Polyohmer A1-FD is an air-drying insulating varnish based on phenolic resin. Useful for thermal Class B (130°C), it is used as finishing varnish and impregnating varnish to protect electrical machines and appliances against moisture and chemicals like dilutes acids, alkalies and transformer oil. The elastic varnish film is characterized by very good mechanical properties such as hardness, flexibility, penetration, adhesion and bonding strength. The cured film is resistant against moisture, dilutes acids, alkalies, chemicals like benzene & Toluene oils and tropical climate from 0°C to 55°C. It has good dielectric behavior and dielectric strength.

Application Method
Polyohmer A1-FD can be applied by spraying, brushing & dipping methods. Curing occurs at room temperature but can be made faster by heat. The supplied viscosity is used in application methods and second coat is done after 60 minutes, if desired.

Uses
Polyohmer A1-FD is used as a finishing, impregnating & coating varnish for stators, transformer, electric motors, transformer oil tanks, synthetic resins, stamping stacks, bonded phenolic laminates, circuit boards. Polyohmer A1-FD is also used to protect electrical appliances against chemicals & moisture.

Curing Schedule
• 8 to 10 hours at room temp (250C - 350C) or 1-2 hours at room temperature followed by 4 to 6 hours at 800 - 1000C
• Specimen Curing :- 48 hours of room temperature for each coat • Test according to IEC 464-II / IS 10026-II-1982

Packing
The range is available in following packs :
• Polyohmer A1-FD:- 200ml., 450gm., 900gm. & 4kgs. In PET bottles of 21 kg. & 180 kg. in metal containers.
• Thinner 145:- 850g., 4, 20 & 165 kg in metal containers.

 
Distinctive Properties & suggested uses.Polyohmer Fin (Red/Grey) is an air drying finishing varnish based on alkyd Resin. It is Red/Grey Pigmented quick air-drying, anti-tracking, Protective coating with good moisture, chemical resistance and excellent toughness .

Polyohmer Fin (Red/Grey) is used as a finishing. Varnish for stators, Armatures, Transformers, coils and other electricals devices to give Extra protection against chemicals, Moisture to the varnished windings.Polyohmer Fin (Red/Grey) can be applied by spraying, brushing & dipping methods.Polyohmer Fin (Red/Grey) contains pigments & fillers which have tendency to settle down on storage in layers. Hence it is necessary to stir the contents to a homogenous mass before use.

The range is recommended for impregnation of high speed rotor in electrical hand tools, kitchen motors, vacuum cleaners, locomotive motors and other machines exposed to frequent high loads. It is suitable for heavy duty equipment which is subject to mechanical vibrations at centrifugal stresses.

 Distinctive Properties & suggested uses

 • Polyohmer B-165 is an alkyd /phenolic resin based baking impregnating varnish having thermal class-B (Temperature 130°C).
 • It is suitable for the impregnation of electrical coil & windings of motors & transformers. Coils and armature windings impregnated with Polyohmer B-165 and baked correctly are sufficiently rigid to withstand high rotational speed without throwing of distorting such electrical hand tools.
• Polyohmer B-165 is also used for high voltage machines and devices which are exposed to humidity and tropical conditions.
• The cured varnish film gives high build, extra high bonding strength performance, greater flexibility, toughness, rigid properties and is resistance to chemicals, mild acids, alkalies & hot transformer oils.
• Polyohmer B-165 can be used in explosion proof electrical equipments.

It is a baking impregnating varnish that is useful for Thermal Class B ( 130ºC ). The cured varnish film is characterized by resistance to moisture and chemicals, excellent bonding strength, good dielectric properties, quick drying and curing, good flexibility, very good penetration power.

Distinctive Properties and Suggested Uses

• Polyohmer B-195 is a baking impregnating varnish based on Alkyd and Phenolic resins.
• Polyohmer B-195 is used as a baking varnish with shorter curing schedule for impregnation of windings of motor stators and transformers.

