Lighting Poles

Our vast selection of high mast lighting poles is designed and manufactured for durability, wear and corrosion resistance, and visual appeal. We begin with the highest-quality materials for our designs, and fabricate poles and supports that meet your specifications and exceed your expectations for architectural lighting and a number of other applications, including:

Our vast selection of high mast lighting poles is designed and manufactured for durability, wear and corrosion resistance, and visual appeal. We begin with the highest-quality materials for our designs, and fabricate poles and supports that meet your specifications and exceed your expectations for architectural lighting and a number of other applications, including:

Conical Pole is a surface mounting, continuously tappered pole, provided with a foundation base plate. The conical pole with built-in cylindrical GI control box with service door is coated with epoxy zinc phosphate primer and finished with polyurethane based paint. The control gear tray is prewired with MCB, terminal connectors for loop-in loop-out and suitable for operation on 240V, 50Hz single phase ac supply. 
Applications : Street lighting in main roads / secondary roads, resorts, shopping centres and parks.

Building on a long-standing tradition of quality steel pipes & poles, we manufacture tubular poles & supply to client's nationwide for a variety of applications including utility, telecommunications and sports lighting. Our tabular poles are highlighted with the features like: Efficiency, Ease of installation, Reduced maintenance, Corrosion resistance, etc.

Swaged poles are manufactured from E.RW/Welded tubes of suitable lengths swaged & joined together. No circumferential joint shall be permitted In the individual tube lengths of poles. The longitudinal welds shall be staggered at each swaged joint. Swaging is done by Hydraulic Power Pack Unit A circumferential weld shall be deposit at the upper and of the joint at aslope of approximately 45⁰ poles are manufactured by us normally conform to As per IS 2713 (P-II)-1980 and special sires poles can also be manufactured by as per customer drawings or requirements

EARTHING ARRANGEMENT

If earthing arrangement is required, a bolt of 10 mm dia is welded on each pole at a height of 300 mm above the planting depth or can be provided as per customer's requirement

 

QUALITY CONTROL

We have arrangement for strict quality control right from the receipt of raw material upto the final stage. The outside diameter, thickness, length of sections and the length of the pole controlled to come within the required specification.

 

 

ADVANTAGE

Steel tubular Poles are the most efficient and economical source for carrying the overhead transmission and overhead distribution lines which no other source can take place. Owing to the circular cross section, the poles with stand torsinal stresses much better. Cylindrical surface offers minimum wind resistant and due to their elasticity, can take all sorts of shocks, cyclones. Thrust lines breakage etc. for better than any other type of poles Bring light weight permits easy handling, transportation, low depth erection and less maintenance cost which insured the greatest economy of steel tublar poles.

 

 

 

SWAGED POLES

• Based on the assumption that steel weights 7.85g/cm3 * Before making a selection of pole It is necessary to assume a suitable factor of safety has to be applied on the breaking load or the crippling load of the pole as the case may be depending on the relevant electricity rules to obtain the working load.

• Value of working load of the poles with a factor of safety of 2 on crippling load and a Factor 2.5 on breaking load are both given in tables 1 &2 In Indian standard book The user will have to calculate the working load if different actors of safety other then those stated above are applied.

• Length the tolerance of the length of section shall be follows : On the length of section + 40mm On the overall length + 10 mm.

• The mean weight for bulk supplied shall not be more than 5% below the calculated value the weight of any single pole shall not fall below the calculated weight more than 7.5%.

• Permissible tolerance on the tube thickness 10%.

We are a company that has command over the requisite manpower, talent, resources that has helped us to grow consistently. Our decades of valuable experience have assisted us to manufacture unmatched quality products. You will find our smart looking street lighting poles lighting the way on highways, main streets and small suburban lanes. They are equally suitable for illuminating new projects – sports complex, parks, petrol pumps, residential colonies and even airports. We are recognized as one of the foremost Lighting Poles Manufacturers and In India due to the fine quality of the products and their prompt delivery.

 

 

We present superlative quality Octagonal Poles. We are considered to be one of the principal Octagonal Lighting Poles Suppliers in India
Features :

• Octagonal Sided tapered steel pole
• Manufactured by press shaping of steel plates and welding them longitudinally
• Highly durable
• Available with in-built junction box and decorated brackets

Quality :

• Octogonal Street Light Pole is duly tested so as to assure their impeccable quality
• Resistant to rust
• Are available in various sizes
• Can be availed as per the customer’s specifications

Uses :

• For Street Lighting
• Used to light highways and main roads
• Area Lighting and Flood Lighting Purpose

Manufacturing Process Includes :

• Cutting to length,
• Trapezium cutting,
• Longitudinal folding,
• Longitudinal welding