The Nutech ACV models F200 and F2200 are single chamber basic valves that incorporated a e-pies and diaphragam assembly. This assembly is the only moving part within the valve allowing it to open,close,or modulated as commanded by the pilot control system.
Model F200 : Gloe pattern single chamber basic valve. Model F2200 : Angle pattern single chamber basic valve.
these type of valves are designed to provide different combination of used for various types of functions like : control , pressre relief ,auto shutt off
these type of valves are designed to provide different combination of pilot arrangements that can be used for various types of functions like : on/off, pressure reducing, pressure relief.
three piece body to allow inspection and maintenance on all internal parts. Anti-static device, blow-out proof stem, solid ball. , lever-operator. Fire safe design, with virgin (pure) teflon seats. Sand casting body
high quality investment casting body and caps. Pressure temperature rating: 1000 psi (pn63)/450 deg. F 15% reinforced glass fibrous teflon seats, in- line repairable. Blow-out proof stem s/s 316. Adjustable stem packing. 100% tested air-under water at 100 psi (6 bars ) open & close position.
high quality investment casting body and caps. Pressure temperature rating: 1000 psi (pn63)/450 deg. F 15% reinforced glass fibrous teflon seats, in- line repairable. Blow-out proof stem s/s 316. Adjustable stem packing. 100% tested air-under water at 100 psi (6 bars ) open & close position.
nu-tech range of air operated gas booster pumps are designed to boost bottled gases such as air, nitrogen, helium, hydrogen* or methane* upto higher pressures. They can be used for pressure testing or for pre-charging accumulators and down hole tools. Being air operated they are inherently safe and can be used in fire hazardous areas.
the output pressure and flow generated by these versatile pumps can be infinitely varied by simply adjusting the air drive pressure and flow rate.
NU-TECH range of air operated gas booster pumps are designed to boost bottled gases such as air, nitrogen, helium, hydrogen* or methane* upto higher pressures. They can be used for pressure testing or for pre-charging accumulators and down hole tools. Being air operated they are inherently safe and can be used in fire hazardous areas.
The output pressure and flow generated by these versatile pumps can be infinitely varied by simply adjusting the air drive pressure and flow rate.
high pressure regulators is easy to install, adjust, inspect, and service in all piping arrangements. Typical applications include farm taps, field regulator applications, and high pressure industrial air or gases. Other features include.
inlet pressure : up to 700 bar (10000 psi) outlet pressure : up to 650 bar (9000 psi
end connection
¼” to 2” bsp / nptf screwed
application
water , oil gas , hydrogen , cng
high pressure regulators is easy to install, adjust, inspect, and service in all piping arrangements. Typical applications include farm taps, field regulator applications, and high pressure industrial air or gases. Other features include:
high quality investment casting body/bonnet. Pressure temperature rating: 200 psi(pn 16)/350deg. F inside screw and screwed bonnet, wedge disc, integral seat. Non-rising stem and hand wheel. 100% tested air-under water at 100 psi (6 bars )
high quality investment casting body/bonnet. Pressure temperature rating: 200 psi(pn 16)/350deg. F inside screw and screwed bonnet, wedge disc, integral seat. Non-rising stem and hand wheel. 100% tested air-under water at 100 psi (6 bars )
high quality investment casting body /cap. Pressure temperature rating: 300 psi screwed cap, lift-type disc, integral seat. 100% tested air-under water at 100 psi (6 bars ).
High Quality Investment Casting Body /Cap. Pressure temperature Rating: 300 PSI Screwed Cap, Lift-Type Disc, Integral Seat. 100% tested air-under water at 100 PSI (6 Bars ).
for gas services to domestic & industrial , specially designed for safe accurate first stage reduction on high pressure gas systems , for natural gas and all non-corrosive gaseous media, wide operational outlet pressure range, diaphragm casing can be rotated through 180° relative to body and can be positioned in any angle ,wide range of interchangeable orifices, without removing the body from the pipeline, precise and positive operation.
Valve function valve is fully open when inlet pressure is below shut-off control set point valve fully closes if inlet pressure exceeds shut-off control set point can be equipped with a limit swich for signalling an alarm
components main value bp30 relief control fixed orifice position indicator
accessories located as indicated isolation cocks
included as market y-strainer flow clean strainer limit switch
low pressure system can be protected from overpressure by spring – oprated valves. Weight – loaded valves or pilot-operated valves.
PRODUCT:- The seies 810 products is a very wide range of both pressure and pressure relief valve. Primarily designed for protecting low pressure storage vessels and tanks, as well as low pressure piping systems. They are designed to meet the requirements of ASME VIII and API 2000; many models also stisfy IMO and other marine regulations.
high pressure regulators is easy to install, adjust, inspect, and service in all piping arrangements. Typical applications include farm taps, field regulator applications, and high pressure industrial air or gases. Other features include.
one-stage pressure reducing valve,easy operation and maintenance suitable for natural gas and all non-corrosive gaseous media for industrial and chemical engineering applications
cast iron :- 250lb. Screwed, ½” through 2” 125lb. Flg. 1 ½” through 4” 250 lb. Flg. 1 ½” through 4” w. C. B :- 300 lb. Screwed, ½” through 2” 150 lb. Flg. 1 ½” through 4” 300 lb. Flg. 1 ½” through 4”
made from bar- stock material. Pressure temperature rating: 1000 psi 15% reinforced glassfibre teflon seats. Blow-out proof stem s/s 316. 100% tested air-under water at 100 psi (6 bars ) open & close position.
High Quality Investment Casting Body /Bonnet. Pressure temperature Rating: 200 PSI 350deg.F Screwed Bonnet, Integral Seat. Rising Stem and Hand Wheel. 100% tested air-under water at 100 PSI (6 Bars ).
high quality investment casting body /bonnet. Pressure temperature rating: 200 psi 350deg. F screwed bonnet, integral seat. Rising stem and hand wheel. 100% tested air-under water at 100 psi (6 bars ).
Material Movell India Private Limited, Noida Manufacturing and supplying valves such as industrial valves, ball valves, flow control valves, pipe plastic body ball valves, horizontal pipe plastic body ball valves and vertical pipe plastic body ball valves.
Kothari Enterprises Private Limited Deals in manufacturing, exporting and supplying valves, air valves, foot valves, non return valves, sluice valves and Cast Iron Sluice Valve.
Processing...
