We are offering wide range of gate valve and industrial gate valve. These products are widely used in chemical and process industries, refineries, petrochemicals & fertilizer plants.

Features

• Outside screw and yoke construction
  
• Angle and Y-type design available
  
• Flanged end or Buttwelding end
  
• Valves provided witfi back seating arrangement
  
• Regulating, guided and sort seated plugs are available
  
• Extended bonnet provided for low temperature and cryogenic services (cold box and non-cold box applications) to conform to requirements of BS 6364
  
• Specially designed die formed graphite packings, controlled clearances between stem, gland and bonnet bushing for guaranteed low emissions meet 100 ppm maximum fugitive emission levels.
  
• Renewable, seal welded seat ring or integral seal (cast S.S. only) available
  
• Deep stuffing box - with lantern ring optional
  
• Self aligning two piece gland
  
• Anti-friction ball thrust bearing in yoke sleeve for higher sizes and classes
  
• Locking arrangement optional
  
• Optional gear, electric or pneumatic actuator available
  
• Meets design requirement of ASME B16.34/BS 1873 and testing requirement of BS 6755
  
• Flanged end dimensions conform to ASME B16.5 / API 605 / BS 3293 / DIN
  
• Ring joint facings available in higher classes
  
• Buttwelding end dimensions conform lo ASME B16.25
  
• Face to Face and End to End dimensions conform to ASME B16.10 / BS2080 / DIN

Materials
 

	Part Name	Material
1	Grub Screw	Carbon Steel
2	Hand Wheel Nut	Carbon Steel
3	Hand Wheel	Malleable Iron / Cast Steel / Ductile Iron / Fabricated Steel
4	Eye Bolt and Nut	Forged Carbon Steel
5	Cross Bolt and Nut	Forged Carbon Steel
6	Yoke Sleeve	A 439-D2 / Al. Bronze, BS 1400, AB2C
7	Grand Flange	Carbon Steel
8	Gland Bush	Stainless Steel
9	Back Seat
10	Plug Nut
11	Spindle	See Page 37 for
12	Seat Ring	Trim Materials
13	Plug

	Part Name	WCB	LCB	WC6	WC9
1	Stud and Nut	A193 Gr B7/A194 Gr 2H	A320 Gr L7/A194 Gr 4	A193 Gr B16/A194 Gr 4/7	A193 Gr B16/A194 Gr 4/7
2	Gland Packing	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
3	Gasket	Spiral Wound / Soft Iron	Spiral Wound / Soft Iron	Spiral Wound / SS304	Spiral Wound / SS304
4	Bonnet	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9
5	Body	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9

We manufacture 3 PC ball valves that are manufactured from premium quality steel. They comprises of standard stem for forming an integral part of valve and providing extreme torque and lining. They are available in varied sizes and are applicable in different industries.
 
Features:
 

• Perfect shutoff
• Standard design
• Easy to operate and install

Our engineered designs a wide range of conduit gate valve, available in a wide range of sizes, are suitable for bi-directional flow isolation. Designed for all oil and gas industry fluids including those of an abrasive nature. Typical applications are oil, gas, steam, hot water pipelines, subsea, storage above/below ground, manifolds, gas production, oil production and processing plant.

Features

• Through conduit passage - piggable
  
• Slab type gate to avoid jamming associated with wedge gate
  
• Pressure energized floating seat rings with PTFE inserts
  
• Minimum pressure drop as no pockets to create turbulence
  
• Weather proof operating system
  
• Easy maintenance - with valve in-line
  
• Specially designed die formed graphite packings, controlled clearances between stem, gland and bonnet bushing for guaranteed low emissions meet 100 ppm maximum fugitive emission levels.
  
• Outside screw and yoke construction
  
• Flanged end or Buttwelding end
  
• Valves provided with back seating arrangement
  
• Deep stuffing box - with lantern ring optional
  
• Self aligning two piece gland
  
• Anti-friction ball thrust bearings in yoke sleeve
  
• Locking arrangement optional
  
• Bi-directional shut off
  
• Optional gear and electric actuator available
  
• Flanged end dimensions conform to API 6D
  
• Ring joint facings available in higher classes
  
• Buttwelding end dimensions conform to ASME B16.25
  
• Face to Face and End lo End dimensions conform to API 6D
  
• Meets design requirement of API 6D

Dimensions on request lor sizes 2" NFS to 36" NPS in ratings 150 through 2500. For Buttmlding end details refer Page 32.

