Aligners Ranges

A perfect quadrilateral is built around the vehicle.

The measuring heads initially positioned in the corners of said quadrilateral move automatically to the front of the wheel targets, when the system is started.

After about 7 seconds, the front and rear direct angles are measured and visualized, such as: toe-in, toeout, camber and thrust angle.

A innovative system of sensors automatically insures the longitudinal and transversal levelling of the lift at any working height.

As many as 8 measurements per second with an accuracy of 0,005° (five thousends of a degree) allow the most accurate and quickest adjustment of the vehicle.

3 different program tests are available, to satisfy the different needs of the customers:

• direct angles
• direct angles + "quick caster"
• direct angles + in direct angles (caster, kingpin)

The following further tests can be added:

• Achermann
• maximum steering
• frame diagnosis
• toe and caster adjustment with steered wheels

For more details refer the Pdf file.

TD 2200 WS

Top of the range models. Data Bluetooth^® transmission allows maximum mobility between different working positions, also when using electronic turning plates, thanks to the absence of cables and any fix structure. The availability of unique accessories, light measuring heads and the possibility to perform the run-out compensation without lifting the vehicle, make of these models the ideal wheel aligners for the most demanding customers.

Equipped with 22" TFT colour monitor.

Capability to use electronic turning plates, as requested by some car manufacturers for the automatic reading of maximum steering.

The keyboard is installed on a drawer to avoid damage when not used.

• Data management and display program in Windows^® environment.
• Data bank with more that 80000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 50000 jobs with search by customer name or vehicle plate number.
• The keyboard with remotecontrol function provides total "on vehicle"operation so the control unit only needs to be used at the start and end of test.

Adjustment instructions are given by means of an animated and detailed 3D graphic.

The program for run-out Any Position, makes it possible to have an automatic compensation of the run-out, regardless of the angular wheel position before measuring.

A special Spoiler Program is automatically activated, through a simplified practical procedure, to perform the measurements on sport and tuned car bodies.

The steering procedure is carried out electronically, through the CCD sensors, so that the caster and king pin are obtained with great precision.

User’s instructions by animated graphicsfor an immediate operation.

STANDARD

• 1 control unit complete with PC, monitor, key-board, printer and battery-charger
• 2 front measuring heads
• 2 rear measuring heads
• 1 brake pedal depressor
• 1 steering wheel lock

• 2 pair of STDA33EU four point clamps, for 10" to 24" rims

For more details refer the Pdf file.

Top of the range models. Data Bluetooth^® transmission allows maximum mobility between different working positions, also when using electronic turning plates, thanks to the absence of cables and any fix structure. The availability of unique accessories, light measuring heads and the possibility to perform the run-out compensation without lifting the vehicle, make of these models the ideal wheel aligners for the most demanding customers.

Equipped with TFT 22" colour monitor.

Capability to use electronic turning plates, as requested by some car manufacturers for the automatic reading of maximum steering.

The keyboard is installed on a drawer.

• Data management and display program in Windows^® environment.
• Data bank with more that 20.000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 20.000 jobs with search by customer name or vehicle plate number.
• The keyboard with remotecontrol function provides total "on vehicle"operation so the control unit only needs to be used at the start and end of test.

Adjustment instructions are given by means of an animated and detailed 3D graphic.

A special Spoiler Program is automatically activated, through a simplified practical procedure, to perform the measurements on sport and tuned car bodies.

The steering procedure is carried out electronically, through the CCD sensors, so that the caster and king pin are obtained with great precision.

User’s instructions by animated graphicsfor an immediate operation.

STANDARD

• 1 control unit complete with PC, monitor, key-board, printer and battery-charger
• 2 front measuring heads
• 2 rear measuring heads
• 1 brake pedal depressor
• 1 steering wheel lock
• 2 pair of STDA33EU four point clamps, for 10" to 24" rims
• 1 pair of S110A7 turn tables
• Instruction manual

For more details refer the Pdf file.

top of the range model. Data bluetooth^® transmission allows maximum mobility between different working positions, also when using electronic turning plates, thanks to the absence of cables and any fix structure.

8 ccd sensors .

• data management and display program in windows^® environment.
• data bank with more that 80000 vehicle data sheets already entered and further blank sheets to be filled.
• customer data bank for recording 50000 jobs with search by customer name or vehicle plate number.
• power is supplied by long-life rechargeable batteries.
• the keyboard with remote-control function provides total "on vehicle" operation so the control unit only needs to be used at the start and end of test.

the steering procedure is carried out electronically, through the ccd sensors, so that the caster and king pin are obtained with great precision.

a special spoiler program is automatically activated, through a simplified practical procedure, to perform the measurements on sport and tuned car bodies.

dynamic data bank in function of car chassis height: this data bank automatically modifies the aligment specifications based on chassis height measurement.

user’s instructions by animated graphics for an immediate operation.

clear and precise display of the adjustment points of the vehicle in 3d graphics.

standard equipment

• 1 control unit complete with pc, monitor tft 19",  key-board, printer and batterycharger.
• 2 front measuring heads.
• 2 rear measuring heads.
• 1 brake pedal depressor.
• 1 steering wheel lock.

