Lifts Ranges

Main nut and safety nut made of bronze (no plastic) with high resistance to wear, for greater safety.

Steel high resistance rolled screws, to provide long life.

Automatic and permanent nut lubrication system.

Tubular structure made of 5 robot welded sections, nothing sturdier in the world.

Shaft drive + Space Saver

Small base, allows easy access into the working area.

Self Supporting Base + Shaft Drive

The exclusive RAV lift with self supporting base and transmission by shaft.

KPS 326 H / 2700 kg
KPS 327 H / 3200 kg

• Three stage short arms provide asymmetric lifting of off-road and large vehicles - min. pad height 95mm.

KPS 329 HE / 3500 kg

• Versions with wider distance between posts (2650 mm).
• Longer arms to lift vans, cars and off-road vehicles.
• KPS 329 HE has two motors.

KPS 305 HE / 2700 kg
KPS 306 HE / 3200 kg

• Installation is possible on floor with poor surface anchorage. Three stage short arms provide asymmetric lifting of off -road and large vehicles.

KPS 305 HEK / 2700 kg
KPS 306 HEK / 3200 kg

• Arms suitable for quick drop-in extensions.

KPS 234 HE / 3500 kg

Exclusive lift with self supporting baseinstallation is possible on floor with poor surface anchorage. Shaft transmission between posts through oil filled conic gear boxes requiring no maintenance. Threestage short arms and twostage long arms provide asymmetric lifting of vans and off-road vehicles.

KPS 234 HEK / 3500 kg

• Arms suitable for quick drop-in extensions.

KPS 234 HELIK / 3500 kg

• Model equipped with four long three-stage arms: ideal to lift long wheel base vans and easy lifting of cars.

For more details refer the Pdf file.

kps 305 c 3 / 2700 kg
kps 306 c 3 / 3200 kg 

kps 305 c 2 / 2700 kg
kps 306 c 2 / 3200 kg
lift with base for easier installation on low quality floors. Min. Pad height of 95 mm only. Two stage short arms. Transmission with pre-tensioned high resistance chain with safety device.  

three stage short arms, being shorter when in closed position to provide asymmetric loading of large vehicles, and longer when fully extended: recommended for off-road vehicles.

kps 306 c 3 k / 3200 kg

arms suitable for quick drop-in extensions.

kps 324 c 2 / 2200 kg
kps 326 c 2 / 2700 kg
kps 327 c 2 / 3200 kg 

the best value for money - width between posts 2500mm - min. Pad height 95mm - two stage short arms - high resistance chain transmission.

kps 327 c 3 / 3200 kg

 three stage short arms, recommended for off-road vehicles.

for more details refer the pdf file.

Ce approved lift with low voltage controls

tubular structure made of 5 robot welded sections, nothing sturdier in the world

automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and descent

main nut and safety nut made of bronze (no plastic) with high resistance to wear, for greater safety

steel high resistance rolled screw to provide long life

automatic arm locking during lifting and automatic unlocking when the arm reaches the floor with self-locking conical design.

for more details refer the pdf file.

Two long 3-stage and two long 4-stage arms. The arms’ extensions slide on springmounted rollers, allowing easy use and a steady load.

KPN 250 LIKA / 5000 kg


Model equipped with four long arms: ideal to lift long wheel-base vans and easy lifting of cars.

Minimum pad height of 120 mm for the asymmetric lifting of armoured vehicles.

KPN 250 LIKT / 5000 kg

Model equipped with four extra long threestage arms: ideal to lift long wheel-base vans like Mercedes Sprinter and VW Crafter.

OPTIONS:

S 224 A3 (H=80mm)

S 224 A4 (H=140mm)

Spacers for Fiat Ducato, Peugeot Boxer, Citroën Jumper (4 pcs).

S 305 A9

Spacers for Mercedes Sprinter, VW LT and Ford Transit (2+2 pcs).

