Industrial Instruments

Digital Shore Durometer, Shore Hardness Tester, Rubber Harness Tester

Shore A Durometers: Designed for testing various rubber, elastomers, leather, wax and plastic products;Shore D Durometers: Designed for testing the hardness of hard rubber,such as thermoplastic plastics, bowling, plastic floor Complied with ASTM D2240, ISO/R686, DIN 53505, and JIS R7215 Specifications Shore A:

• Measuring range: 0-100 Shore A units

• Depth of indentation: 0 - 2.5 mm ( the testing material has to be thicker than 6 mm)

• Indentor: Flat Cone Point 35°

• Measuring force: 0.55 - 8.065 N

• Test pressure: 12.5 N

• Weight: 200 g (net); 300 g (gross)

• Dimensions: 115 x 60 x 25 mm

Shore D:

• Measuring range: 0 - 100 Shore D units

• Measuring force: 4.45-44.5 N

• Depth of indentation: 0 - 2.5 mm ( the testing material has to be thicker than 6 mm)

• Test pressure: 50 N

• Dimensions: 115 x 60 x 25 mm

• Weight: 200 g (net); 300 g (gross)

fluxmeter is an advanced version of Model. It is a high speed precision instrument which integrates any voltages signal when applied to its input terminals. It is useful as a fluxmeter, gaussmeter and voltage integrator and used in application such as perimeters hyseresis loop tracers, magnetic field surveyors, production test equipment and many other applications.

Model is complately solid state which offers dependable low maintenance service. The read out is a three and a half digit LED panel meter, The four digit scale factor allows the user to get output in Maxwell turns, Maxwell or Gauss. Overall accuracy is ± 0.5% of full scale. Its magnetic sensitivity is 500 Maxwell to 1.999 x108 Maxwell turns. Output terminals provide a signal adequate for driving a X-Y recorder. This Feature is is useful when DC or AC hysteresis loop tracing is required. The instrument can be instantly reset to zero by means of a reset button conveniently located on the front panel.

Electronic fluxmeter measures magnetic flux cut a search coil and is widely used for general magnetic measurements such as magnetising force of permanent magnets. Flux of magnetic circuits in various type of electrical equipments, stay flux detection end voltage integration.

Measuring D.C. Magnetic fields, Ferro Magnetic Detectors, Field Surveyors, Production Test Systems, Voltage Integration, Hysteresis Loop Tracers, Magnetic Shielding Eftectiverross Tester.

Wireless Rain Gauges with Indoor and Outdoor Thermometer features a self-emptying rain collector with wireless transmission of up to 300 feet unobstructed!

This high-tech wireless rain gauge displays daily rainfall amounts, nine-day historical record and total rainfall. The unit has a high daily rainfall alarm and not only measures but also eliminates collected precipitation via the self-emptying rain collector.

The rain collector has a 4 inch diameter and stands 5.75 inches tall. Rainfall amounts are shown in inches or millimeters. The sleek black-and-silver LCD display unit lists indoor and outdoor temperature in one-half inch tall letters that are easy to read.

The wireless rain gauge comes with one THN122N remote temperature sensor with a transmission range of approximately 100 feet unobstructed. The four-line display console also shows current rainfall and total rainfall amounts.

Features:

• Rain gauge has an effective wireless transmission range of 300 feet (unobstructed)

• One-channel remote temperature sensor has an effective wireless transmission range of 100 feet (unobstructed)

• Digital base unit displays daily and cumulative rainfall amounts, indoor temperature and outdoor temperature

• Lists nine-day rainfall history and total rainfall

• Rainfall amounts measured in inches or millimeters

• High daily rainfall alarm

• Rain gauge tracks precipitation amounts

• Rain collector has 4-inch diameter and stands 5.75 inches high

• Rain collector powered by 2 AA batteries (included)

• Main console powered by 2 AA batteries (included)

• Remote temperature sensor powered by 2 AAA batteries (included)

• Wireless design makes measuring rainfall amounts simple

• Includes display console, one remote THN122N sensor and self-emptying collector

• Console features wall mount or tabletop option

Table Top instrument for measurement of d. c. magnetic fields is using Hall Probes. It has two ranges 20 K Gauss. A built in calibration facility ensures quick check of calibration. All the controls are mounted on the front panel and are clearly designed. An attractive plastic cabinet with carrying cum tilt bracket takes make the instrument light in weight and portable. LED display gives direct reading with 1 Gauss resolution on the 2k range and 10 Gauss resolution on the 20 K range. The unit is supplied with a Calibrated transverse Hall Probe of 50 mmx 1.5mm with the actual sensing area of 1 sq.mm from the tip

The control unit consists of a constant generator, an amplifier and seven segment LED display. A constant current is made to pass through the Hall probe, which when place in a magnetic field produces a voltage proportional to the magnetic filed. This voltage is amplifier circuit and output is read on a digital panel meter calibrated in kilo gauss.

Range Full Scale

0 to 2 and 0 to 20 Kilo Gauss

Accuracy

± 2 % full scale + one digit of the 20 K Gauss range.

Resolution

0.1 % of full scale.

Visual Display

3 ½ Digit LED DPM.

Power

240 V a. c. 50 Hz, 10 Watts

Size & Weight

210 mm x 95 mm x 225mm and 3 kgs approx

General purpose instrument for accurate flux density measurement on magnetic and electromagnetic components such as relays, dc motors, magnets, loudspeakers, etc. Very useful for on line production testing.

