Pneumatic/Hydraulic Lifts For Two/Three Wheeler

The pneumatic/hydraulic lifts for two/three wheeler are basically a platform required to stand the two wheelers coming for the servicing purpose. We provide a center stand for balancing the vehicle and to avoid the slipping or any sort of vibration in the vehicle. These lifts are operated with hydraulic pressure and equipped with a wheel vice, which helps in holding the vehicle properly.

We are into the manufacturing of superior quality pneumatic guns, tools and fittings, which are widely used in auto service stations. These tools are made high quality raw materials that provides them durability. Some of the features of these tools include :

I. Imported (P.U) coil hose pipe/hose reel
The polyurethane hose pipes are perfectly suited for installation that requires flexibility in a less space. The coil hose pipe comes with a male stud BSPT thread fittings and a length of 5mts, which can stand the pressure of 12 bars.

II. Extra heavy duty impact wrench
The air operated wrench with differential regulator allows the client to match the required power as per the job. The improved DYNA-PATCH clutch delivers high performance and extended durability. Handle exhaust provided with the equipment directs air away from the work piece and operator. The integral 360° integral swivel provided with the equipment protects the air hose from getting twisted or kinked.

III. Sockets for impact wrench
We provide sockets to clients, which are used for loosing and tightening of nuts and bolts of vehicles by impact wrench during service. We also supply screwdriver bits along with the product.

IV. Air blow gun
We use this products for cleaning the dust in vehicles during their service. These products are made of high quality raw material that provides them immense strength.

V. Filter- Regulator- Lubricator
We provide the complete F-R-L unit to clients, which is used for regulating the air coming from the compressor. The lubricator provided along with the products is used for lubricating the impact wrench fitted.

The hydraulic power pack offered to clients are required to lift two wheeler lift with hydraulic pressure. It has got high pressure positive displacement type gear pump, which is operated by electric motor. The hydraulic pressure developed by pump enables hydraulic cylinder of two vehicle lift for lifting. We also provide a foot operated manual pump, which is functional in the case of electric failure.

Technical Specifications
I. Motor Rating
0.5 H.P, Three phase, 1440RPM, TEFC or 1 HP, 1440 P.P.M, Single phase, 220 V A.C.

II. Maximum pressure of Hydraulic pump
207 KG/cm2.

III. Tank capacity
15-20 Lts.

IV. Oil grade
Hydraulic Oil – HYSPIN 68 castrol/ servo system 68 (Indian oil).

We offer to clients superior quality two post hoists, which are used in the servicing of two wheeler vehicles. Made of superior quality raw material, these hoists are manufactured by using latest technology that results in providing them great strength and durability. We offer these products to clients at the most competitive prices and the most prompt deliveries.

We offer to clients a variety of tables with tool board for engine room. These table have got stainless steel board along with tool board, which is provided for the purpose of hanging some special tools. It is easy to mount a hard vice on the top of the table that makes easier workmanship for service personnel. A wooden engine overhauling base is also fitted in the engine table to increase its special features. Engine jig, an instrument is also fitted on the table with the purpose to over haul the engine of the two wheeler without loss and harm of any part of the engine.

We offer to clients a high performing parts cleaner, which is provided with lots of jets that helps to throw the kerosene with larger pressure and is best for the cleaning of internal parts of the engine or any dismantled part of the vehicle. All such functions are done with the help of the foot paddle switch provided at the base of the washer. The user can easily clean the parts by putting his hands into the chamber through two ports provided. A light is also provided that helps in better cleaning of automobile parts.

Oil dispensers offered to client is a unique machine that is used for filling oil into the gear box of engine of two and three wheelers only at the press of a button. Quantity of the oil is set and the button is pressed, which results in filling the exact quantity of oil in to the vehicle without much worries. It is comparatively a faster process that fills one liter oil in a scooter in 50 seconds.

Technical Specifications

I. Input Power: AC Single phase, 230 Volts.
II. Electric Motor: 0.25 HP, Single phase TEFC
III. Pump Capacity: 1.25 LPM

The high quality oil disposer offered to client is used for the disposal of waste oil removed from the engine of two wheelers. It has got an air proof tank with the capacity of 50 lit. the acrylic bowl fitted on the tank is used to check the quality and quantity of the waste oil. An inlet port is provided to remove the waste oil from tank with the help of air pressure. It is a mobile unit, which can be carried to any place in the work shop that makes the work easier.

The chain cleaning machine is best suited to both clean & lubricate vehicles chain in an enclosed environment so no messy residue is release. The special internal brush system both clean the chain thoroughly is a safe manner. Then allow to lubricate the chain, getting the lub in right place and in right amount.

The trolley for tools are made of superior quality plastic and used for keeping various tools and dismantled parts of the vehicle during its servicing. In order to keep the documents and papers of the vehicle in a safest manner, we also provide an adjoined stand in our product range. The product is tested in terms of its strength and durability so that it provides high performance level to client.

We offer the most advanced quality battery charge/tester used regarding the servicing of vehicles. The battery charger provided to clients is designed in a way to charge the latest technology batteries used in motorcycles and scooters. The battery charger are available up to 96 volts with the maximum output of 1 AMP, with the capacity of charging 1 to 8 number of 12V batteries at a single time. The battery tester offered to clients is used to test 12V batteries of motor cycles. The unit also checks the voltage of the charging system. We can use the tester in both horizontal and vertical positions.

The workstation panels offered to clients have got integral structure designed for tool box, sign board, pneumatic pipeline along with adapters to hold pneumatic wrenches and air gun.

Our products have got following features:

• Lights provided for better visibility
• Proper positioning of power tools to enhance safety
• Reduced mechanic fatigue due to easy accessibility of tools