Materials

	Part Name	Material
1	Stem indicator	Stainless Steel
2	Stem enclosure	Carbon Steel
3	Relief valve
4	Anti friction bearings
5	Grease Nipple	Carbon Steel
6	Grub Nipple	Carbon Steel
7	Hand Wheel Nut	Carbon Steel
8	Hand Wheel	Malleable Iron / Cast Steel / Ductile Iron / Fabricated Steel
9	Yoke Nut	Carbon Steel
10	Yoke Sleeve	A 439-D2 / Al. Bronze, BS 1400, AB2C
11	Gland Bush	Stainless Steel
12	Back Seat
13	Stem	See Page 37 for
14	Seat Ring with PTFE	Trim Materials
15	Insert
16	Gate

	Part Name	WCB	LCB	WC1	CF8C
1	Stud and Nut	A 193 Gr B7 / A 194 Gr 2H	A 320 Gr L7 / A 194 Gr 4	A 193 Gr B 16 / A 194 Gr 4/7	A 193 Gr B 16 / A 194 Gr 4/7
2	Gland Packing	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
3	Gasket	Spiral Wound / Soft Iron	Spiral Wound / Soft Iron	Spiral Wound / SS304	Spiral Wound / SS 316L
4	Yoke	A216 Gr WCB	A352 Gr LCB	A217 Gr WC1	A351 Gr CF8C

We are manufacturing and designing of precisely molded ball valves ( trunnion mounted 2 Pice Desigin ) that have been reinforced with fiberglass for additional strength. These values are available in cast iron, stainless steel & gun metal owing to delivering high work output at different industrial applications.

Features

• Long operating life with low torque /
• Anti blow out stem construction
• Anti static device standard
• Soft seating recommended for service temperature up to 260°C.
  
• Extended gland provided for low temperature and cryogenic services (cold box and non-cold box applications) to conform to requirements of BS 6364
• Specially designed die formed graphite packings, controlled clearances between stem and gland for guaranteed low emissions meet 100 ppm maximum fugitive emission levels.
• Optional gear, electric actuator or pneumatic actuator available
• Locking arrangement optional
• Meets design requirement of ASME B16.34 / BS 5351 and API 6D and testing requirement of BS 6755/API 6D
• Fire testing conforms to API 607/API 6FA and BS 6755
• Flange end dimensions conform to ASME B16.5 / API 605 / BS 3293 / DIN
• Face to Face and End to End dimensions conform to ASME B16.10/BS 2080
• Buttwelding end dimensions conform to ASME B16.25

Material

	Part Name	Material
1	Handle	Carbon Steel
2	Lock nut	Stainless Steel
3	Gland nut	Stainless Steel
4	Thrust washer	Graphite filled PTFE / GRAFOIL
5	Gland Bush	See Page 37 for
6	Spindle	Trim Materials

	Part Name	WCB	LCB	WC6	WC9
1	Stud and Nut	A193 Gr B7/A194 Gr 2H	A320 Gr L7/A194 Gr 4	A193 Gr B16/A194 Gr 4/7	A193 Gr B16/A194 Gr 4/7
2	Stem Seal	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
3	Ball Seal	Graphite filled PTFE	Graphite filled PTFE	Graphite filled PTFE	Graphite filled PTFE
4	Body Seal	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
5	Ball	A217 Gr CA15	A351 Gr CF8M	A217 Gr CA15	A217 Gr CA15
6	Adopter	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9
7	Body	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9

	Part Name	C5	C12	CF8	CF8M
1	Stud and Nut	A193 Gr B16/A194 Gr 4/7	A193 Gr B16/A194 Gr 4/7	A193 Gr B7/A 194 Gr 2H	A193 Gr B7/A194 Gr 2H
2	Stem Seal	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
3	Ball Seal	Graphite filled PTFE	Graphite filled PTFE	Graphite filled PTFE	Graphite filled PTFE
4	Body Seal	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
5	Ball	A217 Gr CA15	A217 Gr CA15	A351 Gr CF

Our experts design a wide range of butterfly valves that are used to regulate the flow of liquid with the help of a section pipe. Their unique design comprises of a plate which is provided within the flow and allows to induce the pressure drop in the flow. They are manufactured from high grade raw material and are used in different industries.
 
Features:
 

• Versatile
• Energy efficient
• Durable
• Zero leakage

We offer an extensive assortment of non return valve and water check valve that are manufactured from qualitative raw material and allows a liquid to flow in one direction. These are installed in fix pipeline systems and are suitable for various industrial applications. They do not need any external pressure actuation and have the following features:
 

• Easy to use
• Durable
• Perfect finishing

The non return valve, swing check valve & lift up type check valve is designed to prevent backflow. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed.

Features

• Flanged end or Buttwelding end
  
• Tilting disc design available
  
• Renewable, seal welded seat ring or integral seat (cast S.S. only) available
  
• Optional counter weight, lever and dash pot arrangement available
  
• Meets design requirement of ASME B16.34 / BS 1868 / API 60 and testing requiremenl of BS 6755 and API 6D
  
• Flanged end dimensions conform to ASME B16.5 / API 605 / BS 3293 / DIN
  
• Ring joint facings available in higher classes
  
• Buttwelding end dimensions conform to ASME B16.25
  
• Face to Face and End to End dimensions conform to ASME 816.10 / BS 2080 / DIN

Metal

	Part Name	WCB	LCB	WC6	WC9
1	Bracket Stud&Nut	A193 Gr B7 / A194 Gr 2H	A 320 Gr L7 / A194 Gr 4	A193 Gr B16 / A194 Gr 4/7	A193 Gr B16 / A194 Gr 4/7
2	Cover Stud&Nut	A193 Gr B7 / A194 Gr 2H	A 320 Gr L7 / A194 Gr 4	A193 Gr B16 / A194 Gr 4/7	A193 Gr B16 / A194 Gr 4/7
3	Gasket	Spiral Wound / Soft Iron	Spiral Wound / Soft Iron	Spiral Wound / SS304	Spiral Wound / SS304
4	Hinge Bracket	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9
5	Hinge	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9
6	Cover	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9
7	Body	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9