Battery operated Gaussmeter, A.C. field Gaussmeter, Low field Gaussmeter.

•  3 bars, one each for low and high levels and the third as a consent sensor.
•  four bars with the additional bar used for overflow measurement.

• Highly sensitive sensor based
• Inbuilt rechargable battery
• Measuring range : 0 mg/100ml to 200mg/100ml
• Memory 5000 test records with date & time
• Compitable to use computer keyboatrds for entering employee id & name
• Password management
• Edit printing header & footer
• 500 Testes with printout in a single charge
• Handy & portable

• Wide field eyepiece 10X (Paired) FOV 18mm

• Plan Achromatic 10X
• Plan Achromatic 20X
• Plan Achromatic 40X

• The reflected light illuminator has 6V-20W halogen lamp with intensity control knob.
• 6V/20W Halogen tungsten bulb

• Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC.) 5A, three pin socket with switch
  

• Screen -200 mm dia with cross line, 360" rotatable
• Magnification -l0x, 20x, 40x and 80x
• Work stage -150x 150 mm with X-4 movement of 25x25mm
• Micrometer -Zero adjustment, 25mm graduation, with least count 0.005mm
• Working Distance -30 mm approx under l0x magnification

• Water jacket made of Brass/S.Steel sheet duly nicked chromium plated with Bakelite Lid
• Stainless Steel Bomb Jacket Water Calorimeter Vessel
• Motorized heavy duly stirrer for uniform Circulation Briquette
• Pet tel Press heavy duly Firing unit with illumination
• spanners, magnified glass with nickled nichrome wire & Cotton reel
• Gas Releasing Valve
• S.Steel crucible
• Full feature digital controller & Safety device

• Petroleum Industries / Department Coal industries / Department Educational Institute & Research Lab.
  

• Housing Material :Brass/ S.Steel duly Nickled Chromium plated water jacket S.S vessel S.S. Bomb, Water Vessel
• Optional:Oxygen Cylinder
• Power Consumption:220/230V, AC Supply Single Phase ±10% 50 Hz
• Duty Cycle :Continuous

The control unit consists of a constant generator, an amplifier and seven segment LED display. A constant current is made to pass through the Hall probe, which when place in a magnetic field produces a voltage proportional to the magnetic filed. This voltage is amplifier circuit and output is read on a digital panel meter calibrated in kilo gauss.

General purpose instrument for accurate flux density measurement on magnetic and electromagnetic components such as relays, dc motors, magnets, loudspeakers, etc. Very useful for on line production testing.

Battery operated Gaussmeter, A.C. field Gaussmeter, Low field Gaussmeter.

• Warm up time : less than 20 sec. (typical). • Auto adjust / reset, with reset button

• Illumination button for use in dark (Auto shut off after 10 seconds)

• Power source : 1.5V Alkaline (“AA” size) x 3. and 12 VDC adapter.

• Accuracy : 15% @ 0.01 % BAC • Blowing time : 4 ~ 5 sec. continuously.

• Automatic switch off after 30 sec. • Removable mouthpiece, easy to clean and replace. CE approved.

• Specially designed equipment to determine tension of moving yarn in knitting & weaving machines.
• Latest model with sophisticated design.
• Available in different capacities (2-25g,sensitivity 1g/5-50g, sensitivity 2g/10-100g, sensitivity 5g).
•  Portable & handy can be carried anywhere.
•  Smooth precision-engineered mechanism.
•  Simple mechanism & easy operation.
•  Duly packed in wooden box for safety & easy transport.

• For calibration of Process Instruments and Systems for various industries such as Cement, Chemicals, Dye stuff, Paints, Drugs, Pharmaceuticals, Sugar, Paper, Glass, Food Industries, Steel, Synthetics, Automobiles, Airconditioning & Refrigeration, etc..
• As fault finding tool.
• Quality Assurance tool for ISO 9000 companies.
• Use as multimeter with Limited facility.

• Hand held, Battery operated, Portable, Source and Sink for mV, mA, and RTD.
• RTD, PT-100 display is directly in terms of temperature In Deg. C.
• Test facility to confirm stabilized Display and Circuit.
• Typical Accuracy 0.1%
• Battery low indication.
• Industrial grade, low resistance Rotary Selector Switch for parameter selection.

The Different types of rubber hardness tester include

• Shore-A Digital Rubber hardness tester
• Shore-A Analoug Rubber hardness tester
• Shore-D Digital Rubber hardness tester
• Shore-D Analoug Rubber hardness tester

Measuring D.C. Magnetic fields, Ferro Magnetic Detectors, Field Surveyors, Production Test Systems, Voltage Integration, Hysteresis Loop Tracers, Magnetic Shielding Eftectiverross Tester.

sample to b#> drawn from up to ^fi oamplirwj pftinte to provide fact^- and

accurate measurement results, even over wide concentration ranges.

sq.mm from the tip.

The control unit consists of a constant generator, an amplifier and seven segment LED display. A constant current is made to pass through the Hall probe, which when place in a magnetic field produces a voltage proportional to the magnetic filed. This voltage is amplifier circuit and output is read on a digital panel
meter calibrated in kilo gauss.

