Nutech Air Projects

We are offering to our clients superior quality of Refrigeration Type Gas/Air Drier that can be programmed to run automatically for a chosen cycle. It is used to ensure low humidity levels inside generators and it also enhances prevention of stress and corrosion on rolor retaining ring. The features of our range that makes its superior over the conventional driers are as follows :

• Highly effective in taking away moisture from gas
• Only 8hrs. Per day service is sufficient
• No need to replace or regenerate silica gel
• Consumes less energy

Cracked Ammonia (NH3) is the mixture of H2 & N2 gas. It is widely used in heat treatment furnaces. We supply low & high pressure ammonia crackers with molecular sieves purifier to meet the specific need of our customers.

Salient Features :

• Fully automatic skid mounted unit with thyrister operation
• Expansion bellows to safe guard the life of the retorts
• Un-cracked ammonia in final product gas guaranteed for Zero PPM
• Ceramic fiber insulation for efficient cracking of the ammonia gas

Nutech Air Projects suppliers of gas analyzer instruments, user friendly hand held gas detectors. The detectors are low cost, light weight and are battery operated. These units has been indigenously designed for Indian conditions. These analyzers are broadly classified as 'Combustible Gas Monitors'
Also known as Toxic Gas Detectors or Multi Gas Monitors.

Salient Features :

• Accurate, Safe, Reliable Portable and Easy to use
• Digital Display of ppm, %age, LEL
• Calibration reminder after 300 hr's of operation
• Temperature compensation
• Available for Toxic and Flammable Gas
• Smart Sensor recognition
• Optional internal Pump is available for drawing the Gas from remote location
• Upto 3 Detectors can be incorporated in One Instrument
• Calibration Gas supplied along with Instrument
• Inexpensive

EXO-gas generators produces protective atmosphere for heat treatment furnaces. Lean Exo-gas or Rich Exo-gas is produced simply by changing air/fuel ratio. Lean Exo-gas generators are suitable for non-ferrous metals heat treatment whereas Rich Exo-gas generators are used for heat treatment of steel/brazing/annealing applications.

The gas mixing system works by metering three gas supplies into a common mixing tank. The mixture is then bubbled through alcohol in a tank within a small refrigerator which has been modified for safe operation in a flammable gas system. Because the gas flow, not the pressure, is regulated by the metering system, pressure switches have been installed to monitor the mixer outlet pressure and provide feedback to the flow-control system. The mixing, bubbling, and pressure control systems are all built into the same relay rack. They are collectively referred to as the Gas Mixing Station.

We offer a range of heat exchangers that are made of premium quality stainless steel-304, 316 and mild steel that are tested by our quality managers before using them in the production process. Durable in quality, our heat exchangers are widely used by our clients across the globe. Used to exchange heat from cooling to heating and heating to cooling, our products find their application in chemical industry. We are capable of offering our products in various capacities as per the specifications of the clients or as per the area of application.

Spares of nitrogen gas plant are : Two Way Change Over Valves, Solenoide Valves, Roto Meter, PRV, PHV, B2C Oxygen Sensor, B1 Oxygen Sensor, Pressure Switch, Pressure Gauge, Temprature Controller, Tempreature Gauge, Thermo Couple, RTD, Thermo Well, Copper Catalyst Palldium, Catalyst Zeolight Molucular Sieve, Ceremic Ball, Electric Heater, Filter Elements, Candle Filters Ceremic Candles Filters, Auto Dren Traps(ADT), Activated Carbon Ball Valve, Niddle Valve, Glove Valve, Control Valve, Shutoff Valve, 3 Way Went Valve.

Desiccants:

Desiccants are porous crystalline substances used to absorb moisture and solvent vapors from the airspace of insulating glass units. Some of the disiccants used in nitrogen gas plants are : Carbon Molucular Sieve(CMS) 13x, Molucular Sieve 4a, Molucular Sieve 5a, Molucular Sieve Activated Alumena.

We offer a comprehensive range of Nitrogen Purification System. We provide our product range in standard as well as customized specifications.

Silent Features :

• Easty to operate
• Low maintenance cost
• Customization based on desired Nitrogen purity

Applications :

• Steel Industry
• Petrochemical Industry
• Pharmaceutical Industry

We manufacture and supply finest quality pressure vessel which is widely used in chemical industries. Pressure vessels are boilers and storage tanks that contain liquids or gases and are designed to operate at pressures above 15 psig. Their application are :

• Provide heat treatment to different liquids under definite pressure
• Use of quality steel in their manufacturing
• Allows the pressure vessels to withstand stress and heat
• Sturdily constructed

The product can be customized as per the clients’ specific requirements.

We are manufacturers and suppliers of Hydrogen Gas Plant. Hydrogen gas is generated by PSA technology. We have in-house facility and expertise for manufacturing of various pressure vessels, reactors, adsorbers, columns, heat exchangers and tanks. We take pride in providing quality equipment for gas generation, gas drying and gas purification systems. These equipment can be skid mounted and may be operated through PLC. We have numerous satisfied customers across the globe spreading over wide range of industry.

Product Attributes :

• Flow rate 1 to 200 Nm3/hr
• N2 purity 91 _ 2% Pressure 3 kg/cm2g
• (psa) Dew point upto (-50) deg. c

Our PSA nitrogen gas plant produce nitrogen from atmospheric air and therefore the cost of nitrogen generation is minimal.

Salient Features

• Fully automatic
• Start-up by single push button
• Very compact skid mounted units supplied duly assembled from our factory
• Start-up time only 5-minutes to get nitrogen of desired purity
• No petroleum fuels required
• Only electrical power and cooling water needed for nitrogen generation.
• Life of carbon molecular sieves guaranteed for more than 10 years on continuous operation basis

Product Attributes:

• Flow rate 1 to 1500 Nm3/hr.
• N2 purity 95% to 99.9997 %
• Pressure Standard Dew point upto (-80) deg. c

The PSA Oxygen Gas Generation Plant consist of two absorption vessels and filled with zeolite molecular sieves are alternatively charged with compressed air to absorb the nitrogen.

Salient Features :

• Substantially lower operation cost
• Based on economical, reliable and proven technology