Scope Accessories

The BNC to 4 mm adapter connects two 4 mm (“banana”) plugs to a BNC socket.
If you have a sensor such as a current clamp with 4 mm plug outputs, for example, this adapter allows you to plug it into a Pico PC Oscilloscope with a BNC input.
The 4 mm sockets and BNC plug are fully shrouded for safety.

Technical Data:
Maxiumum voltage: 500 V CAT I
Maximum current: 3 A
Maximum resistance:  0.8 mΩ
Material:Polyamide insulators (-20 °C to +80 °C), brass Ni ground contacts, brass Au / Co conductor
Length:63 mm (about 2.5 in)
Width: 34 mm (about 1.4 in)
Height: 18.5 mm (about 0.8 in)
Weight: 24 g (about 1 oz)

This is a passive high-impedance oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1 MΩ shunted by 15 pF. However, it may be compensated for use with instruments having an input capacitance of 10 to 35 pF.
The probe has a further three trimmers for high-frequency compensation adjustment.

250 MHz Oscilloscope Probe x1/x10, Accessory for all Oscilloscopes

These probes are suitable for all oscilloscopes with BNC input sockets and accordingly,
for all Pico PC hosted Digital storage Oscilloscopes with 1MOhm input impedance.

Technical data:
Attenuation rate:  1:1  /  10:1 (switcheable)
Bandwidth: DC to 10MHz /  DC to 250MHz
Rise time: 35ns  /  1.4ns
Input impedance:  1MOhm / 10M Ohm
Input capacity: 46pF plus Oscilloskope / ca. 11pF
Operating voltage:  600V DC incl.  AC peak values  (decreasing with the frequency)
Cable length: 1.2m

We are engaged in offering Twin Display Clamp Meter to our customers. Clamp Meter is an electrical tester, which consists of an AC clampmeter and voltemeter that are specifically used for testing the flow of electricity current inside a conductor. Available with us in small sized cords, these testers can easily test flow of electricity in a wide range of electrical appliances. Further, these testing devices can be used to measure various parameters of AC current such as continuous or break up power supply, wire connection, flow level and many more.

We are one of the renowned manufacturers and suppliers of Mechanical Beam Setters, which are used for regulating and checking beams. These LASER 601 beam setters are able to test, both, the upper and lower beams including the fog light. Manufactured in accordance with the defined industry standards, we ensure that we provide an unmatched quality to our customers.

Functions:

• Optical and Mechanical sighting
• Complete analysis of any kind of beams

Specifications:

• Internal Power supply: 9V internal battery
• Range: from 200 mm up to 1500 mm
• Dimensions: 58 x 62 x 154
• Weight:.24 Kg
• Analogical Luxmeter: [in compliance with DM628J]
• Glass rectangular lens provided

Other details:

• Homologations: Italy c/o Ministero dei Trasporti

We are engaged in manufacturing and supplying a wide range of Electronic Beam Setters, which are fabricated by an expert team of professionals using high quality raw materials. Since, they are based on advanced technology, these beam setters are hugely demanded in the Automobile Industry.

 

Specifications:

• Dimensions (in mm): 1750 x 610 x 630
• Range: from 200 mm up to 1500 mm
• Weight: 40 Kg.

Specifications of Camera:

• Dimensions(in mm): 260 x 255 x 580
• Lens Diameter: 200 mm
• Focal: 500 mm

Electrical Features:

• Power supply: 12 Vdc internal battery (rechargeable)
• Consumption: 100 mA Ext. power supply (battery charger]: primary 230 Vac, sec 13,8 Vdc Class II, Cat Inst.
• Sighting system: mirror viewer
• Serial interface (MCTCNET compatible)
• Digital Luxmeter (compatible with. OM 628 specs.)
• Software for display and printing: included

Other details:

• Homologations: Italy c/o Ministero dei Trasporti