Specification :

General purpose instrument for accurate flux density measurement on magnetic and electromagnetic components such as relays, dc motors, magnets, loudspeakers, etc. Very useful for on line production testing.

• Wart Thermal Imagers
• WaW Heat Spy Intra Red "Thermometers
• Wain Heat Prober piatnum Rid /thermocouple Thermometers
• Wahl Calibrators
• Wahl Dipstick Thermometers tor Ferrous/ non Ferrous Molten Metals
• Wahl Temp Plate Oecals

How to use Rat Bait Station -

• Place Rat bait station indoors or outdoors, in areas frequented by rodents.
• Mix rodenticides in the bait (Usually Rodents tend to eat more bait that is placed in bait stations than keeping it outside. Rats and mice feel secure in a bait station, encouraging them to eat more bait per visit.)
• When used in warehouses or around perimeter of food processing plants, place a Bait Station every 15 to 20 feet for severe or continuous rat infestations, less for light infestations.
• Allow rats to eat and get killed.

Features

•  Rat bait stations protect your rodenticides from moisture, dust or other contaminating elements while keeping rat baits out of reach of non target animals.
• These rodent baiters keep your bait fresh while providing a prime feeding station where Roof Rats, Norway Rats and mice consume your rodenticides.

Rat Bait Stations are best suitable for commercial godowns, and outdoors, factories.

Instruments :

Fuels : Natural Gas, LPG, Light Oil, Heavy Oil & User Defined

Pressure Ranges : mbar, kPa & in H2O. Data Storage : 10 sets of readings

Data Logging : 400 sets of readings on ‘Timed Interval Logging’

Time & Date : 24 Hour Real Time Clock

Flue Temperature Probe :

Construction : Pistol Grip with Stainless Steel Shaft

Hose Length : 2500mm Insertion Length : 200mm

‘K’ Type Thermocouple Accuracy : +0.3% fsd, +1Oc

• The system should be placed pointing to the area to be protected.
• It is also ideal to mount it on a wall corner 3 to 10 feet off the floor.
• Place unit on a table, shelf or counter and fix the transducers to the wall facing slightly down.

• Measuring range : 0.000~1.000mg/l BAC (or 0.000~0.200% BAC or 0.000~2.000).

• Recycle time : 30 seconds (typical)

• Power supply : 4* 1.5V” AAA” batteries, 12V AC/DC adaptor (Battery and adaptor not incursive)

• Back light • Display : photo dot matrix LCD • Accuracy : +1/-1 digit

• Mouth-piece : individually wrapped disposable w/moisture trap

• Temperature range : 0°C ~ 45°C.

Detects ferrous and nonferrous metals. Sensitivity is adjustable.

Current Consumption : Less than 3mA. Weight : 230g. (Without battery).

Dimension : 395mm (operation), 260mm(storage). Dia.

of Search Head : f140mm.

Detection Distance :

• One Rupee Coin : 7cm.

• Iron pipe-tube of f20mm : 12cm.

3.½ Digit LCD display. Range : Two Function, Micro Tesla and Mili Gauss : 20 micro Tesla x 0.01 micro Tesla / 200 mili Gauss x 0.1 mili Gauss (*1 Micro Tesla = 10 mili Gauss). Band width : 30Hz~300Hz. No. of Axes : Single Axis. Auuracy : +(4% + 3d) at 50/60Hz. Over Input : Display shows ‘1’. Sampling Time : Approx. 0.4 second. Battery : 9V DC. Power Current : Approx. DC 3mA. Operating Temperature : 0oC~50oC (32oF~122oF). Operating Humidity : <80%RH. Weight : 165g / 0.36LB (Including Battery). Dimenson : 131(H) x 70(W) x 25(D).

• Short-circuit loop measurement:
  - impedance measurement with 23A current (44A phase-to-phase) - short-circuit resistor R=10,
  - measurement range: 95...440V, frequency 45...65Hz,
• Short-circuit loop measurement with resolution 0,01, in distribution network without tiggering RCD (In30mA):
  - automatic calculation of short-circuit, detection of phase voltage and phase-to-phase voltage,
  - additional UNI-Schuko plug for automatic measurement, AGT adapter for 3 phase network measurement.
• Testing of general and selective RCD with the rated differential current of 10,30,100,300,500 and 1000mA. (Type AC, A and B).
• Measurement of insulation resistance:
  - with test voltage 250V, 500V, 1000V, 2500V,
  - measurement range up to 10G,
  - UNI-Schuko plug for insulation measurement,
  - automatic discharging after measurement,
  - automatic measurement of all resistences in 3,4,5-wire cables using optional adapter AUTO-ISO,
  - acoustic signals in 5sec intervals for insulation resistance characteristic,
  - safety measurement - protection against overvoltage.
• Measurement of earthing resistance.
• Bi-directional testing of PE wire continuity using 200mA current.
  - Autocalibration of test leads.
• Phase sequence testing.
• Memory is divided into 10 memory banks each of them containing 99 memory cells.
• Battery charge indicator.
• AUTO-OFF function.
• USB interface.

On a typical day in the school a students school activity starts with the first bell followed by a series of bellringing to notify the beginning and the end of various activities including teaching periods.

For this purpose generally the ringing of the bell is done manually. This results many a time in human error in ringing the bell at the right time.
Instead a microprocessor based electronic instrument can be programmed to activate and ring the bell at preset time for the entire day.
The instrument can also be programmed to cater to different zones in the school. Such an instrument is totally independent of any human intervention and works automatically once programmed.