• 2 pair of stda33eu four point clamps, for 10" to 24" rims

• 1 pair of s110a7 turn tables

• instruction manual.

for more details refer the pdf file.

data bluetooth^® transmission allows maximum mobility between different working positions, also when using electronic turning plates, thanks to the absence of cables and any fix structure.

6 ccd sensors.

• data management and display program in windows^® environment.
• data bank with more that 20000 vehicle data sheets already entered and further blank sheets to be filled.
• customer data bank for recording 20000 jobs with search by customer name or vehicle plate number.
• power is supplied by long-life rechargeable batteries.
• the keyboard with remote-control function provides total "on vehicle" operation so the control unit only needs to be used at the start and end of test.

the steering procedure is carried out electronically, through the ccd sensors, so that the caster and king pin are obtained with great precision.

a special spoiler program is automatically activated, through a simplified practical procedure, to perform the measurements on sport and tuned car bodies.

dynamic data bank in function of car chassis height: this data bank automatically modifies the aligment specifications based on chassis height measurement.

user’s instructions by animated graphics for an immediate operation.

clear and precise display of the adjustment points of the vehicle in 3d graphics.

  standard equipment

• 1 control unit complete with pc, monitor tft 19",  key-board, printer and batterycharger.
• 2 front measuring heads.
• 2 rear measuring heads.
• 1 brake pedal depressor.
• 1 steering wheel lock.

• 2 pair of stda33eu four point clamps, for 10" to 24" rims

• 1 pair of s110a7 turn tables

• instruction manual.

for more details refer the pdf file.

• These aligners represent the very best choice in terms of price/ performance ratio.
• All the characteristic angles of both vehicle axles are controlled by means of four measuring heads with 8 CCD sensors and infra-red transmission.
• The light measuring heads and absence of connection cables between the heads make the system very easy to use.
• The wheeled control unit houses the data processing and management computer, the printer (color ink jet A4 format) and the highresolution monitor.
• Special supports on the side of the control unit permit housing and recharging of the measuring-heads battery when these are not used.
• Big wheels for easy movement inside the workshop.

The keyboard with remotecontrol function provides total "on vehicle" operation so the control unit only needs to be used at the start and end of test.

• Data management and display program in Windows^® environment
• Data bank with more that 20000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 20000 jobs with search by customer name or vehicle plate number.
• Summary and comparison of diagnosis/repair values on a single screen.

Infra-red transmission among measuring heads cable transmission between front measuring heads and control unit.

STANDARD EQUIPMENT

• 1 control unit complete with PC, TFT monitor, keyboard, printer and battery-charger.
• 2 front measuring heads.
• 2 rear measuring heads.
• 1 brake pedal presser.
• 1 steering clamp.
• Instruction manual.

For more details refer the Pdf file.

• These aligners represent the very best choice in terms of price/ performance ratio.
• All the characteristic angles of both vehicle axles are controlled by means of four measuring heads with 6 CCD sensors and infra-red transmission.
• The light measuring heads and absence of connection cables between the heads make the system very easy to use.
• The wheeled control unit houses the data processing and management computer, the printer (color ink jet A4 format) and the highresolution monitor.
• Special supports on the side of the control unit permit housing and recharging of the measuring-heads battery when these are not used.
• Big wheels for easy movement inside the workshop.

The keyboard with remotecontrol function provides total "on vehicle" operation so the control unit only needs to be used at the start and end of test.

• Data management and display program in Windows^® environment
• Data bank with more that 20000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 20000 jobs with search by customer name or vehicle plate number.
• Summary and comparison of diagnosis/repair values on a single screen.

Infra-red transmission among measuring heads cable transmission between front measuring heads and control unit.

STANDARD EQUIPMENT

• 1 control unit complete with PC, TFT monitor, keyboard, printer and battery-charger.
• 2 front measuring heads.
• 2 rear measuring heads.
• 1 brake pedal presser.
• 1 steering clamp.
• Instruction manual.

Model TD5040, with two front measuring heads equipped with 4 infra-red CCD sensors and two rear infra-red transmitters, makes it possible to measure all steering angles, operating first on the rear axle and then on the front one.

• Data management and display program in Windows^® environment
• Data bank with more that 20000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 20000 jobs with search by customer name or vehicle plate number.
• Summary and comparison of diagnosis/repair values on a single screen.

Infra-red transmission among measuring heads cable transmission between front measuring heads and control unit.

