* Length of Bed : 755 mm * Height of Centre : 115 mm * Swing of Saddle : 135 mm * Swing over Bed : 215 mm * Admit Between Centre : 300 mm * Width of Bed : 140 mm * Spindle Bore : 12 mm
STANDARD ACCESSORIES:-
* Flame Hardened Bed * Electric Motor * True Chuck * Gear Set * Chuck Plate * Dead Centres * Tool Post Key * R/F Switch * V-Belt
OPTIONAL ACCESSORIES:-
* Fabricated Cupboard * Revolving Centre MT-2
NOTE:- Illustrations and Specifications are not binding in detail and subject to modification and improvement without notice.
SALIENT FEATURES : Head Stock Gear Helical Head Stock / Counter pulley dynamically balanced All Components machined using jigs and fixtures to close tolerances, thus providing easy interchangeability The main spindle is supported on anti - friction taper roller bearing (SKF) Steel parts made from EN-8 steel Rotating parts are made from closed grain cast iron Flame Hardened and Ground Bed for minimum wear Apron is fully oil bath & needs minimum care and low maintenance Wide variety of optional accessories for higher productivity Tested as per IS: 1878-1971
STANDARD ACCESSORIES : Flame Hardened Bed Steady Rest Follow Rest Norton Gear Box Chuck Plate Motor Pulley Tool Post Key Dead Centers MT-3 Spindle Sleeve V-Belts (A-37) Spare Parts & Instruction Manual
EXTRA ACCESSORIES : Electric Motor Dog / Through Chuck Taper Attachment Splash Guard Rear Tool Post Coolant pump with Tank & Nozzle Face Plate Hydraulic Copy Turning Attachment
STANDARD ACCESSORIES : Flame hardened and ground bed Change Gear Set (Inch & MM) Chuck Plate Tool Post Key Centre Adaptor Dead Centers Motor Pulley Four Position Tool Post Spare Parts & Instruction Manual
EXTRA ACCESSORIES : Norton Gear Box Norton Gear Box with Feed Shaft Dog or True Chuck Electric Motor & V-Belt Coolant Pump with Tank & Nozzle Quick Change Tools Post / Rear Tool Post Taper Turning Attachment Reverse - Forward Switch Steady Rest Follow Rest Face Plate
STANDARD ACCESSORIES : Flame hardened and ground bed Change Gear Set (Inch & MM) Chuck Plate Tool Post Key Centre Adaptor Dead Centers Motor Pulley Four Position Tool Post Spare Parts & Instruction Manual
EXTRA ACCESSORIES : Norton Gear Box Norton Gear Box with Feed Shaft Dog or True Chuck Electric Motor & V-Belt Coolant Pump with Tank & Nozzle Quick Change Tools Post / Rear Tool Post Taper Turning Attachment Reverse - Forward Switch Steady Rest Follow Rest Face Plate
SALIENT FEATURES : Flame hardened and ground bed for minimum wear The main spindle is supported on anti-friction taper roller bearing (SKF) Head Stock / Counter pulley dynamically balanced Rotating parts are made from 25 grade cast iron Steel parts made from EN-8 steel All components machined using jigs and fixtures to close tolerances, thus providing easy interchangeability Wide variety of optional accessories for higher productivity Tested as per IS: 1878-1971
STANDARD ACCESSORIES : Flame Hardened Bed Change Gear Set Motor Pulley Chuck Plate Spindle Sleeve Dead Centers Tool Post Key Spare Parts & Instruction Manual
OPTIONAL ACCESSORIES : Steady Rest Follow Rest Face Plate Rear Tool Post Quick Change Tools Post Milling Attachment Coolant Pump With Tank & Adjustable Nozzle Taper Turning Attachment Norton Gear Box or 4 Speed Semi Norton Gear Box with Feed Shaft Electric Motor Dog / True Chuck Machine Lamp Splash Guard 3 Way Indexing Carriage Stopper
SALIENT FEATURES : Flame hardened and ground bed for minimum wear The main spindle is supported on anti-friction taper roller bearing (SKF) Head Stock / Counter pulley dynamically balanced Rotating parts are made from 25 Grade cast iron Steel parts made from EN-8 steel All components machined using jigs and fixtures to close tolerances, thus providing easy interchangeability Wide variety of optional accessories for higher productivity Tested as per IS: 1878-1971
