Industrial Computer Products
|
|
|
We are the distributors of industrial computer products such as panel computers industrial PC, Panel PC, embedded cards for OEMs, ATM, Kiosk, POS manufacturer and end users who seek to automate their applications quickly and cost effectively.
|
 |
|
|
|
DAS I/O Modules, RS232/422/485 Converters & Repeaters
We are the distributors of Remote 7K DAS module for analog/digital I/O. OPC / DDE drivers for SCADA interface. RS232/422/485 converters/repeaters.
I 7520R model is used for PLC user. The design of isolation between I-7520 and I-7520R is different. If the user want to supply the power from PLC, he should use the I-7520R. Otherwise the isolation will be broken. For Supply from PC side Use I 7520.
We offer RS 232 to RS232 Isolators, RS232 to RS 485/RS422 Converters, RS 422/RS485 Isolators, USB to RS 232 /RS422/RS485 Converters which will work for all software with powerful flawless software drivers.
Analog & Digital I/O Remote DAS Modules for all field Inputs is available.
|
|
|
|
Multi Port RS 232/RS 422/RS 485 Boards
We are the distributors of Multi port RS 232 /RS422/ RS 485, PC add-on card PCI & ISA Bus. The PCCOM PCI bus 4 port adapter is an 32 bits PCI bus board with Plug and Play (PnP) features, it provides four asynchronous serial communication ports (RS232 or RS422 or RS485), which link the computer and serial peripheral devices such as terminals, modems, serial printers, plotters etc.
The PCCOM PCI bus 4 port adapter is particularly suited to facilitate the connection of terminals (VDUs) in multi-user operating systems. The PCCOM board may be installed in any Pentium or hardware compatible systems. The PnP features let hardware configuration for IRQ and I/O address is detected by BIOS automatically, you don't need set switch and jumper. Since most of the computer has its own COM1 and COM2, the PCCOM PCI bus 4 port adapter can be configured from COM4.
|
|
|
|
|
|
|
|
Single & Multi Loop PID Controllers, SSR, SCR Etc.
We are the distributors of PID controller, SSR & SCR which is suitable for industrial control applications.
Specifications:
PID controller
• Input : K, J, Pt, R, S, N, T, E, B, DC linear.
• Output : RELAY(250V/5A), DC24V, DC linear
• Control : PID, ON/OFF
• P Band : 0%-200% full Scale
• Cycle Time : 0-100 Sec.
• Accuracy : 0.3% Full Scale
• Power Supply : AC 85V~265V, 50/60 HZ , 24V DC
• 1/4, 1/8, 1/6 DIN Sizes.
• Two-point alarm, with 16 alarm modes.
• Auto/Manual tuning switchable.
• Sensor Break display indication, "open"
SSR
• Load current ranges from 10 to 40 Amps.
• Internally mounted snubbed circuit protection for huge current(dv/dt) application
• Zero Crossing turn-on, Zero current turn-off.
• With LED display to detect the operating of devices.
• Photo-isolation, 4000V Rms isolation.
• R SERIES have output power 0~90%
• Ambient Temperature : -10~55oC.
|
|
|
|
Signal Isolators, Motion Controllers
We are the distributors of signal isolators & conditioners for all industrial inputs like: Mv, mA, RTD, TC, frequency, etc.
RTD/TC/STRAINGAGE/MV/V/I Single channel isolated Signal conditioner, Transmitter, output configurable as Voltage or Current, Din Rail Mounting, Supply voltage 10-30V Dc.
Single input dual outputiDIN 1X2signal Isolation Transmitter,
Efficiency grade: 0.1A0.2A0.5B
International standard signal input: 0-5V/0-10V/1-5V, 0-10mA/0-20mA/4-20mA
Output internal signal with high load capabilityF 5V/0-10V/1-5V,0-10mA/0-20mA/4-20mA and so onB
Extremely high linearity in whole processiNonlinearity<2%j
DIN 1X1 V/F Transmitter Change the input signal into unit impulse signal
Efficiency grade: 0.1A0.2A0.5B
International standard signal input: 0-5V/0-10V/1-5V, 0-10mA/0-20mA/4-20mA
Standard signal outputF 0-5KHz/0-10KHz/1-5KHz and so onExtremely high linearity in whole processiNonlinearity<2%j
Signal input/output/ Accessorial power supply
|
|
|
|
|
|
|
|
Electrical Parameters Transducers & Transmitters.
We are the distributors of electrical transducer & transmitter for voltage, current, power & single & three phase, with analog o/p & mod bus o/p for various range.
Element AC Multi-parameter Digital Transducer
• Input (measuring range: AC 45-65Hz, voltage: 110V, 220V, 380V and 500V(or specially supply to meet user's other special requirement), current: 1A, 5A, 15A, 25A (or specially supply to meet user's other special requirement)
• Data output: RMS of voltage V, RMS of current I, frequency F, active power P, reactive power Q, power factor cos?, active energy, and reactive energy.
• Output interface: RS-485: 2-wire connection, communication distance: 1200m, ±15KV ESD protection. RS-232C: S3 case style connects to special RS485/RS232C converter.
• Accuracy grade: Frequency 0.05 Hz. Voltage, current, power factor, active power, reactive power, active energy, reactive energy: 0.5% grade. (Accuracy and linearity are ignored when the voltage is below 5%.)
• Baud rate: 1200, 2400, 4800, 9600, 19.2K bps
• Refreshing period: 250mS
• Isolation voltage: 2500V DC
• System power consumption: <200 mw (+12V)
• Power source: +5V, +12V, +15V, +24V, +48V DC,220V AC DC(please specify any one of the five options in you order)
• Operation temperature: 0°C ~50°C
• Storage condition: -20°C ~+80°C (RH: 5%~95% no dew)
• Case style: S3(Window :?6.5 ), N ( no window)
• The address and baud rate of the transducer can be modified by use of software.
|
|
|
|
8 K Series Embedded Controllers & DAS I/O
We are the distributors of 8K series embedded controller for industrial application with PLC type ADON modules for analog and digital I/O. The I-8437 / 8837 provides Ethernet & serial DAS solutions. It contains 4 communication ports. These different communication ports can provide different kinds of usage include RS485 networking, controller to controller data-exchange, Mod bus / Mod bus TCP protocol, remote I/O extension, linking with HMI / MMI, program download / upload and debugging, Remote IO modules are useful for some distributed applications. The I-8417 / 8817 / 8437 / 8837 can integrate with the I-7000 and I-87xx modules by linking one of its COM3 or COM4 ports to each remote I/O module. A max. number of 64 remote I/O modules can be linked to one controller and max. number of 16 I/O channels for some remote I/O modules. These Controllers Can be ISaGRAF Embedded controllers which is a powerful soft PLC.
|
|
|
|
|
|
|
|
Industrial PC
We are the distributor of industrial computer & workstation with latest AXIOMTEK PICMG.
Features:
•1.3 single board computers with high performance Intel® Pentium® 4 and low power Intel® Celeron® processors
•Two 240-pin DDR2 DIMM slots support up to 4GB memory capacity
•Four Serial ATA port support data transfer rate up to 300MB/s
•CompactFlash™ Type II socket on board
•LVDS connector on board (optional)
•Built-in 6 USB ports (2 ports on I/O bracket
4 ports by pin-header)
•CHASSIS: Three 5.25" and max. two 3.5" disk drive bays
•One 12cm ball-bearing fan (optional two 12cm fans)
•Supports 14-slot back plane or ATX MB
•Hot-swap redundant power supply supported
•Built-in centralized sensor module (only AX6156E).
|
|
|
|
Bulk SMS Solution
-
GSM/GPRS: 900/1800 or 850/1900 or 850/900/1800/1900MHz -
16 SIM card slots -
Wireless access to internet -
Comply with GSM Phase2 standard -
Send and receive SMS, MMS, e-mail and data -
Maximum transmitting speed 115KBps -
Input voltage: 100V- 240V -
Working temperature: -20 to +60 -
Storage temperature: -25 to +70 -
Double tone multi-frequency function(DTMF) -
Send maximum 9600 SMS or 9600 MMS per hour -
Accessories: 1 power cable, 1 data cables, cards, 16 antennas, CD |
|
|
|
|
|
|
|
GT-540/ 540P Smart GPRS & SMS Modem
The GT-540 is an intelligent Active GPRS Remote Terminal Unit. Within the high performance 32 bit CPU, the GT-540 is suit for the hard industrial environment. It features GPRS/GSM module, 6 digital inputs, 2 digital outputs, 1 analog input, 2 RS-232, 1 RS-485 and SD interface. It can be used in M2M application fields to transfer the local I/O or Modbus device’s data by GPRS by the defined period or DI/AI triggers. The local I/O data can also be stored in the SD card to become a remote data logger. For another communication path, the GT-540 offers the e-mail mode to transfer the data by e-mail via GPRS for users to choose. The simple I/O linkage function of the GT-540 can reach the real time control in local field. It also supports Li-ion battery as another power source when the main power is failed temporarily. Therefore, the GT-540 is an ideal solution for environmental monitoring and remote device management for M2M applications. Meanwhile, it is supplied with easy-to-use API and OPC server Software that streamline application development process, freeing system integrators from dealing with complex communication protocols of GPRS and the Internet. |
|
|
|
SCADA & DAS Software
Ellipse Scada To create supervisory and control applications on several different areas, the definite solution is the family of products Elipse SCADA (Supervisory, Control, and Data Acquisition System). Elipse SCADA is, at the same time, accessible, friendly, and totally flexible. This is why it is the ideal tool for automation, for it eliminates the need for lengthy, expensive solutions, enabling the process with competitiveness, efficiency, and quality. Elipse Software’s constant research guarantees its products permanent update, as well as the introduction of new technologies. Elipse SCADA is available for Microsoft Windows 98, ME, NT, 2000, XP, 2003 and Windows CE platforms
|
|
|
|
|
|
Industrial Computer Products DAS I/O Modules, RS232/422/485 Converters & Repeaters Multi Port RS 232/RS 422/RS 485 Boards Single & Multi Loop PID Controllers, SSR, SCR Etc. Signal Isolators, Motion Controllers Electrical Parameters Transducers & Transmitters. 8 K Series Embedded Controllers & DAS I/O Industrial PC Bulk SMS Solution GT-540/ 540P Smart GPRS & SMS Modem SCADA & DAS Software Wireless Products Computer Products
|
