Our Products
- Micromot Drill Stand
- Universal Holder Milling Machines
- MICRO Compound Table
- MICROMOT Steel shaft
- Micromot Tool Holder
- Protectived device for Hand-operated Micromot Machines With
- Micromot Steel Collet Set
- Three Jaw Steel Drill Chuck
- Precision Vice
- Router Base
- Engraving Device
- Drilling Device
- Machine Vice
- Foot Switch
- Micromot Extension Cord 300 Cm.
Accessories For Handheld Tools
Micromot Drill Stand
Get Latest Price
Geared rack and pinion feed with return spring allowing effortless and sensitive operation. Practical drill depth scale with adjustable limit stop (maximum travel 40mm). With standard 20mm collar for MICROMOT drilling and milling devices. With solid, hard chromium-plated steel column (280 x 20mm), throat capacity (column inside to centre of tool) 140mm.
Plane-milled table (220 x 120mm) with parallel limit stop and scale. Drilled, tapped holes for securing the MICRO compound table KT 70 and holes to fix the drill stand itself are also provided. Weight 2.2kg.
NO 28 600
Note:
Our designers prefer die-cast aluminium. A refined, rust-proof and statically solid material. Fittings and feeds are machined on our highly modern CNC-controlled machines (milled, line-bored, lathed, etc.). Pure precision!
Machine vice MS 4
Die-cast zinc. With three machined sides. The slot fits the adjustable fence of the drill stands MB 200 and MB 140/S as well as the bench drill TBM 220. Horizontal and vertical V-slots in jaw. Jaw width 50mm and height 10mm. Maximum clamping width 34mm.
NO 28 132
Additional Information:
- Item Code: MB-200
View Complete Details
Micromot Drill Stand
Get Latest Price
NO 28 606
Note:
Our designers prefer die-cast aluminium. A refined, rust-proof and statically solid material. Fittings and feeds are machined on our highly modern CNC-controlled machines (milled, line-bored, lathed, etc.). Pure precision!
Additional Information:
- Item Code: MB-140-S
View Complete Details
Universal Holder Milling Machines
Get Latest Price
NO 28 610
Note:
Professional drill/grinder IBS/E is not included in the delivery.
Additional Information:
- Item Code: UHZ
View Complete Details
MICRO Compound Table
Get Latest Price
Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the MICROMOT standard (12 x 6 x 5mm). Adjustable ruler eases workpiece positioning. Both handwheels have zero-resettable dials with graduations indicating 1 revolution = 1.0mm and 1 division = 0.05mm. The clamps and securing bolts for the MB 140/Sand TBM 220 are included.
Other technical data:
Table size 200 x 70mm. X travel 134mm and Y travel 46mm, maximum height 43mm.
NO 27 100
Note:
The MICRO compound table KT 70 is now also available as KT 70/CNC-ready (with two stepping motors for the axes X (transverse) and Y (lengthwise).
Step clamps made of steel
The step clamps set is supplied with the KT 70, but can also be ordered separately. Set consists of 2 stepped blocks and clamps, T-slot nuts of the MICROMOT standard, bolts. For work pieces up to 20mm thickness.
NO 24 256
- Two step clamps are included.
- Table of 200 x 70mm with 3 T-slots.
- Handwheels with adjustable dial (1 revolution = 1mm, 1 division 0.05mm).
- Moveable ruler eases workpiece positioning.
For machining circular work pieces, manufacturing off-set holes and milled out portions, milling key surfaces, four-sided, sixsided materials, etc. Absolute accurate division due to nonius at the base body. With reversed chuck jaws: Capacity inside 1.5 to 32mm, outside 12 to 65mm. Bore of 11mm (for processing longer spindles in a vertical position). With fastening bores for horizontal and vertical mounting and suitable slot nuts and fastening screws for mounting to theMICRO miller MF 70 and the MICRO compound table KT 70. Size 72 x 64 x 38mm. In wooden box with sliding lid.
NO 24 264
Additional Information:
- Item Code: KT-70
View Complete Details
MICROMOT Steel shaft
Get Latest Price
NO 28 620
Additional Information:
- Item Code: 110-P
View Complete Details
Micromot Steel Shaft
Get Latest Price
As described above, but with 0.3 to 3.2mm quick-action chuck.
Practical when working with different shaft diameters.