STANDARD ACCESSORIES : Flame hardened and ground bed 4 Speed Semi Norton Gear Box with Feed Shaft Change Gear Set Motor Pulley Chuck Plate Spindle Sleeve Dead Centers Tool Post Key Spare Parts & Instruction Manual
OPTIONAL ACCESSORIES : Steady Rest Follow Rest Face Plate Rear Tool Post Quick Change Tool Post Milling Attachment Coolant Pump with tank & Adjustable Nozzle Taper Turning Attachment Dog / True Chuck Machine Lamp Splash Guard 3 Way Indexing Carriage Stopper Electric Motor
* Height of Centre : 175 mm * Swing Over Saddle : 225 mm * Admit Between Centre : 900 mm * Swing Over Bed : 320 mm * Length of Bed : 1616 mm * Width of Bed : 250 mm * Spindle Bore : 45 mm
SPECIAL FEATURES:-
* Head Stock Gear Helical * Head Stock /Counter pulley dynamically balanced * All components machines using jigs & fixtures to close tolerances, thus providing easy interchangeability * The main Spindle is supported on anti-friction taper roller bearing (SKF) * Steel parts made from EN-8 steel * Rotating parts are made from 25 grade cast iron * Flame Hardened & ground bed for minimum wear * Apron is fully oil bath & needs minimum care and low maintenance. * Wide variety of optional accessories for higher productivity * Tested as per IS-1878-1971
STANDARD ACCESSORIES:-
* Steady Rest * Follow Rest * Norton Gear Box * Flame Hardened Bed * Chuck Plate * Motor Pulley * Spindle Sleeve * Dead Centres * Tool Post key * Spare parts & Instruction Book
OPTIONAL ACCESSORIES:-
* Face Plate * Rear Tool Post * Coolant Pump with Tank & Adj. Nozzle * Taper Turning Attachment * Dog & True Chuck * Splash Guard * Electric Motor * Hydraulic Copy Turning Attachment
NOTE:- Illustrations and Specifications are not binding in detail and subject to modification and improvement without notice.
Height of Centre Over Flat Bed Ways : 380 mm Swing Over Bed : 710 mm Length of Gap in Front of Face Plate : 190 mm Width of Bed : 380 mm Spindle Bore : 80 mm
SPECIAL FEATURES
* Head stock gear helical. * Main spindle & tailstock spindle hardened & ground. * Head Stock / Counter Pulley dynamically balanced * Apron is fully oil bath. * Steel parts made from EN-8 steel * Needs minimum care and low machine cost. * Tested as per IS : 1878 – 1971. Extra Accessories :
SALIENT FEATURES : Head Stock Gear Helical Main Spindle & Tailstock Spindle hardened & ground Head Stock / Counter pulley dynamically balanced Hardened and Ground Bed for minimum wear Apron is fully oil bath Steel parts made from EN-8 steel Needs minimum care and low maintenance Tested as Per IS: 1878 - 1971 All components machined using jigs and fixtures to close to tolerances, thus providing easy interchangeability
STANDARD ACCESSORIES : Flame Hardened & Ground Bed Chuck Plate Face Plate Motor Pulley Tool Post Key Dead Centers MT-4 Spindle Sleeve Set of Change Gears (Inch & Metric Threads) Steady Rest Follow Rest Nylon Flat Belt Oil Can Spare Parts & Instruction Manual
OPTIONAL ACCESSORIES : Taper Turning Attachment (For Model : HT-1, 2, 3, 4 Only) Norton Gear Box 4 Speed Semi Norton Gear Box with Feed Shaft Extra Height of Centre (12") Spindle Bore : Dia. 75mm or 100mm Coolant Pump with Tank & Adjustable Nozzles Splash Guard Turcite - B Coating Guideway Quick Change Tool Post Revolving / Pipe Centre Electric Motor Through / Dog Chuck Carrier Plate Hydraulic Copy Turning Attachment
* Height of Centre: 254 mm * Swing Over Bed : 480 mm * Swing Over Cross Slide : 290 mm * Swing in Gap : 785 mm * Length of Gap in front of Face Plate : 190 mm * Width of Bed : 325 mm * Bed Type : 2 V & 2 FLAT * Spindle Bore : 52 mm
Salient Features:
Head Stock Gear Helical Main Spindle & Tailstock Spindle hardened & ground Head Stock / Counter pulley dynamically balanced Hardened and Ground Bed for minimum wear Apron is fully oil bath Steel parts made from EN-8 steel Needs minimum care and low maintenance Tested as Per IS: 1878 - 1971 All components machined using jigs and fixtures to close to tolerances, thus providing easy interchangeability
Standard Accessories : Flame Hardened & Ground Bed Chuck Plate Face Plate Motor Pulley Tool Post Key Dead Centers MT-4 Spindle Sleeve Set of Change Gears (Inch & Metric Threads) Steady Rest Follow Rest Nylon Flat Belt Oil Can Spare Parts & Instruction Manual
Optional Accessories : Taper Turning Attachment (For Model : HT-1, 2, 3, 4 Only) Norton Gear Box 4 Speed Semi Norton Gear Box with Feed Shaft Extra Height of Centre (12") Spindle Bore : Dia. 75mm or 100mm Coolant Pump with Tank & Adjustable Nozzles Splash Guard Turcite - B Coating Guideway Quick Change Tool Post Revolving / Pipe Centre Electric Motor Through / Dog Chuck Carrier Plate Hydraulic Copy Turning Attachment
NOTE:- Illustrations and Specifications are not binding in detail and subject to modification and improvement without notice.
BED LENGTH : 7' TO 26' HEIGHT OF CENTRE : 16" TO 24" WIDTH OF BED : 18" TO 26" SPINDLE BORE : 3" TO 5"
Standard Accessories : Flame Hardened & Ground Bed Chuck Plate Change Gear Set (Inch / MM) 2 Dead Centers Centre Adaptor Tool Post Key Nylon Belt V-Belt Set Motor Pulley Steady Rest Follow Rest Oil Can Spare Parts & Instruction Manual Extra Accessories : Norton Gear Box (Inch & MM) Rear Tool Post with Long Slide Extra Spindle Bore Ø4" & Ø5" Extra Height of Centre Coolant Pump With Tank & Adjustable Nozzle Extra Chuck Plate Turcite - B Coating Slide Way True / Dog Chuck Reverse - Forward Switch V-Belt Set Electric Motor
NOTE: Illustrations and specifications are not binding in detail and are subject to modification and improvement without notice.
* Single piece, “L” shaped, twist resisting Main Base Casting ensuring maximum rigidity & vibration damping.
* Unique raised Guideway type Bed design for the ultimate balanced load carrying capacity.
* World best & proven-make Spindle bearings for long life & high accuracy.
* Design structure made for optimum chip & coolant disposal.
* Maximum rapid traverse rate of 30 mpm inducing minimum non-cutting time.
* Larger size C3 Class Ballscrews & heavy duty Guideways imparting the best structural stiffness.
* Roller bearing mounted vertical Tailstock over hardened and ground slideways for easiest movement & approach.
* Hydraulic Disc-brake over Spindle for improving productivity as well as belt-life (Optional).
STANDARD FEATURES : L. M. Guideways 8 Station Bidirectional Electro-Mechanical Turret Auto & Manual Coolant System Centralized & Programmable Lubrication Tailstock with live center Hydraulic Chucking 8 Turning Tool Holders 4 Boring Bar Holders 2 Facing Tool Holders FANUC CNC Control System (Series 0i-Mate TC)
OPTIONAL FEATURES : Siemens CNC Control System (Series 802D) Hydraulic Disk Brake for Spindle Servo Turret Chip Conveyor Bar Feeder Three phase Servo voltage Stabilizer
Prime Precision Manufacturing and supplying CNC machined component such as industrial CNC machined components, customized CNC machined components and precision CNC machined components.
Dilip Industrial Corporation Supplier and manufacturer of lathe machines such as heavy duty lathe machines, CNC cutting machines, electric cutting machines, medium duty lathe machines, light duty lathe machines and CNC profile cutting machines.
Processing...
