 |
|
|
We are offering a precisely engineered range of Tube Removal Tools like Air / Hydraulic Pump, Continuous Hydraulic Tube Puller and Tube Plugs. These products are manufactured in compliance with defined industry standards.
|
| | Air / Hydraulic Stub PullerWe are one of the leading manufacturers and suppliers of Air / Hydraulic Stub Puller
Features : - Improved productivity and better control through foot pedal.
- Extremely compact, durable, lightweight and portable package - useful in confined areas.
- Makes pulling tubes faster and easier.
- Quick and easy arrangement to reduce downtime.
- Lowest priced system available.
- Safe - Totally air operated for use in explosive environments.
Blank | Length (mm) | 264 | | Width (mm) | 135 | | Height (mm) | 205 | | Weight without oil (kg) | 6.6 | | Hose Length (ft.) | 6 | | Hose I.D. (Inch) | 1/4" | | Air inlet Port | 1/2" BSP | | Hydraulic Port | 3/8" NPT | | Hydraulic Oil | VG ISO 68 Grade | | Workinh Air pressure (bar) | 7 | | Working hydraulic pressure (bar) | 700 | | | Send Enquiry |
Spring Balancer We are one of the leading manufacturers and suppliers of Spring Balancer. | Model | Balancing Capacity | Suitable For | | SEW - 9 | 5 - 9 Kgs | AHSP - 4 | | SEW - 22 | 15 - 22 Kgs | AHSP - 9 | -
POWERMASTER New SWF, SWA & SBH Series
Spring Balancers are specially designed to free the operator from the weight of hand tools. The tool can be pulled down with least pressure, without any strain or fatigue. Handling of the tool is very easy as the load and pressure required for operation is counter balanced in the mechanism of Spring Balancer itself. The operation is free of gravitational force. -
Rugged Construction
Main housing and cover plate are manufactured from high tensile light weight Aluminum Alloy for maximum resistance against impact and ease of handling. Upper support hook assembly and Bottom suspension hook assemblies are manufactured of forged steel to provide maximum safety. Standard flexible wire rope is used for cables to provide good flexibility and fall safety. -
Tapered Cable Drum
Unique cable drum design matches the middle turns of spring, where the optimum torque build-up is constant. This design feature provides smooth, and even cable tensions throughout the entire length of cable travel. -
External Tension Adjustment
External tension adjustment is easily accessible from the floor. Tension can be set at the exact requirement through a hardened worm form gear system. No special tool needed. -
Swivel on Top Hook
Allows 360º rotation. Positions the Balancer for easiest cable flow. Prolongs cable life. | | | Send Enquiry |
| | Auto Stub PullerWe are one of the leading manufacturers and suppliers of Stub Puller Cylinder. Features:- | Model | AHSP - 4 | AHSP - 9 | | Extraction Load (Ton) | 4 | 9 | | Recommended Tube Sizes | Up to 3/4" OD | Up to 1.1/4" OD | | Overall Dimension (mm) L x | 550 x Ø 65.0 | 550 x Ø 104.0 | | Stroke (mm) | 150 | 150 | | Pulling Speed secs. / Stroke | 15 | 30 | | Weight (kg) with accessories | 9 | 18.5 | | | Send Enquiry |
Stub Pulling Gun We are one of the leading manufacturers and suppliers of Stub Pulling Gun. | Model Number | CTP - 900 | CTP - 1100 | | Capacity / inside dia. of expanded tube (mm) | 13 to 31 | 31 to 51 | | Maximum stroke (mm) | 60 | 100 | | Weight (Kg) | 23 | 27 | | Max. Working Pressure (bar) | 700 | 700 | | Max. Pulling force (ton) | 13 | 31 | | | | Send Enquiry |
| | Hydraulic PowerpackWe are offering Hydraulic Powerpack. | Model Number | PPP - 35 | EPP - 15 | | Power | Pneumatic | Electric | | Motot H.P. | 3.5 | 1.5 | | Flow rate | 4.5 lpm at 0 - 70 bar 1.8 lpm at 70 - 700 bar | 3.5 lpm at 0 - 70 bar 0.45 lpm at 70 - 700 bar | | Tank capacity (liters) | 10 | 10 | | Weight including oil (kg) | 40 | 52 | | | Send Enquiry |
Tube Removal Tools We are one of the leading manufacturers and suppliers of Tube Removal Tools. Features:- - Used to 'thin' the walls of heavy gauge tubes as a step in their removal from tube sheet.
- Suffix model number with tube gauge when ordering. Example for 3/4" OD. 16G, model no. will be WR-750-16.
- Wall reducers available for mm tube sizes also. Please enquire.
