Two set point temperature controllers are commonly used as energy savers. For initial fast heating up with low set point and higher rated heating coils or burners, the high set low rating for maintaining temperature constantly and economically.

Setting : Through two nos. multi turn trimpots provided at front panel.

Salient Features:
Input signals from Thermocouples for a range from 0 to 1700° C and for RTD sensors range from - 200° C to 400° C.

Model No: OES/2SP/909B
Dimension :   96 x 96 x 137 mm.

We offer an array of digital temperature controllers that are used for regulating temperature of an object. It is completed by measuring the existing temperature and making adjustments in ingress or egress of thermal energy to attain the ideal temperature. These controllers find usage in industries of textile, frozen products, metal, medical and many more.

Different sensors are used for the desired temperature control range. In our temperature controller uses of proportional controller minimizes overshoot and undershoot of the furnace and entirely eliminates contact problem associated with relay and contactors. The measured temperature is displayed on a digital LED display.

The standard features of our controller are:

• Automatic cold junction compensation (Thermocouples)
• Broken sensor indication & sensor linearization
• Using DFG techniques are the standard features
• High accuracy.
• Display, measure and control temperature of furnaces over wide range.

Model (3C) 603A: OMEGA offers compact, economical and accurate instruments ideal for use in multi step rubber molding presses and many other special applications.

The salient features of model (3C) 603A are:

• 3 Individual signals for each channel.
• Three nos potential free relay output terminal sets at back panel. SSR output .
• Also available in this model on request.

Dimension: 96 x 240 x 150 mm.
Accuracy: 0.5% of Full Span
Control Mode: Proportional or ON/OFF.

Digital Temperature Controller
(Model No. OES/DTC/Series A, B, C/909/729A/729B)

OMEGA serves a series of digital temperature controllers with high accuracy and different functions such as with proportional band or ON/OFF types. Ideal for most precision temperature control processes in laboratories, R&D applications and precision engineering industries. Output of the controller can be provided through potential free relay contacts or solid state relay.

Salient Features:

Filter free Digital LED Display with 10^ºC readability process variable and set point read out Inputs from various types of Thermocouples or RTDs

Dimensions :

• M - 909 - 96 x 96 x 137 mm
• M - 729A - 96 x 96 x 100 mm
• M - 7298 - 72 x 72 x 125 mm

Range: 0 to 1700ºc for thermocouples -200ºc to 400ºc for RTDs
Accuracy: ±1 % of full span.

Set Value/Process Value Display

Model: OES / SVPV /909B & DTC 489

We manufacture, export and supply this product range with set value/process value display model: OES/SVPV /909B & DTC 489. These products are known for their excellent quality, sensible prices and special designs and shapes.

Model: SVPV /909B

These digital temperature controllers have 2 sets of displays, the top row indicates the process temperature and the bottom row indicates the set temperature.

Control mode: Proportional band or ON/OFF types are available.
Salient Features: Input Sensors K, J, R, S & PT 100 Range Upto 1700ºc.
Input Power Supply: 230 V AC or 12V, 24 V DC (To be specified).
Dimension: 96 x 96 x 137 mm.

SV /PV /T-DTC-489

This model is a tiny and compact one, with process temperature display on top and with set value modifiable through push button. Numeric thumb switches at bottom:

Type of Sensor: K & J
Range: 0 to 999ºc.
Input Supply: 230 V AC.
Dimension: 48 x 48 x 110 MM.
Specifications:

These models are compact, economical and accurate instruments ideal for use in multi step rubber moulding presses and many other special applications. Inputs from thermocouples or RTDs.

Salient  Features: 3 Individual signals  for each channels. Three nos potential free relay output terminal sets at back panel. SSR output also available in this model on request.

Control Mode: Proportional or ON/OFF.
Accuracy:  ± 0.5% of Full Span
Dimension:  96 x 240 x 150 mm.

These blind temperature controllers are commonly used in plastic injection moulding and rubber industries, packing units, baking ovens etc. These blind temperature controllers are without display and have provision to set temperature through printed dial, disc and with knob. Series A & B with proportional band control to avoid overshoot and undershoot of temperature. Series A with deviation meter to access the variation of set temperature through the meter. Series B without deviation meter.