For more details refer the Pdf file.

Kph 370 . 32 / kph 370 . 42

baseless lift, allows easy access into the working area.

perfect synchronization between carriages regardless of load distribution.

equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture.

self-controlled lowering speed.

synchronization cables grant the levelling of the two carriages.

each column features a maintenance-free lifting cylinder.

adjustable height.

mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position.

automatic arm locking during lifting and automatic unlocking when the arm reaches the floor self-locking conical design.

very low pad, adjustable height.

kph 370. 32 / 3200 kg

three - stage short arms for asymmetric lifting of large vehicles.

min. Pad height 90 mm.

kph 370. 32 k / 3200 kg

arms suitable for quick drop-in extensions and other lifting accessories.

kph 370. 42 k / 4200 kg

three-stage short arms and two-stage long arms provide asymmetric lifting of vans and off-road vehicles.

kph 370. 42 lik / 4200 kg

model equipped with four long three-stage arms: ideal to lift long wheel base vans and easy loading of cars.

for more details refer the pdf file.

 electro-hydraulic lifts designed for recessed installation.

perfect synchronization between cylinders regardless of load distribution.

mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture.

self-controlled lowering speed.

all mechanical, hydraulic and electrical components manufactured in compliance with the respective european safety standard.

low voltage controls (24 v).

rav1110k / 3500 kg - version with lifting arms

lift with arms. Pads can be adjusted in height and are suitable for quick housing of extensions.

rav1150u / 5000 kg

lift for cars and vans, also with long wheelbase, up to an overall weight of 5000kg.

the carriages supporting the arms can be adjusted in width, in order to make the lift suitable for any application.

rav1120 / 3500 kg - platforms version

the minimum height from the floor guarantees easy and rapid positioning of the vehicle on the lift.

the limited space required by the lift improves safety of the working area. Ideal for mechanical repairs, tyre shops and rapid fit facilities.

it is also a good choice for service reception areas.

the run-up ramps can easily and quickly be blocked in horizontal position to serve as platform extensions.

min. Height: 95mm.

rav1125 / 3500 kg - version with lifting platforms

lift with extra-low platforms: only 60mm.

platforms can be adjusted in length.

rav1125m / 3500 kg - lift with adjustable track of pick up supports

lift with adjustable platforms: both in length and in width.

min. Height: 95mm.

rav1131 / 3500 kg - lift with runways

minimal platforms height 140 mm: easy access also for cars with low spoilers.

limited length.

rav1132 / 3500 kg

lifts for wheel alignment with front recesses for turntables and rear slip plates.

rav1140 / 3500 kg - special lift for body shops

arms can be shifted along two lateral supports to position the vehicle on the body shop bench.

distance between columns 2. 160 mm.

c models

versions with separate power unit.

ideal for wet areas like washing bays.

for more details refer the pdf file.

No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

all pivot points made with self lubricating bushings for long life.

mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

hydraulic levelling system by means of a patented synchronisation device assures constantly level lifting platforms regardless of weight distribution.

audible alarm during the final lowering phase.

every time the platforms reach the floor, the lift is perfectly levelled thanks to a patented valve.

ce approved lift with low voltage controls.

the best solution for a rational workshop:

space saving when lift is all raised,
completely free floor space when lift is fully lowered.

rav505if / 2500 kg
rav507if / 3000 kg
rav509if / 3500 kg

fixed length of platforms for easy use.

rav506i / 2500 kg
rav508i - rav508mi / 3000 kg
rav510i / 3500 kg

extensible platforms to reach pick up points of the more demanding vehicles.

rav510 / 3500 kg - above ground version

when the lift goes up the run up ramps move to the ideal position to allow easy access.

rav520 nisi / 3000 kg - smart-approved lift

ravaglioli’s solution to lift city cars, micro-cars, but also normal passenger cars.

the recessed installation and the wheel free lift integrated in the platforms ensure a rational use of the working space.

for more details refer the pdf file.