Electronic Bell is such an instrument designed and developed to cater to the needs of a big school having different zones (wings) with different time table for each day. The program for the whole week can be stored in the instrument.
It is a portable instrument with the facility to connect bells in the three different zones.

The instrument has provision to ring the bells up to a maximum of twenty times in a day following a predetermined program.

All the parameters like the duration for which the bell rings at a time, the time duration between ringing of two bells etc are user settable and password protected.
In the case of an emergency or if desired there is provision to ring the bell manually overriding the preset program.

Iodine Value Meter Iodine number is a very

important characteristic of oil. It can be used for

differentiating the different grades of oil and can

also be used to infer adulteration or identifying

the oil, based on its iodine number. The present

method of determining the iodine value using

wet chemical analysis is very cumbersome and time consuming.

Measures Illumination with 3 Ranges. Ranges from 0 - 50 000 Lux. LCD display and Low Battery Indication.

Application: Usefull for Architects,Automobile Engineers, Construction Engineers, Welding,Painting Industries, Interior Designers,etc

Features:
1) An ideal partner tool for miter saws
2) Measures current angles, calculates miter & bevel settings
3) Digital readout displays
4) Versatile measuring tool, 4 tools in one Anglefinder, Compound Cut Calculator, Protractor, Level
5) Anglefinder Determines the exact angles of jobsite or workpiece, eliminating guesswork
6) Compound Cut Calculator Automatically determines the exact miter and bevel setings necessary to make each crown molding cut fit precisely.
7) Protractor precisely positions the workpiece or intended cut line at the desired angle
8) Level Built-in vertical and horizontal spirit levels, accurate to 0 +/- 0.05°
9) Hold Function To freeze measurements
10) Digital readout displays on front and back For easier use
11) Optional Leg Extension For accurately measuring hard-to-reach angles
12) Rugged construction for durability S

Specifications:
• Length 17"
• Weight (lbs.) : 2.6
• Vial Accuracy: +/- 0.05°
• Electronic Accuracy: +/- 0.1
• Readout Accuracy: +/-0.1°
• Measuring Range:  0° to 220°
• Battery Life: 100 Hours
• Leg Length: 16"
• Power: 4 AA 1.5V Batteries

Product introduction:
The product shown is to test the moisture by direct scooping in the grain. Featured with convenient operation, quick measuring process, value directly readable, and portable, it is an ideal instrument for purchasing grain and monitoring the storage procedure.

Feature:

- 6 % to 40 % moisture range on wood.

- 0 to 100% relative moisture value for Concrete and other non-wood material.

- 0.2 % to 50 % moisture range on gypsum.

- Designed to check the moisture level of wood, concrete, gypsum and other non-wood material.

- Microprocessor circuit assures maximum possible accuracy, provides special functions and features.

- Digital reading with large LCD display.

- Separate pin type moisture probe,easy operation & remote measurement.

- Records Maximum & Minimum reading with recall.

- Data hold .

- Auto shut off saves battery life.

- RS 232 PC serial interface.

- Heavy duty & compact housing case,designed for easy carry out & operation.

Easy to use
2) Easy to operate
3) Easy to read LCD display
4) Super slim, lightweight

Functions:
- Counts Steps & Aerobic Steps
- Displays duration of aerobic walk
- Displays distance walked
- Counts amount of calories and body fat burnt
- Memory for past 7-days data
- Time Display

The 4 in 1 digital Multi-Function Environment Meter has been designed to combine the functions of Sound Level Meter, Light Meter, Humidity Meter, and Temperature Meter. It is an ideal Multi-Function Environment Meter Instrument with scores of practical applications for professional and home use.
The Sound Level function can be used to measure noise in factories, schools, offices, airports, home, etc., checking acoustics of studios, auditoriums and hi-fi installations.
The Light function is used to measure illuminance in the field. It is fully cosine corrected for the angular incidence of light. The light sensitive component used in the meter is a very Stable, long life silicon diode.
The Humidity/Temperature is for use a humidity/semiconductor sensor and K type thermocouple.

Features:
1) 3 1/2 large LCD display with units of Lux, ºC,%RH and C & dB, A & dB indication.
2) Light measuring levers ranging from 0.01 lux to 20,000 lux.
3) Sound level range:
    A LO (low) – Weighting: 35-100 dB   
    A HI (High)- Weighting: 65-130 dB 
    C LO (low) – Weighting: 35-100 dB
    C HI (High)- Weighting: 65-130 dB
4) Resolution: 0.1 dB
5) Humidity measurement from 25%RH to 95%RH with 0.1%RH resolution and fast time response.
6) Temperature measuring levers ranging from – 20.0ºC~+750ºC/-4ºF~+1400ºF

Specifications:
- Display: Large 1999 counts LCD display with function of Lux, x10 Lux, ºC, ºF, %RH and dB, A & dB ,C & dB, Lo & dB, Hi & dB, MAX HOLD, DATA HOLD indication.
- Polarity:< 80% Automatic, (-) negative polarity indication.
- Over-range: "OL" mark indication.
- Low battery indication: The "BAT" is displayed when the battery voltage drops below the operating level.
- Measurement rate: 1.5 times per second, nominal.
- Storage temperature: -10ºC to 60ºC(14ºF to 140ºF) at relative humidity
- Auto Power Off: Meter automatically shuts down after approx.10 minutes of inactivity.
- Power:One standard 9V, NEDA1604 or 6F22 battery.

