NewAge Industries
NewAge Industries




Home

Profile

Products

Contact Us



Showcase Gallery

Home » Products » Fire Fighting Monitor


Fire Fighting Monitor

With the support of our well equipped manufacturing unit, we are designing and developing a wide range of fire fighting accessories like fire fighting equipment, clothing and others. Available in different specifications, our range can also be customized as per the specific requirement of our clients.

Water Cum Foam Monitor

Item Code: M-LRHV

HIGH VOLUME LONG RANGE FIXED GEAR TYPE WATER  / WATER CUM FOAM MONITOR:
 

  • Monitor (100 /150 NB) made out of ASA 106 Gr. B (C.S.) – Seamless pipe, hot dip galvanized
  • 100 /150  NB flanged Inlet drilled as per ANSI B 16.5 Class 150
  • Gunmetal (IS:318 LTB2) Swivel Joints with worm & worm Gear for Horizontal & Vertical movement
  • Permitting of 360 degrees horizontal & +90 to -45  degrees vertical rotation
  • Jet cum Spray Pattern nozzle made of Aluminum Alloy  / Aqua foam nozzle with foam pick up tube
  • Suitable for a discharge of 3500 / 7500 LPM at 7 kg/cm2
  • Horizontal throw of 60 / 80 meters at 30° angle & in 75 meter for foam at 30° angle still air condition
  • Confirming to IS: 8442 requirements (i.e. As per IS:8442)




Water Cum Foam Monitor




Remote Controlled Monitor

We offer best quality Remote Controlled Monitor.

  • Electrically operated remote control Monitor consists of Stainless Steel/ Bronze Water ways
  • geared swivel joints with suitable geared 230V- Single phase Motor for horizontal and vertical movements
  • 12V DC linear actuator for nozzles Jet Spray mode. Suitable control panel with individual joysticks for Horizontal
  • Vertical and nozzle movements
  • Cabelling from Motors up to Junction Box provided and from Junction box to control Panel shall be optional
  • Automatic overload trips for Motors, limit switches protection for linear actuators and input protection
  • Aluminium alloy hard anodized jet spray nozzle as per required capacity
  • Base Flanges shall have dimensions as per ANSI-B-16.5 – 150 # F/F
  • Rotation up to 340º and elevation – 45º to +90º

 
MONITOR 80mm 100mm 150mm
Flow Cap @ 7Kg/cm² 1800 to 3000 lpm 3000 – 5000 lpm 5000 – 9000 lpm
Horizontal Water Throw @30º and at 7kg/cm² 58 – 65 Mtr 68 – 80 Mtr 82 – 100 Mtr




Remote Controlled Monitor



Portable Oscillating Monitor

Item Code: R-Ranger

We, NewAge Industries is one of the leading manufacturer of Portable Oscillating Monitor.

The portable oscillating monitor made out of aluminum (light weight construction) will confirm to the following technical specifications:

  • The flow of the monitor will be not less than 1800 LPM @ 7 bar
  • The monitor will be equipped with a Nozzle having maximum flow of 1800 LPM @ 7 bar
  • It will have a rotation capability of 360° in Horizontal and 80° in Vertical  when being used as a Ground Monitor
  • It will have a carrying handle on top to carry the monitor in folded condition
  • It will have stainless steel foldable legs with carbide tips to ensure full stability during operation
  • It will have a 2.5” Size double swivel inlet which locking mechanism for mounting and locking the oscillating attachment
  • The unit will be equipped with a vertical stop pull pin to limit its vertical movement to 30° for safety reasons. The vertical movement beyond 30° will be possible by pulling the vertical stop pull pin
  • The unit will be equipped with a pressure gauge and will be powder coated in RED
  • The unit will have screw locks to lock the horizontal as well as vertical movement of the unit




Portable Oscillating Monitor



Super-Jet Water Monitor

Item Code: M-WJM

We offer best quality Super-Jet Water Monitor

Silent featues of our Super Jet Water Monitor:

  • Monitor (63 / 75 /100 mm size) made out of ASA 106 Gr. B (C.S.) – Seamless pipe, hot dip galvanized
  • 75 /100 mm N.B. flanged inlet, Flange Dimension: OD 200mm, PCD 160mm, four 19mdia holes
  • Gunmetal(IS:318  LTB2) swivel joints & S.S ball bearing with brass locking arrangement
  • Permitting of 360 degrees horizontal, 80 to -45 degrees vertical traverse
  • 32 /38 mm bore JET Nozzle made of Aluminum alloy with threaded inlet suitable for a discharge of 1750 /2580 /3500 LPM at 7kg/cm2 pressure
  • Having Horizontal throw of 53mtr. at 30 deg. angle in still air condition
  • Bearing IS:8442 mark




Super-Jet Water Monitor




Standpost Mounted Oscillating Monitor

Item Code: M-OM

We manufacture best quality Standpost Mounted Oscillating Monitor with below features:

  • Oscillating Monitor – Stand Post Type, water powered, oscillating mechanism made of GM,
  • Monitor made out of seamless steel tubes, hot dip galvanized GM swivel joints with locking arrangements, permitting automatic adjustable ARC from 0-190 degree and manual 0-360 degree rotation.

  • +80 to -45 degree manual vertical movement. Oscillating speed adjustable between 0-80 degree per second.