The evolution of rav scissors lifts.

ideal for space saving.

the best alternative to recessed installation.
design features

no cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

hydraulic levelling system, by means of a patented synchronisation device, assures constantly the level of the lifting platforms regardless of weight distribution.

all mechanical, hydraulic and electrical components are manufactured in compliance with the respective european safety standard.

low voltage controls (24 v).

controlled speed during initial lifting and final lowering phase.

audible alarm during the final lowering phase.

all pivot points made with self lubricating bushings for long life.

rav516nl / 2500 kg
518nl / 3000 kg

the minimum height from the floor guarantees easy and rapid positioning of the vehicle on the lift.

the limited space required by the lift improves safety of the working area.

ideal for mechanical repairs, type shops and rapid fit facilities. It is also a good choice for service reception areas.

rav518t / 3000 kg
rav520l / 3200 kg

extra low version. The lift is an ideal choice for low ground clearance vehicles of all types and in particular for extra low spoilers.

the lift is strongly recommended for vehicles with variable height, or damaged suspensions.
recessed versions

the very low profile of the lift allows recessed installation even in special conditions where it would not be possible to build pits deep enough for this type of lift.

Rav 1380 / rav 1400 / rav 1450 series

rav1450n / 2500 kg

the ideal lift for servicing tyres, brakes, suspension and bodywork.

this lift of the latest generation has the following features: electro-hydraulic operation, high loading capacity and elevated lifting height, rapid cycle times.

it guarantees the user maximun safety and practical and convenient usage.

* a mechanical levelling system assures constantly level lifting platforms regardless of weight distribution.
* all components manufactured in compliance with the european safety standard.
* low voltage controls (24 v).
* all pivot points fitted with self lubricating bushings for long life.

rav1450na1

portable lift kit.

rav1400b / 2700 kg
rav1400bp / 2700 kg

lift for tyre service, easy to install and to operate.

available with electro-hydraulic or air-hydraulic (p version) operation.

the robust structure, complying with european standard, guarantees lifting in total safety for cars and light commercial vehicles.

maximum pressure valve to protect against overloads.

all pivot points fitted with self lubricating bushings for long life.

the long run up ramps allow easy access onto the lift and the positioning of the lifting arms also for low profile cars.

equipped with 4 pivoting arms, allows easy lifting of large size vehicles or off-road vehicles with narrow chassis.

the arm locking device engages automatically, thus ensuring the stability of the loaded vehicle.

rav1380 / 2500 kg - pneumatic lift

the traditional lift for tyre service workshops, easy to install both indoor or outdoor.

mobile run-up ramps to allow on the car balancing.

automatic locking latches for safe operation.

maximum pressure valve to protect against overloads.

minimum height of only 90 mm, for optimum loading of sports cars, avoiding contact between underbody and lifting platform.

for more details refer the pdf file.

pantograph lift with foot-operated hydraulic pump (kp1394) or with airhydraulic pump (kp1394p).

lifting height of 800mm.

the particular design of the run-up ramp allows easy rear wheel removal.

mechanical locking device for absolute safety when lifted, with automatic unlocking before descent.

the lift can be supplied either with manual vice (kp1394a1) or with pneumatic vice (kp1394a2) to block the front wheel.

for more details refer the pdf file.

all pivot points made with self lubricating bushings for long life.

ce approved lift with low voltage controls.

mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

no cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

hydraulic levelling system by means of a patented synchronisation device assures constantly level lifting platforms regardless of weight distribution.

every time the platforms reach the floor, the lift is perfectly levelled thanks to a patented valve.

minimal platforms height 155mm: easy access including cars with low spoilers.

limited length.

for more details refer the pdf file.

The best solution for a rational workshop:

• space saving when lift is raised
• obstacle free floor space when lift is fully lowered.

No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

All pivot points made with self lubricating bushings for long life.