A simple Hand Hel meter monitoring :
- Wind Speed : KNT, BF, FPM, MS KMH.
- Temperature : Cel, Fahrenheit, -15~50oC (5~122oF),
- Windchill (WCL),
- Relative Humidity : 0~100%RH,
- Dew Point (DP),
- Heat index (HI),
- Barometric Pressure (BAR) : HPA (Mbar) 400~1100 and in Hg (11.8~32.5),
- Upcoming Storms : 0,-2h, -4h, -8h, -16h bar chart shows the development of air pressure over the last 16 hours, forecast future weather,
- Altitude (ALT) : Meter and Feet.

- Built in Alarm Function .
- Sealed precison thermistor and humidity sensor.
- Battery Low Indicator.
- Altitude Function and Specification : Range -600~1880Meter (-500~9000Feet),
- Response Time : in 15 minutes.
- Update current altitude in 1 minute.
- Resolution : 1 Meter or 3 Feet.
- Replaceable impeller : 33 O.D x 16 I.Dmm
- Power Supply : Lithium Battery (CR2032).

1) Measures angles in ° and inclines in % or mm/m
2) Direction arrows display the deviation to the horizontals or verticals
3) Robust due to aluminium housing
4) Automatic rotation of the measured values on the display when working overhead
5) Acoustic signal at 0° and 90°
6) Hold function to hold measurement results at the push of a button
7) Copy function for copying inclines and transferring them to another position
8) Slanted, easy-to-read display
9) 2 vials enable use as a spirit level
10) More carrying comfort and safety due to shoulder bag

Specification:
- Length : 120 cm
- Measurement range : 0 – 360° (4 x 90°)
- Electronics measurement accuracy : 0°/90° ± 0.05°
- Electronics measurement accuracy at 1°-89° : ± 0.2°
- Measurement accuracy, vials : ± 0.057° = ± 1 mm/m
- Power supply : 1 x 9 V 6LR61
- Operating duration approx. : 200 H
- Automatic deactivation facility, approx. : 5 min
- Weight approx. : 1,3 kg
- Width : 25 mm
- Height : 60 mm

Specification:
1) 6 Digit LCD Display.
2) Range 30 ~ 30,000 RPM.
3) Resolution 0.1 RPM.
4) Auto power off after 2 minutes with memory.
5) Accuracy : ± 0.01%.W

Specification:
- 5 Digits LCD display.
- Light Reflex Measurement.
- Range 10.00 to 99,999 RPM.
- Measuring Distance 50 to 300mm.
- Event counter with elapsed time.
- Max./Min./Hold : True Average.
- Auto Range RPM.
- Contact RPM and circumferential velocity measurements in one simple adaptor.
- Display : 5 digits 99999 counts.
- Sampling rate : 0.7 second (> 60rpm) >1 second (10 to 60RPM).
- Measuring Distance : 50 to 300mm.
- Range Selection : Automatic.

General Specification:
1) Battery: Four 1.5V battery (AA, UM3)
2) Time Base: 4.000MHz Quartz Crystal
3) Operating Temperature:0oC ~ 50oC ( 32oF~122oF )
4) Reflective light:Red LED
5) Size:6.8"(L) x 2.5"(W) x 1.4"(H) , 175mm(L) x 65mm(W) x 36mm(H)
6) Weight : 250g (including battery)

Features: 
1) High precision gasoline engine RPM measurement, measurement just clamp the Inductive Pick Up sensor to the high tension wire.
2) Secondary tach. measuring method, no matter what cylinder is.
3) 4 cycle & 2 cycle select switch, available the automobile engine, motorcycle engine, generator engine.
4) 0.05% accuracy, high precision.
5) Wide measuring range from 10 to 50,000 RPM.
6) Separate inductive pick up sensor.
7) Memory the last value, max., value, min. value.
8) Used the exclusive one chip Micro-Computer LSI circuit, crystal time base.
9) Durable housing case.

1) Micro-computer circuit design.
2) 5 digits.
3) 0.4” LCD with function announciation.
4) Range : 5 to 100,000 RPM.
5) Resolution : 0.1RPM
6) Accuracy: 0.05%.
7) Sampling Time : 1 second. 
8) Memory Call last max. / min. value stored.
9) Detecting distance : 50 -150mm.
10) Time Base:Quartz-Crystal.

- Measuring ranges : 5-19,999RPM, 0.05-1,999.9 m/min (0.2-6,560 ft/min).
- Resolution : 0.1 RPM (<1000 RPM), 1.0 RPM (>1000 RPM).
- Accuracy : +0.05% + 1 dgt.

• Application:
-  F type : For measuring the thickness of non-magnetic coating layers (aluminum, chrome, copper, ename1, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel)
- NF type : For measuring the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel).

Technical Specification :
- Measuring Principle : Magnetic Induction and Eddy Current.
- Measurement Range : 0~200um / 500um / 1000um / 2000um In Built Probe (Integrated Probe).
- Resolution : 0.1um (Under 100um) 1um (Over 100um)
- Accuracy : ±1~3%N or ±3um.
- Measurement Mode : Single.
- Data Output : RS232 Interface (Optional).
- Power Supply : 4x1.5v AAA(Um-4) Battery 2 Shutdown.

