We offer following categories of Oil and Liquid Lubricants: • OKS 1000 Silicone Oils Mould Release Agent: Used for injection moulding and extrusion of plastics etc. • OKS 300 MoS2 Mineral Oil Concentrate: Used as an addition to mineral oils of any kind to increase their load bearing capacity and EP properties. • OKS 330 High-Speed. High Synthetic Oil: Used for roller bearings, operating at very high speed, bearings in turbines, synchronous motors and gears of sophisticated equipment. • OKS 345 Plus Lubricating Washable Oil: Used in all machinery where non-staining, washable oil is recommended. • OKS 352 High-Temperature Chain Oil - with Mox - Active: Used for the liquid lubrication of chains, stentors, joints, slide ways, open bearings etc., operating at low or high temperatures and / or operating under heavy loads up to +210°C. • OKS 352 / 1 High-Temperature Chain Oil: Used for the liquid lubrication of chains, stentors, joints, slide ways, open bearings etc. • OKS 352 / 2 High-Temperature Chain Oil: Used for the liquid lubrication of chains, stentors, joints, slide ways, open bearings etc. • OKS 370 Multi-Purpose Oil for the Food Industry: Used for lubrication of valve seals, collars, O-rings, drives, piston rodes and guide ways of valves etc. • OKS 3700 Food Grade Oil: Used for lubricating chains, cutting knives and other equipments. • OKS 3701 Food Grade Oil Spray • OKS 3720 Gear Oil for the Food Industry • OKS 3730 Gear Oil for the Food Industry • OKS 3760 Multi-Purpose Oil for the Food Industry • OKS 450 Adhesive Chain Lubricant • OKS Vanishing Oil Stamping Oil for Sheet Metal

We offer a wide spectrum of Powder Paste Lubricants, such as: • OKS 110 Micro-Refined MoS2 Powder: Used for dry, permanent lubrication of extremely smooth surfaces, for precision machining, as a dry lubricant for precision cold forming. • OKS 1103 Heat Sink Paste: Used for dissipation of heat in sensitive electronic components like sensors, measuring devices and semiconductors. • OKS 1104 Silicone Paste: Used as translucent silicone-based paste used in moisture-proof dielectric seal for ignition systems, electrical and electronic equipment. • OKS 200 MoS2 Assembly Paste - with MoX - Active: Used as a standard assembly lubricant for the basic treatment of metallic sliding surfaces of every kind. • OKS 240 Anti-Seize Compound - upto +1100°C: Used for the protection of threaded connections, exposed to high temperatures or corrosive atmosphere. • OKS 246 Anti-Seize Compound - upto +600°C: Used for lubricating and maintaining easy action of screw-joints subjected to high temperatures and corrosive influences. • OKS 250 White All-Round Paste, Metal Free: Used for lubricating all kinds of surfaces subject to high load. • OKS 255 Extreme Temperature Paste: Used as a assembly lubrication for screw joints subject to high temperature and corrosive environment. • OKS 260 White Assembly Paste: Used for assembly lubrication where dark lubricants are undesirable. • OKS 265 Chuck Jaw Paste: Used for assembly lubrication of friction and sliding surfaces under heavy, jerky and vibrating stress etc. • OKS 280 White High-Temperature Paste: Used for lubricating hot forming operations such as drop forging, hot extrusion moulding etc.

We offer a wide spectrum of Bonded Coatings like: • OKS 500 - MoS2 Bonded Coating, Heat-Curing: Used as dry lubrication with solid lubricants, as longer effective deposit layer for slow speed and high pressure operations e.g. on ways, joints, ball and socket joints and similar components where occasional movements occur. • OKS 510 - MoS2 Bonded Coating, Fast-Curing: Used as dry lubricant coating for sliding surfaces operating in dirty / dusty atmospheres. These can also be used for joints and sliding surfaces of earth moving equipment, for the running-in gears etc. • OKS 511 - MoS2 Bonded Coating Spray: Used as a dry lubricant coating for sliding surfaces operating in dirty / dusty atmospheres. The lubrication of coarse chains and guide ways operating under high loads and exposed to high temperatures can be effectively done. • OKS 530 - MoS2 Water-Based Bonded Coating, Air-Curing: Used for dry lubrication with solid lubricant as longer effective deposit layer for slow speed and high pressure. • OKS 536 - Aqueous-Graphite Bonded Coating, Air-Curing: Used as dry lubrication where up to now MoS2 or graphite pastes (staining, oily or harmful to health) or powders (dust) have been used. They can also be used for chain lubrication. • OKS 589 - MoS2 Bonded Coating, Heat-Curing: Used in those applications where there is a low sliding speed and high surface pressure, for example in levers, slide ways, linear guide systems, spindles etc.