We are offering insulating varnishes POLYOHMER F-IX that is known for excellent penetration properties, clean draining and good stability. Further, these varnish films possess excellent dielectric properties, volume resistively, bonding strength and adhesion. The cured varnish film is resistant to humidity, mild acids and alkalis and transformers oils and have exceptional toughness. Used for class “F” 155°C extendable polyohmer F-IX varnish film is compatible with most types of insulation.

Application
POLYOHMER F-IX can be used for superior performance on stators, armatures transformers and coils. Because of high bond strength, it is used for high speed armatures such as a power tools without staving. It is suitable for electrical equipment like large machines requiring increased flexibility, polysterimide wires and fibre glass covering conductors. It can be used as binder varnish for glass mica sheets.

How to use
POLYOHMER F-IX varnish can be used as dipping, spraying and brushing methods. It can be used with vacuum application, having very good tank stability, The shelf life of varnish is 12 months in closed condition. Because of air drying nature viscosity can be maintained with POLYOHMER F-99 Thinner.

We are offering insulating varnishes POLYOHMER F-150 that are recommended for thermal class F(155???C).

Distinctive properties and suggested uses:
 • POLYOHMER F-150 is a baking impregnating varnish based on isophthalic alkyed resin.
• The cured varnish film is characterized high flexibility and very good elastic properties.
• Toughness adhesion and extra high bonding strength at operating temperatures.
• Resistant to humidity, mild acids and alkalies and chemicals.
 • Recommended for all type of electrical equipment such as high speed rotor, armatures, locomotive motors and large machines where is creased flexibility and Thermal class F(155???c) is required.
• POLYOHMER F-150 can be applied by vacuum and dipping methods.

We are offering insulating varnishes Polyohmer XL-FD that is an air-drying insulating varnish based on alkyd, phenolic and hard resins that is useful for Class E(120°C). It is suitable for versatile, economical fast drying, excellent glossy Golden air drying Insulating Varnish, Low viscous, having good bonding strength and electrical properties, our range is extensively used in various chemical industries. The cured varnish film is characterized by hard and tough film, moisture and chemical resistance against dilute acids, alkalies and transformer oils.

Application Method
Polyohmer XL-FD can be applied by spraying, brushing and dipping methods. The varnish filled tank is covered tightly to prevent losses of solvents, ensuring the viscosity is well maintained. Polyohmer XL-Thinner is used to get optimum viscosity for required application.

UsesPacking The range is available in following packs : • POLYOHMER XL-FD: 200ml, 500ml, 1 lt and 5 ltrs in PET bottles and 20 ltrs and 200 liters in M.S. Drums. • THINNER XL: 1 liter, 5 liter in PET bottles and 20 liter and 200 liters in M.S. Drums.

Polyohmer F35 is a wire enamel, based on Terephthalic acid polyester having temperature index 155°C and confirming IS-4800, part v. Polyohmer F 35 is suitable for wire range for 0.05 to 1.6 mm dia. It is characterized by balanced electrical, mechanical, thermal and chemicals resistance properties. The enameled wire processed with Polyohmer F35, gives excellent smooth surface , good cut- through stability, good flexibility and increased heat shock properties.

Polyohmer RG 35 is an economical wire enamel based on Terephthalic Polyester having temperature index 155°C class "F" confirming to is IS 4800, Part V. Polyohmer RG 35 is suitable for wire range of 0.05 to 1.6 mm. It has improved mechanical, chemical, electrical and thermal properties .

Polyohmer GRG 35 is an economical wire enamel with index 155°C class "F" confirming to is IS 4800, Part V. Polyohmer GRG 35 is suitable for wire range of 0.250 to 1.6 mm. Reddish golden in colour, it is used for winding wires of copper.

Polyohmer Poly shock is an economical wire enamel with Index 155°C class "F" confirming to is IS 4800, Part V. It is suitable for wire range of 0.5 to 2.00 mm dia. It is has superior mechanical, chemical, electrical and thermal properties and is dark reddish in color.

We are manufacturing and offering wide range of synthetic resins that are extensively used in different industries. Our range includes :

• Maleic resin 
• Synthetic resins
• phenolic resin
• Reactive polyadmire resin
• Non reactive poly amide resin
• Ketonic resin
• Alkyd resin
• Amino resin
• Epoxy resin