Features:
1) Allows simple, quick and accurate thickness measurement.
2) Thumb lever to lift spindle
3) Flat anvils made of ceramic
4) Bezel is adjustable for easy zero setting
5) Graduation 0.01mm, Range 0-10mm, Throat Depth 30mm
6) Accuracy ± 0.02µm, Measuring force 1.4N

• Application:
-  F type : For measuring the thickness of non-magnetic coating layers (aluminum, chrome, copper, ename1, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel)
- NF type : For measuring the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel).

Technical Specification :
- Measuring Principle : Magnetic Induction and Eddy Current.
- Measurement Range : 0~200um / 500um / 1000um / 2000um In Built Probe (Integrated Probe).
- Resolution : 0.1um (Under 100um) 1um (Over 100um)
- Accuracy : ±1~3%N or ±3um.
- Measurement Mode : Single.
- Data Output : RS232 Interface (Optional).
- Power Supply : 4x1.5v Aaa(Um-4) Battery 2 Shutdown.

The digimatic thickness gauge incorporate mitutoyo's popular IDC and IDs series digimatic indicators to provide error-free LCD readings as well as data output for spc analysis.

Features
• Wide range of applications with various types of measuring faces (on the spindle and anvil).
• 547-401 (547-400) is ideally suited for measuring thicknesses of paper, film, wire, sheet metal and similar materials.

MD-2G: 2 pins
MD-4G: 4 pins

Feature:
- Large LCD display

- Quick response

- Low battery display

- With data-hold button

Specifications:

Range: 5% ~ 40%

Resolution: 1%

Accuracy: +/- 1 %

Power: 9V (6F22) X 1

Case Color: Dark gray

Dimension: 70 x 126 x 29mm

Weight: Approx. 150g (including battery)

Packing: Gift Box With Nylon Carrying Case Inside

Features:

- Measure moisture content over range 9 % to 30 %.

- 9 material species groups memory, calibrations for about 150 different species of wood/timber are provided.

- Built-in self-calibration circuit.

- 0 to 50 manual temperature compensation setting.

- Microprocessor circuit.

- Records Max. & Min. reading.

- Data hold.

- Separate pin type moisture probe, easy operation & remote measurement.

- RS232 computer interface.

Features:
1) Large LCD display, easy to read.
2) Max. Hold function for stored the maximum value on display.
3) Frequency weighting networks are designed to meet the IEC 651 type 2.
4) Warning indicator for over and under load.
5) LCD display for low power consumption & clear read-out even in bright ambient light.
6) A & C weighting networks are conformity to standards.
7) Time weighting(FAST & SLOW) dynamic characteristic modes.
8) Used the durable, long-lasting components, including a strong,light weight ABS-plastic housing case.
9) AC/DC output for system expansion.
10) Build in adj. VR is available for easy calibration.
11) Small and light weight design allow one hand operation.
12) Condenser microphone for high accuracy & long-term stability.
13) Low battery indicator.

Specifications:
- Display - 18mm LCD 3 1/2 digits.
- Functions - dB (A & C frequency weighting), Time weighting(Fast, Slow), Max. hold, AC & DC output.
- Measurement Range - 3 ranges, 30 to 130 dB, input signal only.
- Resolution - 0.1 dB.
- Operating Temp - 0 degree Celsius to 50 degree Celsius
- Operating Humidity - Less than 80% RH
- Power Supply - 006P DC 9V battery(heavy duty type).
- Power Consumption - Approx. DC 6mA.
- Dimension - 205 x 80 x 35 mm.
- Weight - 280 g(including battery).

It uses microcomputer technology and the liquid crystal displays the moisture regains also the instrument has voice prompts, high resolution, large measurement range. It is a probe and host integration, highly integrated components, easy to operate. There is a certain precision, portable test water apparatus. It is can be applied to the South, the North acquisition or production of cotton, cotton storage, and cotton warehouse in inspection tour.

Main technical data:
Regain range  - Type BD-M5A: 9%~30%, Resolution 0.1%
                      - Type BD-M5C: 9%~30%, Resolution 0.1%
Test accuracy - Type BD-M5A: 9%~30%, accuracy±0.2%
                      - Type BD-M5C: 9%~30%, accuracy±0.2%
Alarm setting - Either within the test file can be set (0.5% as a binary file)
Voice prompts - Super Water prompt "excessive moisture regain,"
                      - Low voltage prompted "Please replace the batteries"
Display mode - The three figures LED
Power - DC voltage of 6V, 9V (4 / 6 5 # batteries), with intermittent power supply
Outline size - 400×150×100mm