We offer following range of Greases as listed below: • OKS 1110 Silicone Valve and Packing Grease. • OKS 1110/6 Silicone Valve and Packing Grease. • OKS 1112 Silicone Grease for Vacuum Taps. • OKS 1114 Stop Cock Grease. • OKS 1122 Grease for Life-Time lubrication. • OKS 1140 High-Temperature Silicone Grease. • OKS 1184 Silicone Grease. • OKS 400 MoS2 Multi-Purpose Heavy Duty Grease. • OKS 403 Grease for Saline conditions. • OKS 405 Lithium soap, MoS2 based Multi-Purpose Grease. • OKS 410 MoS2 High-Performance Long Life Grease. • OKS 416 Low Temperature, High Speed Grease. • OKS 418 High-Temperature Grease. • OKS 420 High-Temperature Multi-Purpose Grease. • OKS 422 Universal Grease for Long Life Lubrication (-40°C to +180°C). • OKS 4220 Extreme Temperature Bearing Grease (upto +280 °C). • OKS 423 High Temperature Grease. • OKS 424 Synthetic High Temperature Grease (-30°C to +200°C). • OKS 428 Multi-Purpose Fluid Grease. • OKS 432 High Melting point Bearing Grease (-25°C to +180°C). • OKS 462 Grease for Hot and Cold Water Fittings. • OKS 470 White, Universal Heavy-Duty Grease. • OKS 475 Food Grade Grease. • OKS 475 HS High-Speed Bearing Grease. • OKS 475 Super High Speed, Low Noise Bearing Grease. • OKS 476 Multi-Purpose Grease for Food Industry. • OKS 479 High-Temperature Grease for Food Industry. • OKS 480 Synthetic High-Temperature Grease. • OKS HD 1250 MO High Performance EP Grease. • OKS HIGHTEMP 460 Aluminum Complex Soap Grease – fortified with Mox Active. • OKS L - KW Long Life EP Grease - fortified with Mox Active. • OKS LC Premium Water Washout Resistance Grease - fortified with Mox Active. • OKS Super High-Pressure, Multi-Purpose Grease - fortified with Mox Active.

Our Corrosion Protection Liquids includes following listed products: • OKS 2100 Anti-Corrosion Wax Coating: Used for protecting finely machined metal surfaces such as tools, dies, moulds, including plastic injection moulds, spare parts, machines etc. against corrosion during storage and transport, even under industrial atmosphere, tropical climate and marine conditions. • OKS 2110 Short-Term Corrosion Protection Liquid with Solvent Base for Indoor Applications: They form an excellent corrosion protection for castings, forgings, tools, shafts and other semi-finished and machined parts and components, during temporary storage between machining operations. • OKS 2140 Long-Term Corrosion Protection Liquid with Solvent Base for Indoor Applications: Used to protect transmissions, hydraulic pistons and cylinders, tools, machines, pipes, equipments etc. • OKS 2160 Long-Term Corrosion Protection Liquid for Outdoor Applications: Used for protecting dies, valves, forgings, castings, stampings, pipes, fasteners, structurals, machinery, shafts, etc. during storage and shipping in outdoor environments including harsh marine atmospheres and offshore conditions. • OKS 2600 Heavy Duty Cleaner and Degreaser: Used for cleaning and degreasing metal surfaces before surface treatment, for cleaning of bearings before lubrication, for removing oil, grease, and dirt residues from assemblies etc. • OKS 360 Oil-Based Heavy-Duty Corrosion Inhibitor: Used for protecting semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles etc.; during storage and transport, even in extreme weather like costal and marine atmospheres. They can also be used for protecting plastic injection moulds.

We offer a varying range of Aerosols as listed below: • OKS 2201 Corrosion Protection Cum Contact Cleaning Spray: Used for corrosion protection of the control panels, printed circuit boards, contacts and other electronic components. Electrical equipments and parts, as a general purpose cleaner of oil, grease, wax and dirt. • OKS 2211 Corrosion Protection Spray: Used for protecting tools, dies, moulds, machine guide ways, keys, shafts, measuring instruments etc. • OKS 2511 Zinc Anti-Corrosion Coating: Used in the repair of galvanized or hot dip galvanized surfaces damaged by cutting and machining operations; restoring undercoat and varnish coats damaged by gas welding or arc welding operations; Protection against corrosion of metal surfaces etc. • OKS 2521 Zinc and Aluminium Gloss Spray: Used for repairing of zinc-coated surfaces which have been damaged by welding, machining or cutting without subsequent painting; 2 fold coating sufficient as corrosion protection even when subject to weathering. • OKS 2531 Aluminium Metallic Spray: Used in renovation of newly galvanized surfaces which have been damaged by welding or machining, renovation of aluminium rims damaged mechanically (impact of stones) or chemically (spreading salt), as an adhesive corrosion protection. • OKS 361 Oil-Based Heavy-Duty Corrosion Inhibitor Spray: Used for protecting semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles, etc. during storage and transport. They also protect plastic injection moulds. • OKS 3681 Solvent-Based Heavy-Duty Corrosion Inhibiting Spray: These are the removable coating that provide optimal corrosion protection for metals exposed to indoor as well as outdoor environments.