Tube Installation Tools

We put forth for our clients Serrating/Grooving Tool-'NW' Series, which is easy to use and provided with easy to change cutter for various groove shapes. Designed using quality tested raw material, these tools can be used with CNC drill machines, boring machines, and lathes. Prior to delivery, we check these tools on various well defined quality parameters.

 

Features:

• Changing of pilot nose and cutter allows one tool to cover a range of hole diameters.
• Location and depth for cut easy to adjust.
• Light pressure is required to cut precision grooves
• The life of cutter can be extended by resharpening

 

Note: Clients should specify whether they need circular from cutter (one piece HSS construction) or tool bit holder with tool bit, when ordering. Refer to operation manual for detailed spare parts list. Ask for leaflet number 038 for detailed features.

 

Blank

Bore Range		Tool Model No.	Pilot Nose Model No.	Circular From Cutter Model No.	Tool Bit Holder Model No.	Spare Tool Bit Model No.
mm	inch
09/01/32	3/8 - 1.1/4	1 NW - 2 MT	1 NW - PN	1 NW - CF	1 NW - TBH	1 NW - TB
16 - 45	5/8 - 1.3/4	2 NW - 3 MT	2 NW - PN	2 NW - CF	2 NW - TBH	2 NW - TB
19 - 48	3/4 - 1.7/8	4 NW - 4 MT	4 NW - PN	4 NW - CF	4 NW - TBH	4 NW - TB
38 -102	1.1/2 - 4	6 NW - 5 MT	6 NW - PN	6 NW - CF	6 NW - TBH	6 NW - TB

With the assistance of our hard working professionals, we offer a wide range of Total Sheet Reamers. Coated with titanium nitride, these cryogenically treated reamers are suitable for tube sheet reaming and heat exchanger. Efficient use of steel in the manufacturing process has made these reamers durable and wear & tear resistant. Further, we also offer reamers in MM size.

We are one of the leading manufacturers and suppliers of Serrating/ Grooving Tool-'SGT' Series.

Features:

• Only light pressure required to cut pression grooves inside holes or cylinders.
• Location and depth of grooves easy to adjust.
• Simple to changes cutter from different grooves shapes.
• Changing of bushing and cutter allows one tool to cover a range of hole diameters.
• The life of cutter extendable by resharpening.

Blank

Bore Range		Tool Model No.	Pilot Nose / Bushing Model No.	Tool Bits Model No.
mm	inch
10/13/10	0.40 - 0.51	SGT - 102	SGT - 102 - PN	SGT - 102 - TB
12/07/16	0.50 - 0.63	SGT - 122	SGT - 122 - PN	SGT - 122 -TB
16 - 20	0.63 - 0.79	SGT - 162	SGT - 162 - PN	SGT - 162 - TB
19 - 32	0.75 - 1.26	SGT - 193	SGT - 193 - PN	SGT - 162 - TB
30 - 52	1.18 - 2.05	SGT - 303	SGT - 303 - PN	SGT - 303 - TB
50 - 78	1.97 - 3.07	SGT - 504	SGT - 504 - PN	SGT - 504 - TB

Features :

Changing of pilot nose and cutter allows one tool to cover a range of hole diameters.

Simple to change cutter for different groove shapes.

Location and depth for cut easy to adjust.

Only light pressure required to cut precision grooves.

Ready to fit CNC drill machiones, lathes and boring machines.

The life of cutter extendable by resharpening.

Operation
The leak director detects tube leackage merely by pressing a button. The Pressurizing gun and plugging gun are inserted into opposite ends. Pressuring Gun lets in air to pressurise the tube to 100psi with compressed air. The guage will show and hold the pressure if there are no leaks. Conversly, apressure drop is indicated on guage incase of tube leak. A quick slide of exhaust valve silently lets out the air in tube and releases the gun for next tube test. 

Features:

Simple, Quick and Reliable tube and joint testing. Test 7 to 8 tubes or 10 tube joints per minute. Interchangeable seal sets : Allows testing of tubes from 7.75 mm to 30.63 mm ID with easy to replace accessories. Each Tube Testing Gun weighs less than 1.3 kg and Joint Testing Gun weighs less than 1.5 kg. Air supply : Uses standard plant air supplies from 70 psi ( 07 to 6.8 bar ). Silent during use. Ergonomic design makes testing effortless. Each Kit packed in easy to carry case.

Operation
The Joint Tester is designed to test both rolled and welded tube-to-tubesheet joints. Joint Tester is inserted in tube, a tigger expands tube seal inside the tube and beyond the length of expansion. Actuating a slide valve generates vacuum between the tube seal and face seal over the joint seam. Vacuum level is indicated on gauge. Should the amount of vacuum shown on gauge start dropping, a leak is detected.

Features:

Simple, Quick and Reliable tube and joint testing. Test 7 to 8 tubes or 10 tube joints per minute. Interchangeable seal sets : Allows testing of tubes from 7.75 mm to 30.63 mm ID with easy to replace accessories. Each Tube Testing Gun weighs less than 1.3 kg and Joint Testing Gun weighs less than 1.5 kg. Air supply : Uses standard plant air supplies from 70 psi ( 07 to 6.8 bar ). Silent during use. Ergonomic design makes testing effortless. Each Kit packed in easy to carry case.