Features:Perfect for outdoor enthusiasts on a budget, eTrex H comes with a high-sensitivity GPS receiver that locks onto satellite signals quickly and maintains accuracy — even in the toughest conditions. And just like the popular eTrex, this little yellow wonder combines an intuitive interface and a rugged exterior into a lightweight handheld that fits in the palm of your hand.
1)Enjoy Clear Reception-With its high-sensitivity, WAAS-enabled GPS receiver, eTrex H locates your position quickly and precisely and maintains its GPS location even in heavy cover and deep canyons. The advantage is clear — whether you’re in deep woods or just near tall buildings and trees, you can count on eTrex H to help you find your way when you need it the most.
2)Built for Adventure -You can operate your eTrex H with just one hand using five buttons, which are located on either side of eTrex H within easy reach of your fingers. Thanks to its bright yellow case, eTrex H is easy to find in your boat or backpack. And, eTrex H is IPX7 waterproof, so it can take an accidental splash or dunk in the water and still continue to perform.
3)Find It and Go - With eTrex H, your adventure can last and last — up to 17 hours on just 2 AA batteries. While you roam, you can store up to 500 way points in memory for easy retrieval. Just enter the point you want to go to, and eTrex H points you to your destination (no street or terrain maps). To get home, use Garmin's exclusive TrackBack® feature to reverse your track log and help you navigate back to your starting point.eTrex H: Lock onto the great outdoors.

Features:
1) Professional torque meter with 15 Kg-cm torque probe, full set.
2) 3 kind display unit : Kg-cm, Kg-cm, LB-inch and Newton-cm.
3) Peak value measurement.
4) Data hold.
5) Peak hold measurement .
6) High/Low resolution button.
7) Fast/Low sampling button.
8) Record Max. and Min. readings.
9) RS 232 computer interface.

Specifications:
- Display: 61 mm x 34 mm supper large LCD display.15 mm ( 0.6" ) digit size.
- Measurement: Torque value, peak hold, data hold, Max. & min. value.
- Display unit: Kg-cm/LB-inch/Newton-cm.
- Sensor: Exclusive torque sensor.
- Circuit: Exclusive microcomputer circuit.
- Data hold: Freeze the desired reading.
- Peak hold To hold the peak value.
- Memory: Maximum & Minimum value.
- Power off: Auto shut off, saves battery life, or manual off by push button.
- Power supply: Alkaline or heavy duty type DC 9V battery, 006P, MN1604 (PP3) or equivalent.
- Power consumption: Approx. DC 20 mA.
- Weight: Meter 230 g ( 0.50 LB ). Probe 600 g ( 1.32 LB )
- Chuck head size: 1/2 to 20 UNF, 1.5 to 13 mm,
- Dimension Meter : 180 x 72 x 32 mm ( 7.1 x 2.8 x1.3 inch ).
                  Torque probe:Round 48 mm Dia. x 160 mm.

• Single color LED display with 6-level leak alarm
• Tricolor display of battery voltage
• RESET key that can provide convenient and fast resetting function
• Real time sensitivity adjustment
• Adopts quality sensors that can detect slightly leaked halogen gases
• 14 inches (35.5cm) flexible stainless steel probe

Specifications

• Max Sensitivity: to halogenated refrigerants, 3gr/yr
• Battery operated. Battery life: 30 hours under normal conditions
• Working temperature: 0-52 degree
• Power supply: 3V DV (2 quality batteries)  
• Probe length: 35.5cm
• Reaction time: Instant   
• Resetting time: 2 seconds 
• Warm-up: about 6 seconds 
• Size: 22.9cm*6.5cm*6.5cm 

• Two Sensitivity positions, including our unique ScanMode
• Reset Button for instant re-calibration
• Detachable probe
• High efficiency pump
• Detects ALL Halogenated Refrigerants, including R-410A
• Constant Power Indication
• Carrying case and spare sensing tip included
• U.S. Patent #’s Re: 32,552; 4,282,521; 5,400,015

Specifications:

• Ultimate Sensitivity Less than 0.1 ounces per year (3 gr/yr)
• Power Supply:(2) 1.5V “C” Batteries
• Probe/Cord Length Probe: 14" (35cm) Cord = 36" (91.4cm)
• Operating Temperature:32°–125° F (0°–52° C)
• Warranty:One year warranty
• Battery Life:30 Hours (Alkaline)
• Size:7.75X3.20X12.00 inch
• Weight:"2.75 lb"

• Frequency Output: 40 KHz.

• Oscillator Circuit: 640 KHz crystal time base & divided by 16.
• Operating Temperature: 0 C to 50 C ( 32 F to 122 F )
• Operating Humidity: Less than 80% RH.
• Power Supply: DC 9V battery. 006P, MN1604 ( PP3 ) or equivalent, Alkaline or
• heavy duty type battery.
• Power Consumption: Approx. DC 7.5 mA.
• Weight: 122 g/0.27 LB ( included battery ).
• Size: 146 x 50 x 26 mm ( 5.7 x 2.0 x 1.0 inch ).
• Accessories Included Operational manual

• Detects Combustible Gases

• Including: Natural Gas,
• Methane, Butane, Propane(LPG),
• Gasoline, Diesel, and Kerosene
• Fits in shirt pocket
• Auto zeros
• Visual and audible alarm
• Responds instantly

Specifications:

• Sensitivity: > 1,000ppm combustible gas (Methane)
• Operating Temp: 32° to 104°F (0° to 40° C)
• Warm-up: 7-10 seconds
• Response Time: Instantaneous
• Battery: Two AAA
• Power Consumption: DC 20mA
• Battery Life: 3 continuous hours
• Overall Dimensions: 1.38” 5.0” x 0.75” (34.9 x 127 x 19.1)
• Weight: 0.30 lb. (0.14 kg.)

