Stannous Octoate

With the assistance of our advanced technology and experienced professionals, we have been engaged in offering NCDC Stannous Octoate. Widely appreciated for its quality standards, these driers are widely used as polymerization catalyst for urethane foam transformer oil, vulcanizing agent and curing agent. We even offer customized solutions as per the client specific requirement.

Catering to the demands of our esteemed customers, we offer quality range of NCDC Cerium Octoate. Popularly known as rare earth (cerium) this primary drier promotes polymerization and imparts through drying appropriately.

When used along with cobalt it has a synergistic effect that results in lower percentage requirement of cobalt and thereby offering an economy. It finds use in lead free compositions and has to be used judiciously due to its skinning tendency.

Features:

• It has the ability as oxygen carrier
• In alkyd-based varnishes, it is more active as compare to lead
• In contrast with lead driers, rare earth (Cerium) does not cause turbidity in oils and alkyd-based varnishes
• Dosage 0.2 to 0.4% V/S

With rich experience, we have emerged as one of the renowned manufacturer  and exporters of NCDC Manganese Octoate. Prepared using quality ingredients, it acts as oxidation as well as polymerization catalyst. It is more surface than' through' drier, but films based on manganese are not quite flexible as film based on cobalt and manganese combinations. When this drier is combined with lead, it improves polymerization.

Features:

• Finds application in air drying stoving and baking finishes along with cobalt
• Preferred for black enamels and avoided in white finishes as it gives a brown to pink undertone
• Dosage 0.2 to 3% V/

We are amongst the renowned manufacturer of NCDC Zinc Octoate. Better known as auxiliary drier, zinc is used with active driers and retards surface drying, by open surface for continuous oxygen penetration and absorption. It possesses fungicidal property and is highly effective against mould growth and fungi. This paint drier compound finds application in pharmaceutical and as rot proofing agent.

Properties:

• Helps to stabilize lead and reduces silking and skinning
• It promotes hardness, improves gloss and color retention of enamels
• It is powerful wetting and dispersing agent
• Used in polyurethane, polyester and V.C. as stabilizer or curing agent
• Dosage 0.5 to 1,5%

Catering to the demands of our clients, we are engaged in offering quality range of NCDC Cobalt Octoate. Cobalt is the most effective drying agent (per unit of metal) and has the highest level of activity in promoting autoxidation. If used in excess it can causes surface wrinkling. This drier is widely used in white enamels and pale color completely bleaches out in drying of the film to enhance whiteness. Oil films containing cobalt have a high electrical resistance enabling it to be used in varnishes and oil impregnation compound

Features:

• It is essential constituent of printing inks & varnishes for rubber
• Used at level of only 0.03 to 0.06% metal of V/S
• Extensively used in all types of paints, varnishes & printing inks, insulating varnishes enamels, leather cloth white enamels, stoving tinplate lacquers & wrinkled finishes
• Used as an accelerator to certain organic peroxides which catalyses the cold curing of polyester resins and is used in laminating field bonding rubber to steel and other metals.

We are one of the leading manufacturer and exporters of NCDC Lead Octoate that are widely appreciated for quality standards. These lead driers promote polymerization beneath the surface and impart optimum balance of drying characteristics when used with cobalt or manganese or calcium. To avoid precipitation in alkyd resins, lead is always used with calcium.

Properties:

• Lead destroys the leafing property of aluminum paint it also affected by sulphur fumes as it gets discolored
• Lead preserves the elasticity of the film, enhances the toughness and durability of the film in pronounced manner
• Improves water & salt resistance of the film
• Dosage 0.5 to 1.0% based on vehicle solids

Lead is extensively used in insulating varnishes, tung oil varnishes, floor varnishes, elastic carriage varnishes and pair pressure lubrication and greases. Along with this, it is also used as pigment dispersing and wetting agent in grinding mill base.