We manufacture and export nice 5000 RP - Neonatal Intensive Open Care System which is designed for use in the nursery, labour & delivery. It provides little patients the best possible care. Salient attributes of the equipment are as follows:

• A Micro-processor controlled Infant warming system with Resuscitation and Halogen Phototherapy.
• Four modes of operation: Pre-warm, Manual, Skin and Air.
• Provides optimal resuscitation with safe and controlled Peak inspiratory pressure (PIP) and a consistent and precise PEEP
• Built-in Halogen Phototherapy with timer cut off.
• Smooth bed tilt can be adjusted between 30 ° Down / Up.
• The Warmer Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby.
• Feather Touch operation with large digital display and comprehensive alarms.
• Dual Thermistor Temperature Probes for Air and Skin Probes.
• Built-in Infant Weighing Scale (Optional)
• Motorized working Height Adjustment (Optional)
• Trend Facility, Apgar Timer, Phototherapy Timer and Real Time.
• Memory Backup, Rigid IV Pole, Monitor Stand
• 5" Anti Static Castors

nice 3010H – Neonatal / Infant Incubators with Working Height Adjustment is one of our specially designed and developed products. These are built to embody precision, reliability and convenience. Its characteristics include:

• Micro-processor controlled with simultaneous display of Skin, Air and Set Temperatures.
• Thermistor based Dual Sensor Technique for both Air / Skin Modes.
• Memory Backup restores set temperature and control mode automatically, in the event of power failure.
• The centrifugal blower operation ensures fresh air for the infant, always.
• The withdrawable baby tray gives unimpeded access to the new born.
• The Electrical Adjustment of working height ensures convenient care of the new born.
• The unit has a built-in Humidity Control Chamber and integrated O2 Flow Meter.
• The baby bed is tiltable at both sides, Head up and down, with externally operated trendle and flower positioning.
• The single mould elbow operated ports allows easy access and eliminates cross infections.
• Accessories include Built-in Observation Light, IV Stand, Monitor Shelf, X-Ray scaling and catheter measuring scale and Imported rust free antistatic castors.
• Optional Features: Double Wall Canopy / Built-in Weighing Scale

nice ORCHID 3000 Transport Baby Incubator comes with collapsible stand and is comparable to any international Equipment. Its salient features include:

• Microprocessor Controlled System with Air and Skin Modes of operation.
• Displays Air / Skin Temperature simultaneously with Set temperature.
• Feather Touch operation with large digital display and comprehensive alarms.
• Memory backup to restore set temperature and control mode automatically in the event of power failure.
• An integral and withdrawable baby tray to aid resuscitation during transport.
• An integral Humidifier.
• Internal battery Backup for 4 hours minimum. Operates both on AC and DC currents, with visual indication for battery power status and power sources.
• Collapsible stainless steel stand with shock absorbers.
• Dual Thermistor Temperature Probes, with accuracy of /- 0.2 °C, to minimize down time and ensure accuracy. Probe interchangeable without calibration.
• A, 2D (or) 2E tank mounting facility to mount gas cylinders.
• Unimpeded access to the patient with frontal access and a minimum of 2 access ports and three elbow operated ports.
• Easy to clean and disinfect
• High Intensity CFL Light for observation.
• Comprehensive alarms: Air Temp. Low / High, Skin Temp. Low / High, Sensor Failure, Low Battery, Heater Failure, Power Failure, Air Flow Failure, Temperature > 39 ° C, O2 Flow failure (optional).
• Heater should automatically cut off if air / skin temperature inside the incubator exceeds 39° C.
• Set Temperature Range: Air – 20 ° C to 39° C, Skin – 30 ° C to 38.3° C.
• O2 Driven Venturi Slow Suction with humidified O2.
• A type cylinder, aluminium, Pressure Regulator Assembly, IV Stand Facility.
• Accessories: Auxiliary Tray Shelf for other placing additional equipment.

nice 2010 BC – Neonatal / Infant Radiant Warmers is micro processor controlled with servo & manual modes of operation. It provides automatic over heat and over temperature protection in both manual and servo modes. Some of its features include:

• Quartz Infrared heater element with very effective heat Radiation.
• Thermistor based high sensitive Temperature Probe ensures an accuracy of /- 0.2 °C. Probe is inter-changeable without calibration.
• The Parabolic Reflector is designed to send uniform heat to the bed surface.
• Memory Backup to restore set temperature and previous mode, in case of power failure.
• An integral Bed with up-down tilting facility and an external linear tilting mechanism ensures the baby is not disturbed, while tilting the bed.
• Swiveling Capacity of the Heater Unit and the X-Ray Cassette fitted under the baby mattress, ensures the baby is not disturbed, while making X-rays.
• Optimum Bed dimensions ensure optimum work space for the nursing staff.
• Displays set temperature & infant temperature simultaneously.
• Comprehensive Alarms and safety cut-offs.
• Wide base for stability and Anti Castor wheels with brakes for good mobility.
• Easy to use and clean.
• Convenient Storage tray & Cabinets, IV Pole, Infusion Pump Mounting Pole, Tray for Vital Sign Equipments, Halogen Lamp for observations.

nice 2007 S CFL is an infant radiant warmer with undersurface phototherapy equipment. Some of its salient features include:

• Controls: Servo / Manual
• Modes: Servo, Manual, APGAR
• Probe: Thermistor based, Interchangeable with Accuracy /- 0.2 °C
• High Intensity Quartz Heating element for effective Radiation (Ceramic Optional)
• Halogen Observation Lamp
• Heater Module Swiveling for taking X-Ray
• Bed Head Up / Down Facility
• 4 Side Acrylic Sheet Collapsible
• 2" Foam Bed / Transparent Acrylic Bed
• Safety Features, Safety Cut Offs & Comprehensive Alarms
• Warmer with undersurface Phototherapy (Conventional & CFL)
• Complete with all accessories to choose at your convenience viz.Storage Tray, Inbuilt Storage Drawer, X-Ray Tray, O2 Driven Slow Suction, O2 Flow Meter, Manual Respirator (Ambu Bag), Monitor Tray, IV Stand Large / Small, Pump Mounting Pole, O2 Cylinder Mounting Provision.

The free standing nice 2010 Infant Warmer offered by us is a mobile, stand alone system with height adjustment and can be conveniently placed over any baby cradle or trolley. Also, the nice Baby Trolley is available for use with free standing warmer models. Salient features of the product are as follows:

• Micro Processor Controlled with Servo & Manual modes of operation.
• This infant warmer provides automatic over heat and over temperature protection in both manual and servo modes.
• Quartz Infrared heater element with very effective heat Radiation.
• Thermistor based high sensitive Temperature Probe ensures an accuracy of /- 0.2 °C. Probe is inter-changeable without calibration.
• The Parabolic Reflector is designed to send uniform heat to the bed surface.
• Memory Backup to restore set temperature and previous mode, in case of power failure.
• Swiveling Capacity of the Heater Unit for taking X-rays.
• Displays set temperature & infant temperature simultaneously.
• Comprehensive Alarms and safety cut-offs.
• Wide base for stability and Anti Castor wheels with brakes for good mobility.
• Easy to use and clean.
• IV Pole, Infusion Pump Mounting Pole, Tray for Vital Sign Equipments, Halogen Lamp for observations.

Model: nice 2007-S-W

• This 2007-S-W can be conveniently mounted on a wall as per user convenience.
• The nice Baby Trolley are available for use with Wall Mount warmer models.
• Manual / Servo Mode Infant Warmer.
• This infant warmer provides automatic over heat and over temperature protection.
• Quartz Infrared heater element with very effective heat Radiation.
• Thermistor based high sensitive Temperature Probe ensures speed an accuracy: of /- 0.2 °C. Probe is inter-changeable without calibration.
• The Parabolic Reflector is designed to send uniform heat to the bed surface.
• Memory Backup to restore set temperature and previous mode, in case of power failure (Optional).
• Comprehensive Alarms and safety cut-offs.
• Halogen Lamp for observations

Manufactured from qualitative materials, nice 4000 Series of Phototherapy Units is available in both conventional & CFL phototherapy. Specifications and features of the product include:

• Configurations: Free Standing Models, Undersurface & Double Surface Phototherapy available.
• Adjustable Height - Conveniently allows you to control irradiance levels on the neonate.
• Convenient Tilting of Source Unit, Height Adjustment with Single hand and Castors with elegant maneuvering helps to place the system at different positions, at user convenience.
• Integral Timer - This timer can be a guide for monitoring and replacing lamps, as needed.
• The standard models carry 6 Lamps - 4 Blue lamps for Phototherapy and 2 white lamps for diagnosis.
• Wide base for rigidity.

The nice 4005 Series of Phototherapy Units are offered in standard as well as customized configurations, as per clients’ specifications. Conventional as well as CFL Phototherapy are avialble with us. The product is available with a convenient Baby Bed and a Phototherapy Source unit placed on the Under Surface of the baby bed. Some of its other features include:

• Source unit includes an Integral Timer, Bulb Choices and safety features to dissipate possible heat radiations.
• Baby Bed with tilting facility.
• The unit is available with both conventional and CFL lamp sources.

nice aster2 Digital Pulse Oximeter is a very cost effective product and features all the characteristics of major brands. Its salient features include

• Large super bright LED Display
• AC or Battery operation for versatile monitoring.
• Pulse Oximeter with SpO2%, Pulse Rate & Pulse Signal Strength.
• Low Perfusion pick up with a tricolour Perfusion indicator.
• Dual Color Bar Graph
• RS 232 Interface.

Continuous R&D activities ensure that we offer only the innovative "nice 6000M Infant Observation Trolley ". It has a storage tray and a comfortable baby bed with a 2" form bed. The bed has 4 Acrylic Side Panels with good visibility to see through from a distance. It also has a wide base with good mobility and stability.

Backed by a diligent workforce, we offer "nice 1000 Baby Weighing Machine" to our clients. Known for its precise readings, the product has following features and specifications:

• The Unit is a micro-computer controlled system.
• Has an electronic damping facility to eliminate reading fluctuations.
• Has a sturdy Acrylic baby pan.
• Has Tare and Hold Keys.
• Capacity: 20 Kgs.
• Accuracy of 2, 5 & 10 grams.
• Has an in-built infantometer