STANDARD EQUIPMENT

• 1 control unit complete with PC, TFT monitor, keyboard, printer and battery-charger.
• 2 front measuring heads
• 2 rear transmitters complete with hook-over clamps
• 1 brake pedal presser
• 1 steering clamp
• Instruction manual

For more details refer the Pdf file.

td8080t bth - bthr represent the latest technology in truck alignment.
these new developed aligners feature state of the art components.
specific truck alignment software developed with and for truck alignment specialists.

• data management and display program in windows environment.
• data bank with vehicle data sheets already entered and further blank sheets to be filled.
• customer data bank for recording jobs with search by customer name or vehicle
plate number.

summary and comparison of diagnosis/repair values on a single screen.

summary:

1. significantly higher income production through superior efficiency
2. much faster operating times without any loss of accuracy
3. simpler system to learn, less training time involved.

the wheeled control unit houses the computer, the printer and the high-resolution monitor.

special supports on the side of the control unit allows housing and recharging the measuring-head batteries.

big wheels for easy movement inside the workshop.

 

bluetooth

faster and more reliable data transmission through bluetooth (radio can be a problem on large vehicles).

 

4 remote controls

ability to operate the system from any head.

often you are a distance from the console and this slows down the operating speed.

 

modern technology

simpler and more modern technology (most recent design compared to major competition) grants better reliability and less down-time for the end user.

 

leds

leds on the head lets the operator know when adjustment angle is within specification range.

 

8 ccd aligner

• bluetooth transmission between front heads and cabinet;
• infrared transmission between sensor heads;
• de luxe cabinet with 19" flat screen;
• front and rear heads have extended drop-down sensor frame;
• double inclinometer to allow caster adjustment without steering;
• we recommend the new no run out clamps stda92 enabling to skip run-out compensation procedure;
• not suitable for car wheels (minimum wheel diameter 760mm)

 

standard equipment

• 1 control unit complete with pc, monitor, keyboard, printer and battery-charger
• 2 front measuring heads
• 2 rear measuring heads
• 1 brake pedal presser
• 1 steering clamp

td8080t bth - bthr represent the latest technology in truck alignment.
these new developed aligners feature state of the art components.
specific truck alignment software developed with and for truck alignment specialists.

• data management and display program in windows environment.
• data bank with vehicle data sheets already entered and further blank sheets to be filled.
• customer data bank for recording jobs with search by customer name or vehicle
plate number.

summary and comparison of diagnosis/repair values on a single screen.

summary:

1. significantly higher income production through superior efficiency
2. much faster operating times without any loss of accuracy
3. simpler system to learn, less training time involved.

the wheeled control unit houses the computer, the printer and the high-resolution monitor.

special supports on the side of the control unit allows housing and recharging the measuring-head batteries.

big wheels for easy movement inside the workshop.

 

bluetooth

faster and more reliable data transmission through bluetooth (radio can be a problem on large vehicles).

 

4 remote controls

ability to operate the system from any head.

often you are a distance from the console and this slows down the operating speed.

 

modern technology

simpler and more modern technology (most recent design compared to major competition) grants better reliability and less down-time for the end user.

 

leds

leds on the head lets the operator know when adjustment angle is within specification range.

 

6 ccd aligner

• bluetooth transmission between front heads and cabinet;
• infrared transmission between sensor heads;
• modern closed cabinet with 17" flat screen;
• front heads have extended straight sensor frame;
• double inclinometer to allow caster adjustment without steering;
• works on car and van with optional accessories.

 

standard equipment

• 1 control unit complete with pc, monitor, keyboard, printer and battery-charger
• 2 front measuring heads
• 2 rear measuring heads
• 1 brake pedal presser
• 1 steering clamp

With two front measuring heads equipped with 4 CCD sensors and two rear infra red transmitters, TD5040T makes it possible to carry out a quick and precise measurement of all steering angles on the front axle, or with two operations on front and rear axles to measure all related angles.

Thanks to the long reading distance of the measuring heads, by repeating this operation it is also possible to measure the angles on vehicles with three or more axles or steering axles.

All the characteristic angles of both vehicle axles are controlled by means of four measuring heads with 4 CCD sensors and infra-red transmission.

The light measuring heads and absence of connection cables make the system very easy to use.

The keyboard with remote-control function provides total "on vehicle" operation so the control unit only needs to be used at the start and end of test.

The wheeled control unit houses the data processing and management computer, the printer (color ink jet A4 format) and the high- resolution monitor.

Special supports on the side of the control unit permit housing and recharging the measuringhead batteries when these are not used.

Big wheels for easy movement inside the workshop.

• Data management and display program in Windows^® environment.
• Data bank with more than 20.000 vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording 20.000 jobs with search by customer name or vehicle plate number.
• Summary and comparison of diagnosis/repair values on a single screen.

Specifications