	Part Name	C5	C12	CF8	CF8M
1	Bracket Stud&Nut	A193 Gr B16 / A194 Gr 4/7	A193 Gr B16 / A194 Gr 4/7	A193 Gr B7 / A194 Gr 2H	A193 Gr B7 / A194 Gr 2H
2	Cover Stud&Nut	A193 Gr B16 / A194 Gr 4/7	A193 Gr B16 / A194 Gr 4/7	A193 Gr B7 / A194 Gr 2H	A193 Gr B7 / A194 Gr 2H
3	Gasket	Spiral Wound / SS304	Spiral Wound / SS304	Spiral Wound / SS304	Spiral Wound / SS316
4	Hinge Bracket	A217 Gr C5	A217 Gr C12	A351 Gr CF8	A351 Gr CF8M
5	Hinge	A217 Gr C5	A217 Gr C12	A351 Gr CF8	A351 Gr CF8M
6	Cover	A217 Gr C5	A217 Gr C12	A351 Gr CF8	A351 Gr CF8M
7	Body	A217 Gr C5	A217 Gr C12	A351 Gr CF8	A351 Gr CF8

Higher sizes are wish dashpot arrangement to control the movement of the disc in order to avoid slamming and water hammer.
 

	Part Name	Material
1	Split Pin	Stainless Steel
2	Washer	Stainless Steel
3	Disc Pin
4	Hinge Pin	See Page 37 for
5	Seat Ring	Trim Materials
6	Disc

We are offering wide range of globe valve and steam globe valve. Our collection of investment casting steam globe valve are precisely made by using high quality raw materials and we offer these in cost effective range.

Features

• Outside screw and yoke construction
• Angle and Y-type design available
• Flanged end or Buttwelding end
• Valves provided witfi back seating arrangement
• Regulating, guided and sort seated plugs are available
• Extended bonnet provided for low temperature and cryogenic services (cold box and non-cold box applications) to conform to requirements of BS 6364
• Specially designed die formed graphite packings, controlled clearances between stem, gland and bonnet bushing for guaranteed low emissions meet 100 ppm maximum fugitive emission levels.
• Renewable, seal welded seat ring or integral seal (cast S.S. only) available
• Deep stuffing box - with lantern ring optional
• Self aligning two piece gland
• Anti-friction ball thrust bearing in yoke sleeve for higher sizes and classes
• Locking arrangement optional
• Optional gear, electric or pneumatic actuator available
• Meets design requirement of ASME B16.34/BS 1873 and testing requirement of BS 6755
• Flanged end dimensions conform to ASME B16.5 / API 605 / BS 3293 / DIN
• Ring joint facings available in higher classes
• Buttwelding end dimensions conform lo ASME B16.25
• Face to Face and End to End dimensions conform to ASME B16.10 / BS2080 / DIN

Materials
 

	Part Name	Material
1	Grub Screw	Carbon Steel
2	Hand Wheel Nut	Carbon Steel
3	Hand Wheel	Malleable Iron / Cast Steel / Ductile Iron / Fabricated Steel
4	Eye Bolt and Nut	Forged Carbon Steel
5	Cross Bolt and Nut	Forged Carbon Steel
6	Yoke Sleeve	A 439-D2 / Al. Bronze, BS 1400, AB2C
7	Grand Flange	Carbon Steel
8	Gland Bush	Stainless Steel
9	Back Seat
10	Plug Nut
11	Spindle	See Page 37 for
12	Seat Ring	Trim Materials
13	Plug

	Part Name	WCB	LCB	WC6	WC9
1	Stud and Nut	A193 Gr B7/A194 Gr 2H	A320 Gr L7/A194 Gr 4	A193 Gr B16/A194 Gr 4/7	A193 Gr B16/A194 Gr 4/7
2	Gland Packing	GRAFOIL	GRAFOIL	GRAFOIL	GRAFOIL
3	Gasket	Spiral Wound / Soft Iron	Spiral Wound / Soft Iron	Spiral Wound / SS304	Spiral Wound / SS304
4	Bonnet	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9
5	Body	A216 Gr WCB	A352 Gr LCB	A217 Gr WC6	A217 Gr WC9

We also offer a wide range of gate, globe & check valve in forged steel and alloy forged steel that are manufactured from qualitative raw material and are used in different industries, mainly high pressure or high temprature pipe line. Forge steel valves are follows standard of API 602 and are available in socket weld, screwed end. 

Our precision engineered designs a wide range of Y straiver that are applicable in various industries. They arte available with stainless steel, filter element of perforated sheet and wire mesh as per the client satisfaction. High grade raw material is used to fabricate these strivers.
 
Features:
 

• Flawless performance
• Filter elements are easily removable
• Durable