NO 28 622
Additional Information:
- Item Code: 110-BF
View Complete Details
Micromot Tool Holder
Get Latest Price
NO 28 410
Note:
Super jig saw STS/E and precision vice FMS 75 are not included in the delivery.
View Complete Details
Protectived device for Hand-operated Micromot Machines With
Get Latest Price
standard 20mm collar
For work with saw blades, cutting discs, milling bits, grinding tools, steel brushes and polishing tools. Maximum useable tool diameter 22mm. Easy to assemble.
NO 28 944
View Complete Details
Micromot Steel Collet Set
Get Latest Price
1 each of 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm.
With clamping nut and holder for storage.
NO 28 940
Note:
Our drill chuck (NO 28 941) provides more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets: Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.
- MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, fourslit collets of brass and aluminium).
- The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface.
- This is especially important for cutters with small shaft diameters.
View Complete Details
Three Jaw Steel Drill Chuck
Get Latest Price
Note:
Drill chucks provide more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets: Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.
View Complete Details
Precision Vice
Get Latest Price
NO 28 608
Additional Information:
- Item Code: FMZ
View Complete Details
Precision Vice
Get Latest Price
NO 28 602
Additional Information:
- Item Code: FMS-25
View Complete Details
Router Base
Get Latest Price
NO 28 566
Note:
Depicted rotary tool and drilling bit are not included in the scope of delivery.
10-piece wood router cutter set
Carbide cutters. For wood, fibre boards and plastic. Clean relief grinding ensures good work results and surface quality. High stability. All shafts 3.2mm.
NO 29 020
Attention:
The wood router cutters offered here may only be used with working devices that have a safety mechanism. For example MICRO shaper MP 400.
Additional Information:
- Item Code: OFV
View Complete Details
Engraving Device
Get Latest Price
For engraving letters, numbers and individual shapes on metal, plastics, glass or stoneware. For name plates, jewellery or valuable materials. Also easy to manufacture miniature, individual shapes, engravings, cut-outs and outline shapes, even in series, using self-made templates or commercially available templates (plants, animals, coats of arms).
Guide bar (template holder) holds a maximum of 14 letters. Template contours are precisely to be followed using the guide marker (ball handle).
The lettering to be milled is scaled down during transfer. The transfer ratio can be fixed at 2:1, 3:1, 4:1 or 5:1 by simply adjusting two screws. The work piece is aligned and fixed on the movable guide block with clamping jaws (here MICROMOT clamping jaw set NO 24 256) or a vice.
Scope of delivery: two sets of letters from A to Z, incl. hyphen, full stop and slash (total 52 items), one each HX key 1.5 - 3 and 5mm as well as a HX (ball head) screwdriver 2.5mm. Complete with a comprehensive instruction manual.
NO 27 106
Solid carbide stylus for engraving device GE 20
For steel, cast steel, non-ferrous metal, plastic, glass, stoneware and tiles. Nose angle 60° (for V-shaped letters). Shaft diameter 3.2mm.
NO 28 765 Letter width 0.5mm
NO 28 766 Letter width 1mm
Stencil set for engraving device GE 20
Letters A - Z, incl. hyphen, full stop and slash. Also numbers 0 - 9. For use with guide bar of the GE 20.
NO 27 104
Note:
Professional drill/grinder IBS/E and clamping jaws are not included in the scope of delivery
Additional Information:
- Item Code: GE-20
View Complete Details
Drilling Device
Get Latest Price
The standard 20mm collar enables precise clamping of the drilling device such as the precision drill/grinder FBS 240/E, professional drill/grinder IBS/E, long neck straight drill/grinder LBS/E, MICROMOT 50, 50/E, 50/EF and MICROMOT 230/E.
NO 20 002
Note:
Professional drill/grinder IBS/E and step clamps are not included in the package.
- Preselectable drill depth using depth control with easily readable scale.
- 20mm collar fit for precise clamping of drilling devices.
- Articulated arm pivotable in two directions.
- Flat-milled, solid base plate with 200 x 200mm usable table area and 2 continuous T-slots.
Additional Information:
- Item Code: BV-2000
View Complete Details
Machine Vice
Get Latest Price
NO 28 132
Additional Information:
- Item Code: MS-4
View Complete Details
Foot Switch
Get Latest Price
NO 28 700
Additional Information:
- Item Code: FS
View Complete Details
Micromot Extension Cord 300 Cm.
Get Latest Price
NO 28 992
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited