate Coated
0.61 - 1.60		+/- 0.015
1.61 - 3.00		+/- 0.020
3.01 & above		+/- 0.025		Coils

Weaving Wire

Wire suitable for Braiding, Knitting & Weaving applications mainly used in mesh manufacturing, automotive, printing and filter Industries.

Characteristics of Weaving Wire

Shiny surface condition
Controlled mechanical properties w.r.t. individual application
High resistance to corrosion

Grades :AISI 304 /(L), 316/ (L), 316 Ti, 310, 314, 321, etc.

Specifications

Diameter (mm)	Tolerance (mm)	Tensile (N/mm	Packaging and Spool type
0.100 - 0.250	+/- 0.004	850 max	DIN 125/ 160/ 200/ US200 (NS10)
0.260 - 0.400	+/- 0.005	830 max	DIN 200/ 250/ US200 (NS10)/ US 250
0.410 - 0.630	+/- 0.007	800 max	DIN 250/ US250/ DIN355
0.635 - 0.800	+/- 0.009	780 max	DIN 355/ Pay-pack Drums/ Coils

Welding Wire

Wire suitable for stainless welding and for cryogenic applications.

Characteristics of Welding Wire

Bright surface
Strict control of chemical composition
High class welding, wetting and feeding characteristics
Corrosion resistance

Grades : ER304 (L), ER308 (L) (Si), ER309 (L) (Si), ER310, ER316 (L) (Si), etc.

Specifications

Diameter (mm)	Grade	Tolerance (mm)	Tensile (N/mm²)	Packing
0.80- 1.60	300 Series	+/-0.015	800 - 1000	SD-300 Spool/ Coils
1.61 & above	300 Series	+/-0.020	750 - 950	Coils/Pattern laid coils