Platform surface in ribbed anti-slip steel plate.

Audible alarm during the final lowering phase.

Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

Hydraulic synchronisation of the platforms, independently from the load distribution, by means of:

1. self-regulating device
2. patented start-up valve

the best solution for a rational workshop:

• space saving when lift is raised,
• obstacle free floor space when lift is fully lowered.

no cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

audible alarm during the final lowering phase.

all pivot points made with self lubricating bushings for long life.

mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position.

hydraulic levelling system by means of a patented synchronisation device assures constantly level lifting platforms regardless of weight distribution.

every time the platforms reach the floor, the lift is perfectly levelled thanks to a patented valve.

ce approved lift with low voltage controls.

Hydraulic cylinder perfectly protected inside the fixed platform.

High-resistant, galvanised and pre-stretched metal cables.

Large-diameter pulleys with self-lubricating and maintenance-free bushes.

Adjustable platform to accomodate different vehicle tracks and optimised access to vehicle underside.

Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables.

Mechanical, electrical and hydraulic safety devices in compliance with the CE standard.

 

Main technical features

• The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected.
• High-resistant, galvanised and pre-stretched metal cables.
• Large-diameter pulleys with self-lubricating and maintenance-free bushes.
• Adjustable platform to accomodate different vehicle tracks and optimised access to vehicle underside.
• Automatic mechanical back-up safety devices (every 100 mm) with pneumatic release allowing stationary operation with unladen cables.
• Immediate-triggering safety stud devices in case a cable slackens or fails.
• Automatic anti-toe trap alarm during final stages of lift descent.
• Mechanical, electrical and hydraulic safety devices in compliance with the prevailing standard for CE marking.
• Low-voltage (24V) electrical system with control circuit.

For more details refer the Pdf file.

perfect level

the motors are inter-connected mechanically by line shafting and bevel gear boxes in oil bath to ensure the perfect level of the platforms and balanced load on motors regardless of vehicle position.

only one adjustment is made during the installation, never during operation as there are no parts subject to yielding or lengthening such as cables and load bearing chains.

ce approved lift with low voltage controls.

motor protection by thermal relay is provided to prevent burning out in case of overloading or lack of one phase.

two lifting screws in each column (kp440e - kp440ne).

 

total safety

main and safety nut assembly.

mechanical safety stop.

upper and lower limit switches.

safety micro-switch in case of main-nut failure.

bevel gears in oil bath.

automatic lubricati on of main and safety nuts and spindles is achieved by a plunger pump, one in each column, which ensures positive lubrication every time the lift is raised thus ensuring long life and smooth running.

a safety switch automatically stops motion should the lift encounter a solid obstacle during lowering.

for more details refer the pdf file.

the complete ravaglloli program of electromechanical mobile column lifts:

• 4 models with capacities ranging from 3 to 10 tonnes per column.
• 2 versions: indoor and outdoor installation.
• 3 configurations: 4, 6 or 8 columns.
• u type: with universal carriage for fitting of customized pick-up adapters for use in special conditions such as lifting of rolling stock.
• c type: with separate control unit.

design features

• ip65 - lifts for outdoor installation.
• electro-hydraulic operating lifts.
• equipped with safety valve to prevent overloading and in case of hydraulic pipe fracture.
• self-controlled lowering speed.
• mechanical safety latch with automatic engagement and hydraulic release ensuring maximum safety when lift is in parking position.
• rollers for carriage movement fitted on selflubricating bearings requiring no maintenance.
• warning light when the lift is in parking position.

Pneumatic scissor wheel-free jack

• Maximum pressure 10 bar
• Translation device on elastic rollers.
• Automatically-engaging and pneumaticrelease mechanical lock device.
• Two-hand "deadman" lowering control.
• Safety valve in case of air-pipe breakage.
• Maximum pressure valve and pneumatic feed filter.

For more details refer the Pdf file.