• Super-large 31 / 2 (1999) digital LCD display with backlighting 

• Mini portable design, easy to use 
• Rapid sampling 
• Max / data maintained 
• Automatic shutdown 
• When the carbon monoxide concentration exceeds 200 PPM, the test will sound the alarm and show that the concentration of carbon monoxide

Specifications:

• Operating temperature
• Storage Temperature
• Operating humidity:0-99% relative humidity
• Measuring range:0 - 1000PPM
• Measuring resolution :1PPM
• Precision:5 percent or ± 10PPM
• Warm-up time :<2 seconds
• Battery: 9V ,NEDA 1604A
• Automatic shutdown:Within 15 minutes of operation that is no automatic shutdown
• Sensors:Stable electrochemical gas sensors
• Sensor life: Three years

  Detects all kinds of Halogenated GASES (Methyl Bromide). The unit responds to all halogenated GASES (with Chlorine,Bromine and fluorine included) • Single ColourLED display with 6-Level Leak Alarm. • Real time sensitivity adjustment.

• 14 inches (35.5cm) flexible stainless steel probe.

Specification and parameter :
 • Working Mode :  Continuous and no limit.
 • Reaction time : Instant.
 • Warm-up : about 6 sec.
 • Power Supply : 3VDC (2 quality batteries).

Personal Gas Monitors Specially designed pocket size instrument for Personal Protection ; Safety from the hazards of combustible and toxic gases.

Highly stable against zero drift and quick to respond to changes in target gas concentration. Continuously display gas concentration on an LCD display.

Two user settable alarm set points.
 
Available for SO 2 , O 2 , CO, NO 2 , NO, H 2 S, HCN, HCl, Cl 2 , H 2 , NH 3 , PH 3 , ETO, Combustible Gases (Explosimeter) and many other gases.

We have a range of Detectors & Monitors for various gases.Mail us your query & we will mail you the Best Model & competetive Rate.

• LED leak size indicators

• Two Sensitivity positions, including our unique ScanMode
• Reset Button for instant re-calibration
• Detachable probe
• High efficiency pump
• Detects ALL Halogenated Refrigerants, including R-410A
• Constant Power Indication
• Carrying case and spare sensing tip included
• U.S. Patent #’s Re: 32,552; 4,282,521; 5,400,015

Specifications:

• Ultimate Sensitivity Less than 0.1 ounces per year (3 gr/yr)
• Power Supply:(2) 1.5V “C” Batteries
• Probe/Cord Length Probe: 14" (35cm) Cord = 36" (91.4cm)
• Operating Temperature:32°–125° F (0°–52° C)
• Warranty:One year warranty
• Battery Life:30 Hours (Alkaline)
• Size:7.75X3.20X12.00 inch
• Weight:"2.75 lb"

• Frequency output: 40 KHz.

• Oscillator Circuit: 640 KHz crystal time base & divided by 16.
• Operating Temperature: 0 C to 50 C ( 32 F to 122 F )
• Operating Humidity: Less than 80% RH.
• Power Supply: DC 9V battery. 006P, MN1604 ( PP3 ) or equivalent, Alkaline or
• heavy duty type battery.
• Power Consumption: Approx. DC 7.5 mA.
• Weight: 122 g/0.27 LB ( included battery ).
• Size: 146 x 50 x 26 mm ( 5.7 x 2.0 x 1.0 inch ).
• Accessories Included Operational manual

Applications for Ultrasonic transmitter ( GS-400 ) cooperate with the Ultrasonic Leakage Detector ( GS-5800)
For more details please be free to email us.

• Super-large 31 / 2 (1999) digital LCD display with backlighting 

• Mini portable design, easy to use 
• Rapid sampling 
• Max / data maintained 
• Automatic shutdown 
• When the carbon monoxide concentration exceeds 200 PPM, the test will sound the alarm and show that the concentration of carbon monoxide

Specifications:

• Operating temperature
• Storage Temperature
• Operating humidity:0-99% relative humidity
• Measuring range:0 - 1000PPM
• Measuring resolution :1PPM
• Precision:5 percent or ± 10PPM
• Warm-up time :<2 seconds
• Battery: 9V ,NEDA 1604A
• Automatic shutdown:Within 15 minutes of operation that is no automatic shutdown
• Sensors:Stable electrochemical gas sensors
• Sensor life: Three years

• Measure CO from O to 999ppm

• Displays the max. CO reading in PPM since power on
• Displays in hours and minutes, time elapsed since power on

Specifications:

• Size: 38.5mm x 152.0mm x 70.0mm
• Weight: 181.5g
• Sensor: 2 year life Electrochemical
• Range: 0 to 999ppm
• Accuracy ±3ppm or 5% whichever is greater
• Temperature: 32°F to 104°F (0°C to 40°C)
• Batteries: 2 x 1.5v size AA Alkaline
• Operating Time: 300 hours

• Measure CO from O to 999ppm
• Displays the max. CO reading in PPM since power on
• Displays in hours and minutes, time elapsed since power on

Specifications:

• Size: 38.5mm x 152.0mm x 70.0mm
• Weight: 181.5g
• Sensor: 2 year life Electrochemical
• Range: 0 to 999ppm
• Accuracy ±3ppm or 5% whichever is greater
• Temperature: 32°F to 104°F (0°C to 40°C)
• Batteries: 2 x 1.5v size AA Alkaline
• Operating Time: 300 hours