Model: X Model

These modified sine wave inverters perform adequate for general home lighting and computer use. These inverters have wide input range (120V-270V) or computer compatible (180V-260V). This can be selected by soft On/ Off switch at the front panel. The charging current and algorithm is designed in such a way to preserve the water content of the battery and prolong the battery life. We also manufacture Solar enabled X model inverters which is having PWM solar charge controller in built. User can get the benefit of both the solar energy and mains utility whichever is available. Some of the models have Interactive solar charging where a main charging is automatically adjusted giving preference to the solar current.

Key Features:

• Input Window: Wide/ narrow selectable
• Output: Modified sine wave
• Input Frequency: 40-60 Hz
• Output Frequency: 50 Hz
• Output Voltage: 220V compatible
• Charging: CC-CV-Boost/Float
• Protection: Overload low battery discharge
• Interface: Both LCD/ LED optional

Other Features:

• Charging Circuit Failure
• Mosfet Circuit Failure
• Feedback Circuit Failure

Model: Y Model

Our Y model inverters are true sine wave inverters with lesser THD. This finds the application in ac induction motors, household lighting, computers, music systems and many more that can be run from mains utility. These inverters are equipped with efficient SMPS charging for efficient battery charging with lesser units consumed from mains utility. This model will be available both with LCD interface and LED interface.

Key Features:

• Input Window: Wide/ narrow selectable
• Output: True sine wave
• Input frequency: 40-60 Hz
• Output Frequency: 50 Hz
• Output Voltage: 220V +/- 2%
• Charging: CC-CV-Boost/Float
• Interface: Both LCD/ LED optional

Other Features:

• Overload
• Low Battery Discharge
• Mosfet Circuit Failure
• Feedback Circuit Failure

We manufacture Offline UPS ranging from 600VA to 3KVA for computer application. Our UPS is having modified sine wave output with active snubber filter. Equipped with good RF and spike filter these UPS finds application in Offices, Factories, Colleges, Universities and institute where low cost solution of UPS is required for long hour backup.

Key Features:

• Input: 140V –270V AC
• Input Frequency: 40 Hz to 60 Hz
• Output On Mains: 220+/- 6%
• Output On Battery: 220 +/- 2%
• Charging: SMPS charging
• Charging Algorithm: CC-CV-Boost-Float
• Protection: For Overload, Low Battery
• Indication: Both LCD/ LED type available with fault indications

Solar Charge Controllers - SP Series

Key Features:

• Operating Current: 10A
• Operating Voltage: 12V/24V
• Optional Dawn/ Dusk output
• Optional Timer facility
• PWM charging for better power transfer from SPV panel to battery
• Early Low battery alarm when battery voltage is less than 11.3V
• Low battery cut when battery voltage is less than 11.0V
• Electronic Blocking (To protect against the reverse polarity connection of PV panel and prevent current from battery to panel at night time)
• Built in microprocessor for efficient PV charge control
• Temperature compensation for better battery charging for various climate and terrain
• Battery reverses polarity protection with fuse
• 3 LED indication systems for system and battery status
• Efficient Over charge and deep discharge protection
• Electronic overload protection avoiding blowing of fuse except in reverse battery
• Short circuit proof on load side
• Multi level overload protection

Solar Charge Controllers - SPL Series

Key Features:

• Operating Current: 20A-100A Expandable types
• Operating Voltage: 24V-110V (optional)
• Optional Dawn/ Dusk output
• Optional Timer facility
• PWM charging for better power transfer from SPV panel to battery
• MPPT algorithm implemented for efficient charging
• Electronic Blocking (To protect against the reverse polarity connection of PV panel and prevent current from battery to panel at night time)
• Built in microprocessor for efficient PV charge control
• Temperature compensation for better battery charging for various climate and terrain
• Battery reverses polarity protection with fuse
• LCD with backlight indication systems for system, battery status and faults
• Efficient Over charge and deep discharge protection
• Electronic overload protection avoiding blowing of fuse except in reverse battery
• Multi level overload protection
• System setting programmable through Key pads on front panel
• RS232 port available for System setting and data logging

We manufacturer Industrial Grade Chargers, which find its application in Hydropower plant, Sub-stations, and factories.

Charger Type	Isolated Float cum Boost Charger with DCDB
AC Input	440V +/- 15%
AC Input frequency	50 Hz
Output Voltage	Normal 48V/110V Float Adjustable from front panel to Suite the Battery
	Boost Adjustable from front panel to suit the Battery
Output Current Limit Battery Charging Current Power Conversion Device	50A/70A/110A as Required Adjustable to Suit the Battery Three Phase full Wave Controlled Rectifier PWM Active Rectification
Voltage Regulation Efficiency Ripple Control Protection and Switch Gear	<1% for given input range >80% < 3% with battery connected Micro Processor Controlled Input- TPN MCB Output- DP MCBs for load Battery- DP MCB Capacitor- HRC fuse Thyristor- Semiconductor fuse
Meter and Indication	LCD screen to display various status and Errors.
Equalization (Manual and Automatic)	Frequency and duration of equalization are programmable through menu.
Earth Fault Detection	Adjustable and can be enabled or disabled from front panel menu.
Diode Drop	Automatic to lower the load voltage during Boost charging or Equalization charging.

We manufacture Solar as well as mains driven VSAT Power supply to use in communication.

Key Features:

• AC Input Range: 80V to 280V AC
• DC Output: 24V/5A
• Low ripple at output below 0.5% on full load
• High low voltage protection on output
• LCD display for monitoring and status display
• External backup facility for longer backup with 5A charging current
• Robust design with IP51 covering
• Double conversion design that eliminates all the spikes from the mains to DC output

We manufacture rate displays that can be used for Banks, Shops and Moneychangers. These displays are completely customized and will be manufactured only against the customer requirement. Simple thin wall mounted these display have interface TCP/IP or RS 232/485 to interface.

Key Features:

• Operating Voltage: 220V
• Battery Backup: Present
• Display Segment Sizes: 1” RED
• Data Interface: RS232/485 or TCP/IP through computer Interface
• These displays have built in RTC for time keeping
• Internal timer can be used to automatic ON/OFF the system in the required days and hours