Dimensions of our blind temperature controllers is as follows: 

• 96 x96x 137 mm (Series A & B)
• 96 x 96 x 110(series&D)
• 72x72x125(SeriesE&F)

OMEGA presents a portable temperature indicator with 31/2 digit LCD display for measuring temperature of various processes accurately, such as chemicals, liquids, etc with leaf type and immersion probes.

Power Supply : 9V DC Battery
Range: Upto 1200°C.

OMEGA present high precision temperature transmitters usable with thermocouple inputs of K J & RTD PT 100.

Range: Upto 1200°C Output:4to20mA.
Available in both rail mountable & head mountable models.

We offer digital timers or time relay switches, where the time can be attuned and set to active a relay after the elapsed time. These entities are displayed on the front display. We also offer universal timers, in which time, unit of time, relay logic and mode of operation can be set by the user. Its salient features include:

• Delayed On/Off programmable by user from front panel.
• Up/Down time counting user settable, user settable starting On/Off time for cyclic mode.
• Number of cycles settable for cyclic mode.
• Non-volatile memory to save configuration and timing.
• Configuration lockable by rear jumper.
• Front Reset/Start switch with parallel terminals at rear.
• Aesthetically designed panel with membrane switches.

Digital Timer

Model: OES / TMR /369A & B
Control mode: Delay ON or OFF, Cyclic & programmable ON/OFF types are available.
Salient Features: Bright 1/2" LED display for seconds, minuted and hours. Setting: through push buttons or increase/decrease thumbnail keys
Input Power Supply: 230 V AC 50hz/24v or 12V,DC
Dimension: 96 x 96 x 137 mm (m-369A)
                 72 x 72 x 110 mm (M 369B)

Digital Counter

We offer  series C & D counters, for RPM Indications and object counting in packing divisions of biscuit manufacturers, pouch packing units for tea, food grains, spices & powders, supari and other items. The counters are manufactured with built in recharegable battery for retaining memory during power failures

Model No : 369 C & D
Dimension: 96 x 96 x 110mm or 72 x 72 125mm
Range: upto 99999
Power supply: 230 VAC

OMEGA offers a wide range of imported equipments, such as temperature programmers, pid controllers, thyristor power packs, ac drives, plcs, hybrid recorders, self balancing recorders, temperature data loggers and many more precision instruments manufactured by Autonics Corporation (Korea) and Shinko Technos Co Ltd., (Japan).

Catalogs and technical detail are available on request for the specific product required. Our well experienced technicians will be available for any kind of assistance in operation or maintenance.

OMEGA manufactures highly accurate & sophisticated control panels for furnaces & ovens for various type of operations with automations, thyristor power packs, PID controllers, timers, recorders Etc., for wide range of applications.

The panels are fabricated using high-grade steel, and are duly powder coated. The size, volume, and the air circulation arrangement of the panel are chosen as per the requirement. Depending upon the requirement and application of heating system and desired degree of temperature accuracy the temperature controllers, controlling method and the end-controlling device are selected.

OMEGA offers wide range of electric ovens & furnaces for heat treatment, annealing, ageing, socking, stress, releaving, pre-heating.

Various types of ovens we offer are:

• Baking Ovens
• Air Circulated Ovens
• Preheating Ovens Etc.

These are use for various applications as per customer specification & requirements.

Industries we cater to include:

• Major public sector units
  
• Cement & steel industries
  
• Foundries sugar factories
  
• Heat treatment units

OMEGA offers a wide range of custom built thermocouples, RTDs (PT100, PT50 & PT1000) with suitable outer sheathing to suit thousands of process applications, such as heat treatment, furnaces, ovens, thermal power stations, fertilizer and chemical plants, cement & sugar plants, plastic & rubber industries, steel plants, etc, We manufacture various kinds of heating elements, such as ceramic & mica band heaters for injection moulding units, cartridge & U shaped air  eaters, finned beaters, refractory heaters, immersion heaters for water, oil & chemicals.

Heating elements for industrial furnaces and ovens made out from KANTAL A1, D, Nikrothal or Nichrome wires and strips for temperatures upto 1200 °C, as per customer's specifications and drawings.