- Wall reducers are suited for tube sheets up to 5" thick. Longer reaches are available.
| Tube O.D. inch | Model Number | MT Shank # | | 03/08/10 | WR-375 | 1 | | 01/02/10 | WR-500 | 2 | | 05/08/10 | WR-625 | 2 | | 03/04/10 | WR-750 | 2 | | 07/08/10 | WR-875 | 3 | | 1 | WR-1000 | 3 | | 1.1/4 | WR-1250 | 3 | | 1.1/2 | WR-1500 | 3 | | 1.3/4 | SH-1750 | 3 | | 2 | SH-2000 | 3 | | 2.1/2 | SH-2500 | 4 | | 2.3/4 | SH-2750 | 4 | | 3 | SH-3000 | 4 | | 3.1/4 | SH-3250 | 4 | | 3.1/2 | SH-3500 | 4 | | 4 | SH-4000 | 4 | | | | Send Enquiry |
| | Tube Drift / Knockout ToolWe are one of the leading manufacturers and suppliers of Tube Drift / Knockout Tool. Features:- - Used with pneumatic chipping hammer to knok out tubes / tube stubs from tube sheet.
- Available in 01 and 06 shanks as standard. 15 (Jumbo) shank available on request.
- Suiffx model number with tube gauge and shank when ordering. Example for 3/4" O.D. 16G, 06 shank, model number will be KT-750-16-06.
- Tube Drifts are available for mm tube sizes also.
- Standard reach is 6". Longer reaches are available.
Blank | Tube O.D. inch | Model Number | | 03/08/10 | KT-375 | | 01/02/10 | KT-500 | | 05/08/10 | KT-625 | | 03/04/10 | KT-750 | | 07/08/10 | KT-875 | | 1 | KT-1000 | | 1.1/4 | KT-1250 | | 1.1/2 | KT-1500 | | 1.3/4 | KT-1750 | | 2 | KT-2000 | | 2.1/2 | KT-2500 | | 2.3/4 | KT-2750 | | 3 | KT-3000 | | 3.1/4 | KT-3250 | | 3.1/2 | KT-3500 | | 4 | KT-4000 | | | Send Enquiry |
Model CH-1 We are one of the leading manufacturers and suppliers ofModel CH-1. Features:- | Blows/mm | Bore | Stroke | Weight | | 1600 | 1.1" (28.5mm) | 3.1/4" (82.5mm) | 16lbs (7.0kg) | | | | Send Enquiry |
| | Continuous Hydraulic Tube PullerWe are one of the leading manufacturers and suppliers of Continuous Hydraulic Tube Puller.
Features : - Pulling gun communicates with powerpack via DC remote control. This ensures safely and eliminates the need of electrical cord between pump and gun that ohter manufacturers provide.
- Available with a choice of Electric - TPP System or Pneumatic - PPP System for hazardous, explosive working environments.
- Microprocessor controls on powerpack and gun ensure trouble free life.
- Removes tube without any damage to tube sheet.
- Low setup time and ease of operation.
- High power & High speed automatic cycling, for highest speed of pull available worldwide.
- Auto switchover from low pressure high flow to high pressure low flow on load and again back to low pressure high flow when load is released.
- Automatic slow start feature to minimize risk of breaking tubes and to conserve consumables.
- Compact design of Powerpack and Gun.
- Interchangeble pulling guns with same Powerpack. 15 ton gun for light duty high speed work, 30 ton gun for heavy duty tube pulling and 45 ton gun for tubes upto 3" O.D.
- Totally stainless steel construction body of powerpack for longer corrosion free life.
- Pulls up to 3" OD tubes continuously, pulls up to 4" O.D. stub.
- Low maintenance cost and worldwide availability of components.
- Significant saving of time and money over conventional system.
- Unit is portable with handle and mounted on four wheels for easy handling.
- Unit wil pull tubes continuously through the gun effortlessly, needing only one man for operation.
| | Send Enquiry |
Auto Stub Puller We are one of the leading manufacturers and suppliers of Auto Stub Puller. Features:- - Designed for fast removal of ferrous and non-ferrous tubes from Condensers, Heat Exchangers, and Boilers.
- A rapid stroke allows the removal of 10 tubes a minute with little operator efforts
- Gripping and pulling done in single operation.
- Compact and lightweight pulling gun, easy to operate inside boiler drum with 24 Volt DC control.
- Auto ejection of tube after removal.
- Remove tubes without any damage to tube sheet.
- Pneumatic version available for harzardous and explosive areas.
- Low setup time and ease of operation.
- Auto Switchover from low-pressure high flow to high-pressure low flow on load and back again when load is released.
- Interchangeable pulling gun with same power pack.
- Significant savings of time & money over conventional methods of stub removal.
- Can pull from 13 mm to 51 mm I.D. Tubes.
| | | Send Enquiry |
|
|
© Niksu Power Tools. All Rights Reserved (Terms of Use)