  • 32 mm bore GM Nozzle suitable for a discharge of 2580 lpm at 7 kg/cm2 pressure, 55 mtr horizontal throw in still air conf. to IS 8442.




Standpost Mounted Oscillating Monitor




Trolley Mounted Water cum Foam Monitor

Item Code: M-TMM

We manufacture best quality Trolley Mounted Water cum Foam Monitor

  • Monitor made out of ASA 106 Gr. B (C.S.) – Seamless pipe, hot dip galvanized
  • Gunmetal (IS:318 LTB2) Swivel Joints & S.S ball bearing with brass locking  arrangement
  • Mounted on a Rubber tyred Trolley with supporting legs, having two /three/four  63mm gunmetal  male  instantaneous inlets with  non- return  valves
  • Permitting of 360 degrees  horizontal, 80 to -45 degrees vertical traverse
  • Complete with FOAM BARREL type Nozzle made of Aluminum Alloy suitable for discharge of water Cap. 1750 /2580/3500 LPM at 7kg/cm2 pressure
  • Having horizontal throw of 53 / 60 /64mtrs for water and 46mtrs for foam in still air condition
  • Monitor Bearing IS: 8442 mark




Trolley Mounted Water cum Foam Monitor




Portable Water cum Foam Monitor

Item Code: M-Commando

Features of Portable Water cum Foam Monitor "Commando" are:


  • Multiple usage type Portable Ground cum Deck type lightweight monitor suitable for ground operation, and for mounting directly on stand post flange
  • Monitor should be detachable in two pieces, made of aluminium alloy (hard anodized)
  • Turbulence free waterways S.S. ball bearing swivel joint, having positive locking arrangements permitting 240 deg
  • Horizontal rotation and + 30 deg. to + 90 deg
  • Vertical traverse from ground level with lock pin for additional safety against lifting of monitor from ground while vertical traverse, having two 63mm male inst. 
  • Inlet fitted with jet and spray nozzle with stream straighter and spring control automatic arrangement
  • Suitable for discharge of Minimum 2400 LPM  at 7kg/cm2 pressure
  • 45 mtrs horizontal throw at 35 degree angle in still air
  • Self closing safety valve for ground stability
  • Mounted on folding stainless steel legs, automatic drain facility. Monitor’s weight will not exceed 30 Kgs with nozzle




Portable Water cum Foam Monitor



Water Portable Oscillating Monitor

The flow of the monitor will be not less than 1800 LPM @ 7 bar. The monitor will be equipped with a Nozzle having maximum flow of 1800 LPM @ 7 bar. It will have a rotation capability of 360 in Horizontal and 80 in Vertical when being used as a Ground Monitor. It will have a carrying handle on top to carry the monitor in folded condition. It will have stainless steel foldable legs with carbide tips to ensure full stability during operation. It will have a 2.5” Size double swivel inlet which locking mechanism for mounting and locking the oscillating attachment. The unit will be equipped with a vertical stop pull pin to limit its vertical movement to 30 for safety reasons. The vertical movement beyond 30 will be possible by pulling the vertical stop pull pin. The unit will be equipped with a pressure gauge and will be powder coated in RED. The unit will have screw locks to lock the horizontal as well as vertical movement of the unit.




Water Portable Oscillating Monitor



Fixed Water Monitor

  • We manufacture, export, and supply Fixed Water Monitor made out of ASA 106 Gr. B (C.S.). The Fixed Water Monitor offered by us has Seamless pipe and is hot dip galvanized product. Our Fixed Water Monitor is a quality product bearing IS: 8442 mark.

  • Salient Feature

    Monitor (63 / 75 /100 mm size) made out of ASA 106 Gr. B (C.S.)75 /100 mm N.B. flanged inlet, Flange Dimension: OD 200mm, PCD 160mm, four 19mdia holes Gunmetal(IS:318 LTB2) swivel joints & S.S ball bearing with brass locking arrangement,Permitting of 360 degrees horizontal, 80 to -45 degrees vertical traverse,32 /38 mm bore JET Nozzle made of Aluminum alloy with threaded inlet suitable for a discharge of 1750 /2580 /3500 LPM at 7kg/cm2 pressure,Having Horizontal throw of 53mtr. at 30 deg. angle in still air condition




Fixed Water Monitor



Water Jet Monitor

Water monitor, standpost type with jet nozzle, made out of IS: 1239 seamless steel tubes, hot dip galvanized, 63mm /75mm / 100mm N.B. flanged inlet, IS:318 LTB2 gunmetal ball bearing swivel joints with brass locking arrangement, permitting of 360 degree horizontal, 80 to –45 degrees vertical traverse, 32mm bore Aluminum Alloy - with Jet Nozzle with male threaded inlet suitable for a discharge of 1750 / 2580 / 3500 l.pm. at 7kg/cm2 pressure, 53m horizontal throw at 30 deg. Angle in still air, bearing IS:8442 mark. 
(Flange ANSI B-16.5 class 150)




Water Jet Monitor












Contact Us
NewAge Industries
Ms. Sujal Shah (Director)
Ambawadi Industrial Estate, Surendranagar
Wadhwan - 363002, Gujarat, India

Contact via E-mail



Home  |  Profile  |  Products  |  Site Navigation  |  Contact Us

Member IndiaMART.com © NewAge Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited