NI3 EngineeringNI3 Engineering


Our Products










Home » Our Products » Engineering Models

Engineering Models



ACTUAL CUT SECTIONAL MODEL OF TRUCK CHASSIS

ACTUAL CUT SECTIONAL MODEL OF  TRUCK CHASSIS


ACTUAL CUT SECTIONAL MODEL OF TRUCK CHASSIS

01.  We Can Provide Correct Cut Sectionals as per requirement.

02.  Cylinder Block:-  We provide 3 Cylinders Cut Section So trainees can understand correct location of respective Pistons. Also it is easy to See oil Gallery and water Galleries in the Block

03.  Cylinder Head :- We Provide all four Cut section of all four Combustion chambers so trainee easily understand witch Stroke take place in Respective Cylinder and with working Of valves. Its Useful for the demonstration of the Cooling and Lubrication System.

04.   Crank Case:- We Provide cut Section of Crank case so trainees understand working of Crank Shaft, and also understand location of oil pump, strainer .

05.  Oil Pump:- We provide Cut Section Of Oil Pump Housing So trainees easily understand Type, Construction and working of Oil Pump in the Engine.

06.  Fuel Supply System:- We Provide Actual Cut Sectional Fuel Tank in the stand of engine So Trainees Easily understand the fuel Supply System  of car and location of Fuel Pump & fuel Gauge and its wiring Circuits.

07.  Cooling System: - We Provide Actual Cut of Water pump, Jackets Thermostat valves So trainee easily understand Type, Construction, Location & Working of Cooling System.

08.   Air Intake System: - We Provide Actual Cut Model of Air Cleaner and turbo charger for demonstration of type Construction & working of air Cleaner.  Also Trainees can understand locations and Construction of Intake air System.

09.  Exhaust Systems:- We provide Actual Cut  Of Exhaust Manifold. ( Mufflers and catalytic converter if provide by your side)

10.  Engine/Chassis Drive:- Engine is Driven by Single phase motor Driven  Crompton make with worm gear reduction and V belt drive RPM of Engine is as required.

11.Clutch:- Actual cut section of bail housing for understanding working of clutch.

12. Gear Box:- Actual cut section of Gear box housing for understanding of Gear box working and gear shifting.

13. Transmission:- As actual with multi colour painting.

14. Final Drive/Rear Axle:- Actual cut section of housing and wheel hub single side

15.   Colour:- Stand will be power coated other all the parts will be colored with different colours.





Diesel Engine Working Model

Diesel Engine Working Model


Four cylinder diesel engine peugeot type (mahindra jeep)

1. Old reconditioned engine with fully overhauled and piston and piston rings are new along with bearing set.

2. All other accessories are new such as Radiator, Battery, Wiring, Switches.

3. Engine Mounted with all accessories.

4. All vibration mounting are used in engine for proper mounting and less vibration.

5. Engine mounted on MS square pipe power coated stand with 2.5feet high.

6. Engine mounting stand should be trolley type with movable caster wheels.

7. Dash board is fitted with fuel gauge, temperature gauge, and proper switch board.

8. Exhaust System of engine along with catalytic convertor and silencer muffler for fit in PUC Terms.

9. Air filter fitted with engine for greater life of Engine.

10. Engine with 12 Month warranty.

11. Battery is standard Exide make with 12 months manufacturer warranty.

12. Fuel tank with 5 liters capacity with tank unit fitted for fuel gauge.





Educational car chassis Petrol

Educational car chassis Petrol


Specifications:-

1. Cut Section of Cylinder Block For Better View of Piston Displacement. And Better View Of Water Jackets.     2. Cut Section of Cylinder Head For view of Valve working it’s easy to understand valve timing diagram.

3. Cut Section of Timing Gear cover for Understand camshaft and Belt drive mechanism of overhead camshaft.

4. Cut Section Of Oil Sump For better view of crank case and Crankshaft.

5. Cut Section of Tappet Cover For Better View Of Rocker Arm Assembly.

6. Cut Section of Timing Cover.

7. Cut Section Of Oil Pump and Fuel  pump For Understand their Respective Work.

8. Chassis mounted on Heavy Duty 1.5inch Square MS Pipe with power Coated.

9. Cut Section Of Bail Housing of Gear Box for better view of Clutch Working.

10. Actual cut section of Synchromesh Gear Box for better view of gear Box working and gear Ratio Calculations.

11. Actual cut section of differential (Rear Axle) for better view of Differential working and Rear Axle working.

12. Engine with Slandered Motor Kirloskar, croutons, etc single face.






Oxy- Acetylene Gas Cylinder Trolley

Oxy- Acetylene Gas Cylinder Trolley


Industrial heavy duty Oxy- cylinder trolley.





Contact Us
NI3 Engineering
Mr. Nanaso Mane (Assistant General Manager)
Plot No. 251, Road No. 2, Behind Bima Complex, Kalamboli Steel Market, Kalamboli
Navi Mumbai - 410218, Maharashtra, India

Contact via E-mail

Home  |  Profile  |  Our Products   |  Site Navigation  |  Contact Us

Member IndiaMART.com © NI3 Engineering. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited